Used Drum - Grinding And Polishing Machine for sale (71,718)

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose Hedpfx Abeyw Rhmo Tot - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: like new (used), Year of construction: 2018, The device has only 77 hours of operation and is in like-new condition. For professional semi-automatic or manual preparation of metallographic samples (grinding or polishing). Technical data: Item specification: Tegramin-25 Disc diameter: 250 mm / 10 inches Speed: 40-600 rpm, variable Rotation direction: Disc rotates counterclockwise Motor: 750 W / 1.0 HP Torque on the disc: Continuous at < 300 rpm: 23.8 Nm Continuous at 600 rpm: 11.9 Nm Max. > 40 Nm Head speed: 50-150 rpm, variable Rotation direction: Clockwise / Counterclockwise Head motor: 120 W (0.16 HP) Torque: 7.5 Nm Software and electronics: Control: Touch panel and rotary / push-button Memory: FLASH-ROM / RAM / NV-RAM Display: LC TFT, color screen, 320x240 pixels, LED backlight Stopping mechanisms: Emergency stop Power supply: Voltage / Frequency: 200-240 V / 50-60 Hz Power connection: Single-phase (N+L1+PE) or two-phase (L1+L2+PE). Rated power: 1060 W No-load power: 5 l Current draw, nominal: 5.3 A Current draw, max.: 10 A Water pressure: 1–10 bar / 14.5–145 psi Water inlet: Ø ¾ inch Water outlet: Ø 40 mm / 1½ inch Compressed air inlet: Ø 6 mm / 1¼ inch Compressed air: 6–10 bar / 87–145 psi Air flow: 3.5–4 l/min Hjdpezwx Npofx Ab Tst Dimensions and weight: Width: 67.5 cm / 26.6 inches Depth: 75 cm / 29.5 inches Height: 56 cm / 22.0 inches Weight: 90 kg / 198 lbs Weight: 90 kg Equipment / accessories: * automatic sample preparation head, * holder / disc for mounting samples, * automatic dispensing system for suspensions and polishing agents, * set of containers and dispensing tubes, * accessories shown in the pictures, * discs and consumables included in the set.

Year of construction: 2018, condition: ready for operation (used), Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible. Hodpfx Ajxg Rhpsb Tjt

Condition: used, Year of construction: 1990, working area D= 30 mm speed 20 m/min Bar length 3000- 6000 mm Hedozl E Rcspfx Ab Tst weight of the machine ca. 3 t dimensions of the machine ca. 9 x 2 x 2,4 m Belt grinding line with 2 grinding units for pipes and bars. Surface of round material is grinded by through feeding.

Condition: used, KED II HDZ drum sander or belt sander for sanding timber and other materials. Technical data: Hsdpfxoztvzuo Ab Tst - Sanding belt: 300 x 1,010 mm - Motor: 2.2 kW - Dimensions (L x W x H) approx.: 1,050 x 600 x 1,000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MM3146 230V Drum Roller Sander for Wood is an efficient, single-unit sanding machine designed for finishing flat surfaces made of solid wood, furniture boards, metal components, and plastics. Thanks to its robust construction, precise guidance system, and large-diameter sanding drum, the machine provides uniform surface finishing with high working efficiency. It is an ideal solution for production facilities, woodworking workshops, and companies involved in renovation and finishing processes. Main advantages of the machine Reinforced construction – a rigid, heavy-duty frame minimizes vibrations and ensures stability even during intensive operation. Precise sanding thickness adjustment – a mechanical height gauge allows accurate setting of the required machining dimension. Precisely balanced sanding drum – made of drawn aluminum, it ensures even contact with the workpiece and effective cooling. Universal application – suitable for removing old paint, varnish, corrosion, as well as smoothing and deburring surfaces. Metal drive coupling – provides durable and reliable transmission of torque from the motor to the sanding drum. Working width up to 920 mm – allows sanding of wide panels using a double-pass method. Construction and technology The CORMAK MM3146 stands out with its solid industrial construction. The 1.5/2.2 kW (S1/S6) main motor, combined with a reinforced 60 W feed drive, provides sufficient power reserve for intensive, long-term operation. The variable feed speed system (0–4 m/min) allows adjustment of the working pace depending on the material type and required surface quality. The sanding belt measuring 2100 × 75 mm drives a high-speed roller (2800 rpm), enabling fast and effective material removal. The aluminum sanding drum cools itself during operation, eliminating the risk of overheating the work surface. The side guide has been additionally reinforced, improving parallel alignment and sanding stability across the entire working width. Precision and working efficiency The CORMAK MM3146 drum sander guarantees repeatable results thanks to its mechanical height adjustment system with a precise scale. The minimum workpiece thickness is 3.5 mm, while the maximum is 100 mm, allowing the processing of both thin panels and solid structural elements. The working width of 460 mm in a single pass (or 920 mm with double guiding) provides production flexibility, even when processing larger batches of components. Standard equipment Precision aluminum sanding drum Metal drive coupling for the sanding drum Working table 460 × 465 mm Conveyor belt 1120 × 450 mm Thickness gauge with precise scale Reinforced side guide Dust extraction port Ø62 mm Technical specifications Parameter Value Motor power S1/S6 1.5/2.2 kW, 230 V Belt speed 2800 rpm (for wood and metal) Sanding belt size 2100 × 75 mm Feed belt size 1120 × 450 mm Working table dimensions 460 × 465 mm Extraction port diameter Ø62 mm Feed speed 0–4 m/min Minimum material thickness 3.5 mm Maximum working height 100 mm Working width 460 (920) mm Reinforced feed motor 60 W Machine dimensions 880 × 540 × 1230 mm Net/gross weight 134 / 160 kg Hodpfsw Hb Atjx Ab Tet

