Used Edgeracer Er 1500 D for sale (64,514)

Condition: new, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Hfjdsucw Rbspfx Aaisk The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: new, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, An all-in-one machine: removing slag, burrs, and oxides Reliable and clean removal of slag using slag hammer brushes EdgeRacer the Grinder effortlessly removes the slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted so that they almost touch the underside. The steel bristles then knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder effortlessly removes stubborn stamping burrs and laser beads/splatter. By adjusting the brush feed, you also determine the edge rounding performance. Deburring and edge rounding of thin sheet metal and 3D workpieces Deburr thin sheets or sheets with cut-outs. The grinding brushes can be extended beyond the transport level, so that the entire workpiece edge is processed. The oxide disc can be used to remove oxide layers on internal and external contours. Full working width or double performance – optimally adapted to your needs Hedswzybkepfx Aaisfk Depending on the width of the parts to be processed, you can choose between two processing modes. Select single-row processing to fully utilize the working width, whether for wide parts or for parallel feeding. To optimize tool wear, the brushes automatically change their position. For narrower workpieces, choose the double-row processing. This achieves double the processing in a single pass.

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Hfodpfxoucw Dzs Aaisk

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner Hjdpfx Ashzw Hisaiofk 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A Hodpfeyga Utsx Aaisfk • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Hodevpp S Nopfx Aaisfk Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, Year of construction: 2026, RPS-1500 The RPS-1500 self-contained sand-and-salt spreader from TISAV is the ideal piece of equipment for the effective spreading of de-icing materials on roads and pavements, minimising the need for manual labour and significantly reducing the risk of accidents and personal injury. The spreader is fitted with a 1.5 m³ hopper featuring a scraper-chain feed mechanism and a disc for spreading materials. Thanks to its self-contained design and compact dimensions, it can be used with any vehicle. SPECIFICATIONS: • Spreading width, depending on disc speed – 3–6 m • Hydraulically driven mechanisms • Disc tilt adjustment (manual) • Mixture feed mechanism – scraper-chain • Proportional control system for disc rotation speed via the control unit in the driver’s cab (optional) Hfjdpfx Ajt Ifxleaisk • Equipment controlled via a control panel from the driver’s cab. • Features its own wheelbase, or can be mounted on the customer’s vehicle.

Condition: new, functionality: fully functional, color: orange, brakes: other, gearing type: mechanical, emission class: none, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, fog lights, hydraulics, low noise, onboard computer, traction control, TICAB Sand & Salt Spreader RPS 1500 | 1.5 m³ – Professional Winter Road Maintenance & De icing Equipment Hfedjx Uql Hjpfx Aaiek Featuring a 1.5 m³ hopper, hydraulic drive and efficient brush chain feed, this spreader delivers uniform distribution of salt, sand, grit, and other anti skid materials, helping municipalities, contractors and road services maintain safe roads, sidewalks and pavements throughout the cold season. The TICAB RPS 1500 is a high performance sand and salt spreader engineered for winter road maintenance, snow and ice control, anti icing, de icing, and surface safety operations. Key Features • Hopper capacity: 1.5 m³ for extended operation without frequent refills • Hydraulic scraper chain feeding system for reliable material delivery • Spreading width: 3–6 m (varies with disc speed) for broad winter coverage • Disc spreader with adjustable tilt for optimized salt and sand dispersion • In cab control panel with optional proportional disc speed control • Can be mounted on a trailer or customer truck chassis for versatile use Applications • Winter road de icing & anti icing spreading • Municipal street, highway & urban pavement treatment • Sidewalks, parking lots & industrial surface maintenance • Sand, salt & grit spreading for traffic safety Why Choose TICAB RPS 1500 It’s a cost effective choice for municipalities, winter service contractors, and road maintenance fleets. The TICAB RPS 1500 delivers compact design, high efficiency, and reliable performance — reducing manual labor, improving safety, and increasing productivity during winter road service, de icing, and anti skid applications Contact us for price, delivery options, and full technical specifications. Get ready for safe winter roads with TICAB!

