Used Eberhard Bauer Gear Motor / Bevel Geared Motor for sale (27,247)

Condition: like new (used), 2 Pcs. “Bauer CFG13-121/D6A4” for Sale Manufacturer: Eberhard Bauer Type: CFG13-121/D6A4 Power: 18,5 kW Voltage: 380 V Amperage: 39 A Hertz: 50 Hz RPM in/out: 1.460 / 33 Lodpjg Stt Aofx Am Neaa Shaft ø out: 95 mm (Hollow)

Condition: ready for operation (used), Bauer BG06-31/D05LA4-ST engine / engine no. z 11033154-1 A/189D1926, used, minor signs of wear, 100% functional, scope of delivery as per photos Laodpfx Ajqp Agujm Nea

Condition: ready for operation (used), Bauer BS06-61U/DHE07LA4/ST/SP Motor / Motor No. z 11459734-1 A/ 189F4736, used, good condition, 100% functional, scope of delivery as per photos Laodpfx Amoqp Agxe Nsa

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Lasdpfx Amoruakgo Nsa Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective Laedpfovr Hf Eex Am Noa testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm Laodpjxaqa Sefx Am Nea MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Laodpfx Amjrtrzds Nja Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Ljdpfx Amsxdfazo Njaa Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Laodpfx Amjxdfa Ue Nja Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Laedortrykopfx Am Nja Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Ametek, geared motor -Transmission: with toothed belt pulley -Speed: rpm -Engine: Ametek 18323 6330620005 Lajdpfey Ecryox Am Nja -Voltage: 220/240V -Dimensions: 125/85/H160 mm -Weight: 1.7 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor Ledpfxsy D Hups Am Njaa -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 135 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 340/310/H215 mm -Weight: 22.7 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 136 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 320/290/H205 mm -Weight: 20 kg Lasdpst E D Exefx Am Nsa

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation Laedpfxsyh Rmmj Am Nea

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m Lajdpoukitxjfx Am Nsa

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 1:10 -Speed: 143 rpm -Engine: Type Y2-90S-4 Lasdpjy Ai T Eefx Am Noa -Power: 1.1 kW -Protection rating: IP54 -Shaft: Ø 28 x 110 mm -Dimensions: 440/220/H260 mm -Weight: 24 kg

Condition: good (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 -Speed: 9 rpm -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg Lajdpfx Aoy Ai N Hsm Nja

Condition: ready for operation (used), Offered are 4 used geared motors. Fully functional. SEW Eurodrive gear units. Laedpfx Asy At Erjm Nja

Condition: refurbished (used), Overhauled 3-stage bevel-helical gearbox FLENDER, Model: KZA 360, P = 194 kW, n1 = 1,500 rpm, n2 = 60 rpm Ledpfx Asyhngtom Neaa

Condition: like new (used), functionality: fully functional, nominal power: 5.5 kW (7.48 HP), Bevel gear shaft-mounted geared motor Model: KUA70A 3B 132S-04E-TH Hollow shaft diameter: 45 mm Ljdeyrckhopfx Am Njaa 5.5 kW electric motor For further data, see the nameplates

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, geared motor -Type: Z10-M1C4 -Speed: 101 rpm -Power: 0.37 kW -Protection rating: IP54 Lsdpfxjyz Sglo Am Nsaa -Shaft: Ø 16 x 30 mm -Design: B6 -Dimensions: 335/185/H160 mm -Weight: 12.7 kg

Condition: used, Year of construction: 1994, Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 Laedpfx Asyz Sbpsm Nja -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Condition: good (used), Year of construction: 1994, Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm Lasdpfeyz R Uhjx Am Noa -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, variable speed geared motor Lsdjwl Uxlspfx Am Njaa -Handover: in its current condition as inspected -Condition: Functional, without brakes -Manufacturer: Nord, adjustable geared motor -Type: SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection rating: IP54 -Shaft: Ø 45 x 90 mm -Brake: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Lenze, adjustable geared motor with brake Laedjttimbjpfx Am Noa -Adjustment gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Motor: Type B7KB4-044H 0.25 kW / 1390 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Number: 3x geared motors available -Price: per piece -Dimensions: 410/280/H200 mm -Weight: 16.7 kg/pc.