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P 400V Drum Roller Sander is an advanced through-feed sanding machine designed for precise sanding of solid wood, MDF boards, veneer, and other woodworking materials. Equipped with two sanding drums and a 635 mm working width, this model is an excellent solution for serial production and facilities requiring high-quality surface finishing. Main advantages of the machine Two sanding drums with a diameter of 150 mm ensure uniform sanding without the risk of burns or scratches. Conveyor belt system provides smooth transport of the workpiece and stable guidance under the sanding unit. Adjustable feed speed from 1.8–7.3 m/min allows the operator to adapt the working speed to the type of processed material. Dust extraction system with two Ø100 mm ports ensures efficient removal of chips and dust, improving working comfort and extending the service life of components. Solid industrial construction weighing 220 kg provides excellent stability even during intensive operation. Construction and technology The CORMAK MM3166P has been designed with stability, precision, and durability in mind. The main steel frame provides resistance to vibration and deformation. The 2.2 kW main motor drives the sanding rollers at 1800 rpm, enabling efficient removal of excess material, even when processing hard wood species. The 120 W feed motor works together with the adjustable speed control system, allowing the operator to precisely control the sanding process. The large belt width of 635 mm makes it possible to process wide components in a single pass, reducing operating time. Precision and working efficiency The machine provides accurate control of the workpiece thickness in the range of 7 to 130 mm. The sanding belt speed of 14 m/s ensures a high-quality surface finish without overheating or burning the material. The roller diameter and working roller length (635 mm) provide even contact pressure and a consistent final sanding effect. Applications The CORMAK MM3166P drum roller sander is widely used in: woodworking plants producing stairs, doors, and furniture fronts, factories manufacturing wooden components and panel materials, workshops specializing in wood and veneer restoration, solid wood and veneered furniture production facilities, production of large-area components where repeatability and sanding quality are essential. Standard equipment Two sanding rollers Ø150 mm Conveyor belt with a width of 635 mm Main motor 2.2 kW Feed motor 120 W Dust extraction system with Ø100 mm ports Adjustable table height control Optional equipment Sanding belts with different grit sizes Dust and chip extraction system Mobile base Technical specifications Parameter Value Belt length 800 mm Belt width 635 mm Radius [R] 120 Maximum material thickness 130 mm Main motor power 2.2 kW Hodpfxoxfhh Dj Ab Tjt Voltage 400 V Frequency 50 Hz Speed 1800 rpm Feed motor power 120 W Feed speed 1.8–7.3 m/min Dust extraction port diameter 100 mm Weight (net/gross) 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Roller length 635 mm

Condition: new, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Hodpfxevugf Ro Ab Tet Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, total width: 1,650 mm, total length: 600 mm, total height: 2,200 mm, overall weight: 295 kg, grinding wheel width: 75 mm, grinding wheel diameter: 300 mm, power: 4.4 kW (5.98 HP), grinding width: 50 mm, Exhibition machine: ACETI ART.70 Hedpoi Hp Nrofx Ab Tet Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 The machine is in our test room in Kobenz. Machine is new and has not run! GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm - Circumferential speed: 22 - 44 m/sec Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter)

Condition: good (used), Polishing bench, grinding machine, polishing bench, double grinding bench, double grinding machine, pedestal grinding machine, pedestal grinding bench -Drive: 2.2 kW -Speed: 1420 rpm -Assembled brush: 150 mm Hjdpfx Absd D R Sxs Tst -Dimensions: 700/800/H1300 mm -Weight: 73 kg

Condition: ready for operation (used), Indumasch Siegen 362 Grinding Pedestal Belt Grinding Machine Grinder -Belt width: 150 mm -Speed: 1400 / 2800 rpm Hodpfxjyyn A Hj Ab Tot 220V / 380V -Extraction unit You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are reserved.

