Used Dunkes Hydraulic Dunkes Press Hdz 160 for sale (29,650)

Year of construction: 2016, condition: reconditioned (used), Machine name:Dunkes drawing press Type:HDZ 160 Ncodpfjpl T Rwsx Abzsw Year of manufacture:1988 Year of reconstruction:2016 Electrical drawing:16001E1 Operating voltage:3AC 400V Frequency:50Hz Rated current:100A Control voltage:24 VDC

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Ncedpfxewndnue Abzew Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: good (used), functionality: fully functional, pressing force: 160 t, table width: 1,250 mm, throat depth: 500 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Nedpfsy U Dtdex Abzjcw Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools .

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Ncedpfxoy Tptaj Abzew Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed Ncjdpewp Nv Hofx Abzsw 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Nedpfx Aboqy E I Rjzecw

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,300 mm, total height: 2,500 mm, total width: 1,650 mm, overall weight: 9,600 kg, product height (max.): 455 mm, feed force X-axis: 600 N, feed length X-axis: 180 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, # Hydraulic CNC Servo Press Brake MTP 160x3200 The Hydraulic CNC Servo Press Brake MTP 160x3200 is a modern machine designed for precise bending of mild steel, stainless steel, and aluminum sheets. With a pressing force of 160 tons and a bending length of 3200 mm, it is suitable for both serial production and custom fabrication. The machine is equipped with the MTP-3212 CNC controller and 4 CNC-controlled axes (Y1, Y2, X, R), ensuring high accuracy, repeatability, and fast positioning. The intuitive controller with a large color touchscreen allows easy programming, automatic bending calculations, and storage of programs and tooling data. Nodozcmrdjpfx Abzscw The press brake incorporates high-quality components from leading manufacturers, including a Rexroth hydraulic system, Schneider Electric components, and Omron safety devices. Steel hydraulic connections improve reliability and minimize the risk of leaks. For operator convenience, the machine features a mobile control panel, two front support arms, and LED working area illumination. Safety is ensured by a light curtain, side guards, rear safety protection, and easily accessible emergency stop switches. The machine is supplied with a CE Declaration of Conformity and an English user manual. ## Technical Specifications * Pressing force: 160 T * Maximum bending length: 3200 mm * Maximum sheet thickness: up to 8 mm * Control system: MTP-3212 CNC * Number of CNC axes: 4 (Y1, Y2, X, R) * Distance between side frames: 2600 mm * Throat depth: 320 mm * Ram stroke: 180 mm * Maximum opening height: 455 mm * Back gauge travel (X-axis): 600 mm * Tool clamping system: AMADA quick clamping * Motor power: 11 kW * Power supply: 400 V / 50 Hz * Dimensions (L × W × H): 3300 × 1650 × 2500 mm * Weight: 9600 kg ## Additional Information * Professional technical support included * Assistance with tooling selection and bending parameters * CE Declaration of Conformity included * English user manual supplied * Spare parts support during and after the warranty period * Possibility to extend the warranty beyond the standard warranty period The machine is sold on an EXW basis. Transportation can be arranged upon request and quoted separately depending on the delivery destination. Our team will be pleased to provide a competitive transport quotation to any location within Europe and worldwide. For more information about our company, machines, and services, please visit our website. Metal Technics Polska is a trusted supplier of industrial machinery, offering professional sales support, technical assistance, spare parts availability, and after-sales service for customers throughout Europe.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WE OFFER AN BEAUTIFULL CONDITION DEEP DRAWN PRESS 160 TON WITH BACK FORCE BOTTOM 70 TON MACHINE WAS BUILD ON ORDER MACHINE WAS USED ONLY A COUPLE TIMES PER YEAR FOR SOME SMALL PARTS. CONDITION IS EXCELLENT . NEWER RUN A PRODUCTION. Nodpfx Ajvxbn Uebzjcw WE CAN ALSO DELIVER MACHINE FOR A CUSTOMER TABLE SIZE: 1030 X 630 OPEN GAP: 740 MM TOTAL WEIGHT APPROX 8000KG DIMENSION 1500 X 1500 X 4000

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, WE OFFER AN VERY NICE DUNKES PRESS Nedovldx Nepfx Abzecw MACHINE IS READY FOR OPERATION.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t Ncedpfx Aotndu Uobzew LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Nodecmat Ujpfx Abzjcw the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Ncsdpfxju Axfcj Abzow Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Nodpszlaitjfx Abzscw Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press Nedpfozdaxyjx Abzjcw This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Year of construction: 2008, operating hours: 2,008 h, condition: ready for operation (used), overall weight: 15,000 kg, This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained. Njdpfx Ajyzf A Tjbzjcw Machine Benefits Qualitative Machine Benefits • The machine is in good condition and fully functional

