Used Ducomp Brd 7,5Kw for sale (82)

Condition: new, Year of construction: 2026, total length: 1,010 mm, total width: 680 mm, total height: 1,605 mm, power: 7.5 kW (10.20 HP), fuel type: electric, pressure (min.): 6 bar, pressure (max.): 8 bar, Equipment: CE marking, DUCOMP BRD 7.5kW - Screw compressor + Air Tank + Dryer In BRD Series Compressors, the compressor and dryer are mounted on the air tank and their connections are made. It is shipped ready for operation thanks to its internal Ijdsygdk Eepfx Anwsau tank and dryer.

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), fuel tank capacity: 500 l, Piston compressor. Brand new with warranty. Capacity: 980 lt/min Pressure: 8 bar. Power: 5.5kW / 7.5 Hp Reservoir: 500 lt Warranty and after-warranty service. Isdey St I Eopfx Anwjau

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 Spiral Casing Pumps in Process Design 1 unit has been fully overhauled; bearings in both the pump and the motor are brand new. The mechanical seal has been serviced by a professional specialist. All gaskets have been replaced with new ones. Pump specifications: - Flow rate: 6 m³/h - Delivery head: 25 m - Pump speed: 1440 rpm - Shaft seal: Double-acting mechanical seal - Seal manufacturer: Burgmann HRZ 13754-00 - Seal configuration: SIC/SIC/-CAR/SIC-VITON - Impeller type: Closed two-channel impeller - Impeller diameter: 277 mm - Bearing type: Rolling bearings - Impeller side: 1x NU411 - Drive side: 2x 7311 - Lubrication (drive side): Oil - Lubricant monitoring: Oil level regulator Materials: - Pump casing: Duplex steel Noridur 1.4593 (9.4460) - Wear plate: Duplex steel Noridur 1.4593 (9.4460) - Discharge cover: Duplex steel Noridur 1.4593 (9.4460) - Shaft: Tempered steel C45+N - Impeller: Duplex steel Noridur 1.4593 (9.4460) - Bearing bracket: Cast iron EN-GJL-250 - Shaft sleeve: Duplex steel 1.4462 Connections: - Inlet flange nominal bore: DN 80 - Discharge flange nominal bore: DN 40 - Nominal pressure, inlet: PN 10 - Nominal pressure, discharge: PN 10 Coupling: Iedpfx Asiuznuonwjau - Manufacturer: Flender - Coupling type: Eupex NH with spacer sleeve Baseplate: Cast iron Electric Motor: - Manufacturer: AEG AM 132 - Efficiency class: IE 0 - Motor speed: 1476 rpm - Frequency: 50 Hz - Rated voltage: 400 V - Rated output: P2 7.50 kW - Thermal class: F - Degree of protection: IP55 - Power factor cosφ: 0.82 Dimensions: - Length: 1270 mm - Width: 550 mm - Height: 570 mm - Weight: 300 kg Properties of material 1.4593 Noridur: Excellent for use in: - Chemical and process industries - Sulphuric and phosphoric acid applications - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-laden wash suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Condition: ready for operation (used), IMA Omlat electrospindle 7.5kW 305/308V~ with constant power from 12,000 to 24,000 rpm, Art./Material No.: 140084, Drawing 06058, used, good condition, 100% functional, scope of delivery as per photos. Isdpjzahxasfx Anweau

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. Iajdpfx Answr Ul Sswsu manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2008, condition: excellent (used), Elektromotor 7,5 Kw 1445 Ford Leroy Somer LS132MT mehr zu verkaufen Seriennummer: ctm: 165 Iaedpfx Anehr Uw Sswju Leistung: 7,5 kW Drehzahl: 1445,-/min 400 V 50 Hz 15, 40 A Wellendurchmesser: 34mm doppelte Riemenscheibe Stummelschaftlänge: 90 mm Fußloch: Länge: 140mm Wind: 220mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition. Iasdpfxotx Akne Anwou

Condition: used, Pump, Wilo IPL50/175-7.5/2; 7.5 kW; Used machine Manufacturer: Wilo Type: IPL50/175-7.5/2 Overall dimensions: Width: 270 mm Depth: 380 mm Iodpfx Ansy Ezb Tswoau Height: 670 mm Electrical data: 400V; 13.6 A; 7.5 kW Maximum pressure: 10 bar Fluid temperature range: −20 °C … +120 °C Maximum flow rate: approx. 69 m³/h Maximum delivery head: approx. 38 m