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 800 - 320 mm grinding depth: 380 mm dimensions of grinding wheel: Ø 65 x 25mm (Topfscheibe) mm feed:: 0,05 - 0,40 U/min / 8 step U/min total power requirement: ca. 1,1 kW Hodpfxeu Ngaus Ab Tst weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection Hsdjdzqn Dopfx Ab Tot - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: used, Double-sided grinding and polishing machine, MEYER, type SMP Machine no. 848, year of manufacture 1963 Grinding and polishing disc diameter, max. 800 mm Shaft diameter 50 mm Grinding disc mounting, Ø 305 mm Disc spacing 1470 mm Working height 550 mm Speed 710 / 800 / 950 rpm Drive power 2 x 3 kW Mains connection 380 volts, 50 Hz - Two drive motors, one for each working side - Star-delta switch for each drive motor - Speed change by switching the drive belts - Dust extraction flange, Ø 100 mm - Two corundum grinding discs, 40 mm wide, approx. Ø 560 / 480 mm, are installed Space requirement L x W x H 1700 x 1200 x 900 mm Weight 850 kg Hodpjdzqmhofx Ab Tot Good condition

Condition: ready for operation (used), Grinding and polishing machine of a shoemaker company . Hjdjvb Uqhepfx Ab Tjt Manufacturer Hess SB- Automatenbau , Model 802 / 114

Year of construction: 2025, condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard - disc cover - connections for cooling water & water drain Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request offer not binding - subject to prior sale Hsdpfx Abjptc Do Tjt

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW - speed 1420 U/min - working hight is 600 mm Hjdpjdz Uzbofx Ab Tjt - conical shaft

Condition: good (used), Year of construction: 2001, The system can also grind miters. Connection value: 20.5kW Total length: 12500mm Hedpfjiqghzex Ab Tst

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Hjdexxaitspfx Ab Tjt

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. Hedpfxjwxrnwj Ab Tet The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing * DC injection breaking unit fitted. *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Hedpfx Aoq I Nw Ijb Tet

Condition: ready for operation (used), functionality: fully functional, grinding wheel diameter: 355 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 750 mm, travel distance Z-axis: 340 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel range, X-axis: 750 mm Travel range, Z-axis: 340 mm Table width: 600 mm Table depth: 300 mm Magnet width: 600 mm Magnet depth: 300 mm Max. grinding wheel diameter: 355 mm Max. spindle speed: 1,500 rpm Hedpezuw Dmofx Ab Tot MACHINE DETAILS Drive system: CNC Control system: Fanuc DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 2,300 x 2,400 mm Net weight: 2,500 kg Shipping packages: 3 units EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2002, overall weight: 7,000 kg, center height: 160 mm, distance between centers: 2,000 mm, controller model: Siematic Rack PC 840, positioning accuracy: 0.001 mm, Automatic reamer tool grinding machine / reaming cutter grinding machine! For grinding the chip chamber and chip face on round reaming tools. Hodpfxjzt Si Us Ab Tot TECHNICAL DETAILS Tooth length: 1,700 mm Center distance: 2,000 mm Center height: 160 mm Resolution X-axis: 0.001 mm Resolution Y-axis: 0.001 mm Resolution Z-axis: 0.001 mm Resolution W-axis: 0.001 mm MACHINE DETAILS Axis control: 4 axes Control system: Siemens Rack PC 840 Processor: Pentium 3 Program memory: 20 GB Operating system: Windows 2000 Weight: 7,000 kg EQUIPMENT Simultaneous machining via 2 handwheels

Condition: not inspected (used), machine/vehicle number: 23095, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, input voltage: 380 V, input current: 17 A, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Power supply: 3~ Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 17 A Fuses Rated current main fuse, fast-blow: 35 A Rated current main fuse, slow-blow: 25 A Hjdpfxszt Sfpe Ab Tst Dimensions & Weight Dimensions (L x W x H): 3,800 x 2,100 x 2,000 mm Machine weight: approx. 4,500 kg

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Hsdsywftkjpfx Ab Tst