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 11.481 kg Functional Generator capacity: 1.500 kVA Dimensions of cargo space: 667 x 245 x 279 cm CE mark: yes Other information Fuel consumption: 232.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Hsdpfsx Dqnkjx Aaiofk RATING TYPE STANDBY: Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm Hfsdpfx Aszlfmkjaiek - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Weight 1500 kg Hfodpevz Hbfsfx Aaijk Total power requirement 2,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Weight 1500 kg Hfedpevz E Eisfx Aaisk Total power requirement 2,5 kw

Condition: used, Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm Hsdpeu S Tc Esfx Aaisfk -Weight: 8.3 kg

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Hfedpfxoym Ih Uj Aaiek

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Hfsdpeyab R Nsfx Aaiek Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013)

Condition: ready for operation (used), Unipo UCP 1500 operator terminal 2RIT0XFC9309, used, minor signs of wear, 100% functional Hodpfxoxaidvo Aaisfk

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LP20250813JWL-1, type of input current: AC, total height: 900 mm, total width: 730 mm, total length: 980 mm, input voltage: 220 V, overall weight: 190 kg, type of cooling: water, sheet thickness aluminum (max.): 3 mm, laser power: 1,500 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, compressed air connection: 15 bar, Equipment: type plate available, This brand-new 2025 handheld fiber laser welding machine is offered in unused condition with 0 working hours and is ready for immediate operation. Designed for high-speed, high-precision welding, it delivers clean, strong welds with minimal heat distortion and excellent finishing quality. Compared to traditional MIG/TIG welding, this laser welding system offers significantly faster production speeds, reduced post-processing, lower consumable costs, and easier operation. The machine is compact, user-friendly, and suitable for both experienced operators and first-time users. Machine Condition: Year of manufacture: 2025 Condition: Brand new / unused Working hours: 0 hours Location: Portugal Availability: Immediate delivery Documentation included Technical Specifications: Hfsdpfjyztpbox Aaiok Laser power: 1500W Laser type: Fiber laser Welding mode: Handheld Cooling system: Industrial water cooling Power supply: 220V Wavelength: 1070 nm Welding thickness: up to 4 mm (depending on material) Operation mode: Continuous / Pulse (depending on configuration) Welding speed: up to 4x faster than conventional TIG welding Suitable Materials: Stainless steel Carbon steel Aluminum Galvanized steel Advantages: High welding precision Minimal thermal deformation Clean weld seams with little or no finishing required Low maintenance High production efficiency Ideal for industrial fabrication, metal furniture, automotive, and sheet metal applications Videos, additional photos, and live demonstration available upon request.

Condition: like new (used), The Karl Schnell Paddle Mixer with a capacity of 1500 liters is a high-performance industrial meat processing machine designed for large-scale production facilities. Built for efficiency, reliability, and consistent mixing results, this powerful unit ensures uniform blending of meat, spices, and other ingredients. With overall dimensions of 260 x 215 x 230 cm, it is engineered for heavy-duty industrial use while maintaining operational stability and safety. The machine is constructed entirely from stainless steel, guaranteeing maximum durability, corrosion resistance, and compliance with strict hygiene standards required in the food industry. Its robust paddle mixing system enables thorough and homogeneous mixing while preserving product texture and quality. The design allows easy cleaning and maintenance, making it suitable for continuous professional use in meat processing plants. Key Features: Brand: Karl Schnell Hodpfox Ax A Hox Aaiofk Capacity: 1500 liters Heavy-duty industrial paddle mixing system Fully constructed from stainless steel Designed for large-scale meat processing Dimensions: 260 x 215 x 230 cm

Condition: used, maximum load weight: 1,540 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 04/2021, Year of construction: 2021, Equipment: ABS, Manufacturer Tysse Model Nomek Minislamsuger / 1500 L Rustfri tank Trailer Year 2021 Condition Good Serial Number YYB6357D0M0303493 Hfodpfjx Nufajx Aaiok Ref. nr. 8062 Reg. date: 21-04-2021 Wheelbase: 2590 mm Total weight: 2500 Kg Net weight: 960 Kg Load capacity 1540 Kg Manufacturer: Nomek Tank capacity: 1500 L Pump motor: Honda GX390 Gasoline Vacuum pump: JUROP PN33 Vacuum capacity: 3.600 liters/min