Condition: good (used), Year of construction: 1994, functionality: fully functional, operating hours: 25,000 h, pressing force: 400 t, table width: 1,250 mm, table length: 1,240 mm, table height: 1,125 mm, oil tank capacity: 3,400 l, total width: 3,500 mm, total height: 4,600 mm, installation height: 600 mm, Further images and technical data can be provided by email upon request. Sale is ex-location without warranty and return. Dismantling and collection must be carried out by the buyer. The press is standing at ground level without a base. We deliver the press media-free. The digital hours counter is no longer accurate. The manual counter shows approximately 25,000 hours. Ncsdjvb D Trjpfx Abzsw

Condition: used, Year of construction: 1999, Amada Promecam HFB 2204 8-Axis Hydraulic Press Brake (1999), Capacity 2200kN, 4000mm Bed, Maximum Stroke 180mm, Stopping Time 80ms, Stopping Distance 9mm, Machine Weight 16000kg. S/No. HFBO 220 40 H990103 (1999). Country of Origin: France Ncodpfszn Urzsx Abzew Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Please Note: This lot is located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Ncsdpfjxhc Spsx Abzjw Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 Nodpfx Abjzn Afvozocw BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Condition: excellent (used), Year of construction: 1993, AMADA MODEL ITS2 50-20 50 TONS X 2000 HYDRAULIC UP STROKING 5 AXIS CNC PRESS BRAKE COMPLETE WITH OPERATEUR 1 4 AXIS CNC CONTROL Erwin Sick machine mounted electronic guards , side and rear interlocked fencing year 1993 description TYPE HYDRAULIC UPSTROKING BENDING PRESSURE 50 TONS BENDING LENGTH 2000 OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS X1-X YI-Y2 RI-R2 BACKGUAGE Nsdpopygydjfx Abzecw can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2001, year 2001 price POA stock no. 01859 specification 7 AXIS CNC 80 TONS X 2500 HYDRAULIC DOWNSTROKING PRESS BRAKE HIGH SPEED LONG STROKE MODELSTOCK NO 02029 description TYPE HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 80 TONS CONTROL OP 2000 NO OF AXIS SEVEN BENDING LENGTH 2500mm OPEN HEIGHT 620 STROKE LENGTH 350 THROAT DEPTH 420 MOTOR SIZE15 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK SIDE INTERLOCKED FENCING REAR INTERLOCKED SERIAL NUMBER V011137 MAX APPROACH SPEED 200 MAX BEND SPEED 20 MAX RETURN SPEED 200 Ncjdpjzbqn Hefx Abzsw

Condition: excellent (used), Year of construction: 2004, specification 150 TONS X 4000 4 AXIS CNC HYDRAULIC DOWN STROKING PRESS BRAKE COMPLETE WITH FULL LENGTH TOP AND BOTTOM TOOLING INCLUDING A BOTTOM MULTI VEE BLOCK description TYPE HYDRAULIC DOWNSTROKING BENDING LENGTH 4000 BENDING PRESSURE 150 TONS CONTROL CYBELEC DNC 60 NO OF AXIS 4 AXIS CONFIGURATION X1 Y1 R MAX SPEED 80mm/SEC STROKE 180 mm GUARDS MACHINE MOUNTED ELECTRONIC GUARDS SIDE AND REAR INTERLOCKED FENCING WEIGHT 11200 KG SERIAL NO. 6150/11324 Nsdpfx Aoh N Dqrsbzocw MOTOR SIZE 7.5 KW YEAR OF MAUFACTURER 2004

Condition: excellent (used), Year of construction: 1998, Model Amada APX 8025 8 Axis CNC Hydraulic down stroking Press Brake with Operateur II 7 axis CNC control Erwin sick machine mounted light screen guarding system year 1998 stock no. 01834 specification 80 TONS CAPACITY X 2500 7 AXIS CNC CONTROL HYDRAULIC UPSTROKING PRESS BRAKE description TYPE HYDRAULIC UPSTROKING CONTROL OPERATEUR 2 BENDING PRESSURE 80 TONS BENDING LENGTH 2500 Nedpfxowybcyo Abzocw OPEN HEIGHT 370 STROKE LENGTH 100 THROAT DEPTH 400 TABLE WIDTH 60 NO. OF AXIS 7 AXIS CONFIGURATIONS 1-X YI-Y2 RI-R2 Z1-Z2 GUARDS ELECTRONIC SIDE FENCING REAR INTERLOCKED MACHINE HEIGHT 2300 MOTOR POWER 7.5 KW

Condition: excellent (used), Year of construction: 2007, AMADA MODEL HFT 103 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, FEISSLER machine mounted electronic laser guards , side and rear interlocked fencing Model Amada HFT 100/3 downstroke CNC Press brake Year 2007 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Motor Power 7.5kw Weight 7300 kg Bed Length 3000 mm Bed Width 180 mm Throat Depth 420 mm CNC Control Nsdpfx Abszbql Sszscw 12000 hours BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm Nsdpfx Aexcblwobzjcw total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m