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Iodpfx Ajufr H Aenwsau

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 630 mm, number of blades: 102, height adjustment type: electric, table width: 630 mm, Equipment: low noise, motor brake, For sale is a HOFMANN AD 635 jointer-thickness planer in premium industrial design. The machine features a HELIX spiral cutterhead (630 mm), a powerful 7.5 kW motor, and a thickness table positioning control. Equipment / Highlights: + HELIX cutterhead, 630 mm – 102 carbide reversible knives + Very quiet operation, reduced vibration + Excellent planed surface quality + Motor power: 7.5 kW (upgrade from standard) + Digital positioning control for the thickness table – sensor monitoring with photoelectric switch + Electronic start and braking unit + Two feed speeds: 7 / 14 m/min + Thickness table supported by 4 posts, quadruple guidance + Rubber-coated infeed and outfeed rollers + SUVAMATIC cutterhead guard + Integrated operating hours counter + Robust industrial construction Technical data: Iedsx Ir N Tepfx Anweau + Planing width: 630 mm + Cutterhead: HELIX, solid steel + Cutterhead speed: 5,800 rpm + Knives: 102 carbide reversible knives (37°) + Motor: 7.5 kW, 400 V / 50 Hz + Feed speed: 7 / 14 m/min + Extraction ports: 2 × Ø 160 mm Scope of delivery: + HOFMANN AD 635 Jointer-Thickness Planer + HELIX Spiral Cutterhead + SUVAMATIC Safety Guard + Positioning Control + Operation manual (German) HOFMANN AD 635 Jointer-Thickness Planer | HELIX | 7.5 kW | Display unit Manufacturer: HOFMANN Maschinenfabrik GmbH – Made in Germany HOFMANN AD 635, jointer-thickness planer, thickness planer, jointer, combination planer, HELIX cutterhead, spiral cutterhead, woodworking machine, joinery machine, carpentry machine, industrial planer, planer 630 mm Machine type: Joiner-thickness planer (combination machine) Model: AD 635 Year of manufacture: 2025 Condition: New / showroom machine Location: Haldensleben – Shipping available from stock

Condition: good (used), Year of construction: 1995, planing width: 630 mm, height adjustment type: electric, number of planer blades: 4, planing height: 250 mm, Equipment: motor brake, ⭐ MARTIN Thickness Planer T44 – 7.5 kW – Tersa – Digital Display – Electric Thickness Table – Top Industrial Quality ⭐ For sale is a high-quality MARTIN T44 thickness planer from German industrial production – known for its exceptional smooth running, precision, and durability. This machine is perfect for professional carpentry shops, timber construction companies, or demanding workshops looking for a reliable, heavy-duty machine. ✅ Technical Data & Features: +Manufacturer: MARTIN +Model: T44 +Planer Width: 630mm +Planer Height: 2.8 – 250 mm +Year of Construction: 1995 +Motor Power: 7.5 kW (powerful industrial motor) +Tersa cutterhead system – quick cutter changes without adjustment +Digital thickness table display for precise work +Electric thickness table adjustment +Heavy, low-vibration gray cast iron construction +Rubber-coated outfeed roller Iodpfx Anjyh I Etowsau +Central lubrication +Very clean planing result and smooth operation ️ Condition: +Well-maintained used machine from ongoing operation +Technically in perfect condition +Immediately ready for use +Normal signs of wear for its age Inspection and trial run possible by arrangement – the machine can be tested on-site. Price: €8900 net Location: 39340 Haldensleben Shipping by freight forwarder possible

Condition: excellent (used), Year of construction: 1996, I sell the ventilator OWENT OLKUSZ WTOP40 Ventilator 7,5 kW - 10 HP Total power 10.000 m3 / hr. Iaodpfewun Hhjx Anwou Possible to sell immediately

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Weight 250 kg Total power requirement 7,5 kw Iaodpfx Aevz E Dlonweu

Condition: new, Year of construction: 2025, Blast wheel rotary table installation D = 1500 mm 2 x 7, 5kW spin wheels Questions about technical specifications, etc. contact us in writing or by telephone. Iodpfodtq Anjx Anwsau Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: new, 3 waste bags capacity 8000 m3/h Iaedpfx Ajxnyltonwou motor power 7.5 kW bag shaking mechanism air return channel power supply 380V