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Hedpfou Tp N Dsx Aaisfk Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 760 mm, total width: 330 mm, total length: 540 mm, overall weight: 55 kg, product height (max.): 4 mm, laser power: 1,500 W, Intelligent welding process support Give your welding process additional drive with intelligent functions. The Bodor Welding Process Database incorporates welding parameters for steel from 1 to 4 mm in terms of flat welds and fillet welds. Working as a beginner’s guide, it allows users with different levels of expertise to weld effortlessly. Smart control knob The control knob is easy to navigate. Users are able to manage their welding solutions in one setting. They can select welding process and adjust welding parameters (e.g. power, weld bead width, frequency, etc) , and the knob will automatically store customized parameters for their operations in the future. Portable design, integrated power structure Without built-in water tanks or cooling fans, BodorWelder 1500 takes up a covering area of 0.24㎡. This compact machine aims to help users with complex welding jobs in diverse working scenarios. It also comes with a set of Bodor welding nozzles, fulfilling all kinds of requirements. Hedpfx Aaoqx Hnyoisfk

Year of construction: 2026, condition: new, functionality: fully functional, ECOSPIR EV These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with their sophisticated and well-engineered technology. Easy operation via touchscreen display. Minimal installation effort – Plug and Play. Technical Data: Operation via TOUCH SCREEN Hfjdpfxjhfdc Re Aaijk Storage of up to 8 wrapping programs Film tension control with mechanical brake Turntable diameter: 1500 mm Continuous turntable load capacity: 2000 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1 kW Machine with CE marking Warranty: 24 months Options: upon request Ramp 1500 mm Ramp for electric pallet truck (length 3000 mm) Tower extension for pallet heights up to max. 2700 mm POWER PRE-Stretch 200% POWER PRE-Stretch 250% POWER PRE-Stretch 0–400% (with frequency inverter) Black-light photocell – €490.00

Condition: used, Used and in good condition Koma Multi-deck KMD-4-240-1500 Z-profile freezer with 3x hand over of product. Effective belt width 2.380 mm and effective belt length 4 x 15.000 mm. Belt speed can vary between 0,07 m/min and 2,30 m/min. Belt drive motors 4x Flender This multi-deck comes with a complete installation. 6x Bitzer S6F-30.2Y-40P (x2) compressor set with liquid reciever, oil separator, filter, pressure safety switches and gauges. 6x Koma CAV L09 1x2A condensors with 2 fans. Installation complete with control panel with Somron sysdrive inverters. drives and automation. 6x Evaporators from Goedhart LLK.p 187 M2 with a capacity of 27 kW at 25.000 m³/h per piece. Fans have a downblow of 45°C. This tunnel freezer is currently assembled in our warehouse as you can see in the last photo, ready for a viewing. 800 piece/h apple pie in 60 minutes ( 2200 grams/piece) +40ºC to -18ºC. Hfodsrlk Ikspfx Aaijk

Condition: new, Year of construction: 2026, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 L Description: The EVP 1500 vibratory finishing machine from ERBA features a flat working tank bottom without separation. It is ideally suited for larger and heavier workpieces. Emptying and/or separation is performed via bottom discharge (manual/pneumatic). Upon request, the machine can be equipped with reinforced suspension and a reinforced motor for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). The system can also be equipped with fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also due to the hot-cast polyurethane lining of the working tank. As an experienced partner, we offer expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net plus the currently valid statutory VAT and plus freight costs. Items shown in pictures may include accessories that are optionally available and subject to additional charges. The quoted price refers to the base machine. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. Hjdjyq N Drjpfx Aaiefk The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, along with information on our general terms and conditions including imprint and the right of withdrawal, before any purchase/contract conclusion occurs.

Condition: new, Lifting capacity 1500 Kg Hfodpfx Ajvblgysaisk weight 0,045 t dimensions 0,44 x 0,22 x 0,25 m