Used Edge Banding Machine For Narrow Parts, Pur for sale (76,202)

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Fgsdpey Rlbnsfx Afueh Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters for straight edges for angled edges Fedpfxszvmygs Afuegh particularly suitable for edge banding of shaped parts READY FOR OPERATION

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Fgodpeycvcxefx Afueh

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 2230832-269, Barbaric RTS 02 Professional reverse transfer system with destacking, year of manufacture 2023. Workpiece recirculation with 0 - 90 - 180 degree rotation, part measurement, destacking function including stack construction and manual mode for oversized panels. Composed of a removal station RX U4 B2200, conveyor belt L9000 B800, delivery station Comfort, movable table, dual function, steplessly adjustable conveyor belt, support rollers with double track, portal RTS 6100, safety fences and 2 safety light curtains. Largest part 2800 x 1300 mm, smallest 300 x 80 mm, maximum 60 kg. Pick-up with suction cups, up to 12 cycles per minute, transfer speed up to 120 m/min, stacking height 800 mm. Connection 400 V / 50 Hz, 20 A and compressed air 0.6 MPa. Fgedpfxoz Ngg Ej Afush

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Fgodpez Ekkxofx Afueh Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: excellent (used), Wegoma edge banding machine with infeed/outfeed roller table and accessories. Hardly used. Fsdpfez Hvz Sex Afuegh

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes Fjdpoz En Axofx Afuegh End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2013, functionality: fully functional, operating hours: 334 h, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,600 mm, total length: 6,600 mm, total width: 1,250 mm, overall weight: 2,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We are offering this used OTT TORNADO-TOP edge banding machine, manufactured in 2013. The machine is in very good condition and was rarely used. It was only used to process PUR adhesive for custom-made products and individual pieces of furniture. No serial production. Fjdpfszvqclox Afuogh Type: TORNADO-TOP Year of manufacture: 2013 Power supply: 3~ N+PE Frequency: 50 Hz Rated voltage: 3×400 VAC Rated current: 31 A Rated power: 17.5 kW cos φ: Control voltage: 24 VDC Maximum fuse rating: 35 A Cable cross-section: 5×6 mm² If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, Fgjdpfxeu R S Nwj Afueh motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Fsdpfx Aonwkbcsfuogh Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: excellent (used), The HEBROCK K36 Airtronic is a used edge banding machine with PC control, a touchscreen, and a pivoting control panel. The zero-joint Airtronic system is complemented by extensive equipment for joining, edge banding, capping, milling, and trimming. Control and Workpiece Guidance: The machine has a program memory and automatic pressure beam adjustment. The feed is controlled by a conveyor chain, and the infeed guide is adjustable by motor. An extendable workpiece support assists with workpiece guidance. The feed speed ranges from 7 to 10 m/min. Workpieces with a thickness of 8 to 60 mm and a minimum length of 200 mm can be processed. Fgodpoymyp Refx Afuoh Edge Processing and Glue Application: A diamond joining cutter operates in both forward and reverse directions and has a power of 2 x 2.2 kW. For glue application, there is a quick-heating tank, a changing device for glue tanks, and interchangeable glue applicators. The use of PUR adhesives is possible. For roll material, an edge thickness of 0.5 to 3 mm is specified. The support plate for the edge material has a diameter of 850 mm. Post-Processing Units: The trimming saw is equipped with an HF motor. This is followed by a flush-cutting unit and a flush, radius, and bevel cutting unit with pneumatic adjustment. A multi-tool and a multi-radius trimming blade are also included. For trimming blade processing, a flat trimming blade and air nozzles on the radius and flat trimming blade are available. The chip collection box is assigned to the radius trimming blade. A changing motor is available for corner copying; the maximum edge thickness for this is 3 mm. Additional Equipment: The machine has spray devices for release agents, cleaning agents, antistatic coolant, and lubricants. LED lighting is installed in the machine area. The total length is 5,540 mm. With dimensions of 5,540 x 1,210 x 1,450 mm, the machine weighs 1,700 kg. The compressed air connection is specified as 7 bar. Condition: The HEBROCK K36 Airtronic is offered as a used machine. Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues Fgjdpfx Afoz Ikq Djuoh - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg Fgsdpfx Aevwgizefueh total connected load 5.2 kW Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 23 m/min, total height: 1,500 mm, total length: 3,200 mm, total width: 1,200 mm, overall weight: 1,200 kg, We offer this edge banding machine for shaped components, VITAP ECLIPSE 2.0, in very good condition, manufactured in 2021. Rated voltage: 400 V Frequency: 50 Hz Rated power: 9 kW Air pressure: 6 bar Weight: 1200 kg Dimensions (L × W × H): 3200 × 1200 × 1500 mm Thickness of workpieces: 8–60 mm Fedpfxozuwdgj Afuegh Feed rate: 9–23 m/min Glue tank capacity: 9 kg Edge banding machine VITAP ECLIPSE 2.0 Device type: FD 21 pro Device number: 120019 P Year of manufacture: 2021 Used device, in very good technical condition, used for one project, used sporadically for over a year, hence the decision to sell. We are interested in selling or exchanging it for a panel saw with a cutting width of 4300 mm (with a price adjustment, of course). Due to the project closure, we are offering for sale: Multi-spindle drilling machine FELDER FD 21 Panel saw HOLZMA OPTIMAT HPP 350 Edge banding machine VITAP ECLIPSE 2.0 The device is connected, fully functional, and can be viewed/tested on-site – Kraków, Rybitwy. The device is designed for edge banding narrow side surfaces of furniture components made of particleboard, plywood, and lumber. The VITAP edge banding machine is ideally suited for edge banding from 1-3 mm. Type: Edge banding - Single-sided edge banding machine Component thickness: 3 mm Edge thickness: 60 mm If you have any questions or need additional information, please send a message or contact us by phone.