Condition: new, For sale: Industrial electric motor, 7.5 kW, flange-mounted design. Iodpfxjyv Utkj Anwjau The motor comes from warehouse stock and has never been used. Visible storage marks and significant rust on the housing – condition as shown in the photos. Ideal for industrial applications, pumps, fans, machinery, and production equipment. Technical data: Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 380–420 V Frequency: 50 Hz Power supply: 3-phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 65 kg Flange-mounted design Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: New old stock Never used Visible rust on the housing

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 piece liquid ring vacuum pump. Please read the description carefully until the end!! The pump is not suitable for: Water, food industry, or non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are more appropriate. Attention!! The pump does not have explosion protection certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal is also not EX-certified! The pump is made from the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficiently corrosion-resistant. It is especially used where chloride-induced pitting and crevice corrosion or stress corrosion cracking could be an issue. Alloy 59 is used for: environmental technology, chemical industry (chemical processes involving oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Grade 2.4605 is predominantly used in the chemical industry, the pulp and paper industry, and in flue gas desulphurization plants. Excellent resistance to mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acid, especially to mixed sulfuric/hydrochloric acid environments. Typical applications include: - Plant components for organic chemical processes with chloride-containing media, especially when catalysts based on chlorides are used - Multipurpose installations in the chemical industry - Plant parts in the fine chemical and pharmaceutical industries - Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulphurization units (FGD) in fossil-fuel power plants and waste incineration plants - SO2 scrubbers for marine diesel engines - Components for seawater and concentrated brine applications - Equipment and components for geothermal and sour gas applications - Reactors for acetic acid and acetic anhydride - Reactors for hydrofluoric acid - Sulphuric acid coolers - Piping in geothermal power plants - Components in flue gas desulphurization units Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Iaodpfx Aeigqutonweu Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal reconditioned by specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: excellent (used), For sale: VEM electric motor in industrial version. The motor is used, in good visual condition. Visible signs of use and deposits and rust on the flange resulting from operation and storage. The motor is operational. Iedjyv Uuzopfx Anwjau Ideal for industrial applications, machinery, pumps, fans, and production lines. Technical data: Manufacturer: VEM Power: 7.5 kW Rotational speed: approx. 2880 rpm Voltage: 400/690 V Frequency: 50 Hz Supply: 3 phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 57 kg Design: IM B3 Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: Used Signs of use Visible corrosion on parts

Condition: ready for operation (used), Siemens 1HU3056-0AC01 SN: BRD57608701003 Permanent Magnet Motor, used, normal signs of use, 100% functional, scope of delivery as per photos. Isdpfx Aex Dvfzenwoau

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, Small wood chipper, manufactured in Denmark, is new. Iaodpoza U Emofx Anwou

Condition: like new (used), Compact pump unit with an LP-type pneumatic hydraulic pump. P max= 590 bar Application: Hydraulic control Width: 200 mm Height: 360 mm Depth: 255 mm Iaodsy Uh Tzspfx Anwou Weight: 12.1 kg Condition: Like new

Condition: good (used), Year of construction: 2002, operating hours: 12,260 h, machine/vehicle number: BRKNR-9011, fuel type: diesel, power: 53 kW (72.06 HP), Year of manufacture: July 2002 Model year: 2002 Iodoy Tux Ijpfx Anwjau Intended use: Construction Number of cylinders: 6 Unladen weight: 2,350 kg Generator output: 57 kVA Technical condition: good Optical condition: good EU representative: Gerrit Haverhoek, Zweedsestraat 6, 7418 BG Deventer

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm Iajdpfx Ansd N Dn Dewsu weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: used, Year of construction: 1995, used, good condition manufactured by Luftus type LRM - WTS built in 1995 Masch.-No. 950071 for chips low speed ca. 1400 rpm motor 7,5 kW connection diameter 300 mm pressing pa. 2000 m³/h air capacity 6000 m³/h steel wheel required space ca. 1200 x 800 x 1200 mm Iodpfx Aevwfbpenwoau weight ca. 250 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 2000, used, top condition, low hours Make: Schuko Model: TSK 250 CE Year of manufacture: 2000 Machine no.: Motor: 7.5 kW Connection diameter: 250 mm Pressure approx. 2725 m³/h Air flow rate: 4595 m³/h Steel impeller Belt drive Vibration dampers Isdpfxjycxh Ro Anwjau Space requirement approx. 1300 x 700 x 1300 mm Weight approx. 200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-inspected condition, without warranty or guarantee.