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Fodpoz Ea Dzofx Afuegh Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Fsdpfozb Aicox Afujgh Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Fgjdpsw Dm Hrofx Afueh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Fgedpfxewlbxle Afuoh Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Fjdpoythxmjfx Afujgh Available immediately.

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Fedpfx Aszyy Avjfusgh Equipment and technical data:

Condition: like new (used), functionality: fully functional, Used professional deburring machine Used, professional, and robust deburring machine for the efficient removal of burrs and rounding of edges on metal parts. Suitable for use in workshops and industrial production environments. The machine is equipped with 3 brushes and a powerful 2.2 kW motor. Thanks to its solid construction and weight of approximately 410 kg, the machine is suitable for professional and continuous use. Technical specifications: Max. material dimensions: 120 × 120 mm Fgedpfx Afjz Ek Evjujh Brush diameter: 250 mm Number of brushes: 3 Motor power: 2.2 kW Voltage: 400 V Speed: 1,380 / 2,840 rpm Weight: approx. 410 kg Condition: Used Available immediately. Inspection and testing of the machine are possible by appointment.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, ASSEMBLY UNIT PROGRAMMABLE ASSEMBLY FENCE 0-5MM AUTOMATIC MAGAZINE FOR EDGE BANDING ROLLS AUTOMATIC MAGAZINE FOR SOLID EDGES CUT-OFF KNIFE FOR EDGE BANDING ROLLS PROGRAMMABLE PRESSURE ZONE WITH 1 PRE-PRESSURE AND 5 POST-PRESSURE ROLLERS GLUING UNIT, FLUSHABLE FOR PU ADHESIVE LINEAR CUTTING UNIT, SWIVELABLE FLUSH MILLING UNIT 2X1.9 KW RADIUS MILLING UNIT RADIUS SCRAPER COPY MILLING UNIT WITH 2 MOTORS SURFACE SCRAPERS TOUCHSCREEN CONTROL PANEL EDGE THICKNESS UP TO 20MM Fodpov I Saysfx Afusgh MACHINE LENGTH 7.90 M

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm Fodpfx Afszcpixoujgh OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: excellent (used), Gluing machine Guillotine cross-cut saws Fjdpfxsttu Rie Afujgh milling cutter Scraper Polishing machine

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine SCM K130, year 2009. Configuration: Fodpfxst Ir Tps Afujgh Edge banding EVA glue End cutting saws pneumatic adjustable 0-15° Tilting radius milling pneumatic controllable Free space for further aggregates Very good condition, fully working. Including CE and full documentation.