Used Eisele Va-0-H for sale (109,117)

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN Redjquuufjpfx Alaocf CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Rodpsvdk A Eefx Alaecf Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. Rodpfxszhki Ae Alaecf The machine will arrive at the end of August and will then be refurbished. The photos show the original condition.

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles Rsdpfeyyzxhjx Alascf The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Year of construction: 2016, condition: used, Max. push length: 3000 mm Rsdpfsza Akwox Alascf Sled can be folded up Manual movement Right-hand attachment 2 adjustable feet Plastic rollers

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Rcodpfxsy Tizks Alasf Price: 2,000 Euros

Condition: good (used), Year of construction: 1993, Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, Double miter saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm Rcedpetxkprofx Alajf -Saw units: swivels 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rcedszcpv Sopfx Alaof Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Rcodpfx Alsuiy Hreaof Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Rjdpfxsu Nit Rj Alajcf Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Rcsdpfexpd D Nex Alasf Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: used, Year of construction: 1984, machine/vehicle number: 0278, type of input current: three-phase, input voltage: 400 V, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Rcsdpfot A Arljx Alasf Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Rodpfxsf Dwa Us Alaecf +++++

Condition: used, Max. punching force: 100 kN Rcodpfx Alsxrmz Aoaof Adjustable stroke, max. 50 mm Stroke activation via foot switch Weight: approx. 600 kg

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Redpfx Asfitbwolaecf Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Weight 300kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Weight: 360 kg Operating principle: hydropneumatic Rodszvz Dtjpfx Alajcf Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm

Year of construction: 2023, condition: ready for operation (used), An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Rodpfew D Et Rox Alaecf

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Rsdpfx Alszpfgrjajcf Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. Rsdpfx Alozrk Rbeaocf * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5562, Offer 24212 Technical data: - Saw blade diameter: up to 350 mm Rcjdezqtntspfx Alajf - Saw blade feed via hand lever - Maximum opening width of the vise: 205 mm - Cutting range: - with saw blade diameter of 350 mm - at 90°: - round: 120 mm - square: 110 mm - rectangular: up to 200 x 90 mm or 140 x 110 mm - at 45°: - round: 100 mm - rectangular: 100 x 100 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Saw blade speeds: 34 + 68 1/min - Drive: 400 V / 2 / 2.6 kW - Coolant system - Feed – roller table: 2000 mm - Space requirement: approx. W 850 x H 1750 x D 950 mm - Weight: approx. 400 kg

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 256 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details. Rsdpfezwxmzsx Alajcf • Working capacity: • Maximum swing diameter: 280 mm • Distance between centres: 1,000 mm • Capacity with open steady rest: 70 mm • Capacity with closed steady rest: 70 mm • Minimum machinable diameter with a worn Ø250 mm grinding wheel: 0 mm (applicable at a workpiece swing diameter of 250 mm) • Workhead and tailstock: • Workhead swivel range: 90° • Workhead spindle taper: Morse 4 (ISO 296-91) • Tailstock quill taper: Morse 4 (ISO 296-91) • Tailstock quill stroke: 25 mm • Tailstock centre transverse adjustment (cylindricity correction): ±0.08 mm • Tailstock clamping force: 360 N • Grinding wheel head: • Swivel range: ±45° • Total adjustment range: 270 mm • Rapid traverse travel: 0–270 mm • Rapid traverse speed: 2,000 mm/min • Infeed per handwheel revolution (relative to diameter): 0.1 mm • Minimum manual infeed (relative to diameter): 0.001 mm • Automatic working infeed range (relative to diameter): 0.001–270 mm • Grinding wheel: • Standard dimensions: Ø400 × 40 × Ø127 mm • Maximum wheel width: 40 mm • Axes: • X-axis travel: 256 mm

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm - Square: 82 x 82 mm - Miter cut: at 45° - Round: 110 mm - Rectangular: 80 x 120 mm Rcjdszqtrfspfx Alaof - Square: 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm - Weight: approx. 300 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Type: AKF 250L Motor: 400V, 2.2kW Speed: 2800 rpm Arbor diameter: 250mm Arbor shaft diameter: 40mm Cutting width: 300mm Cutting depth: 85mm Rcjdpfxozvz Dyo Alajf Profile height: 160mm Weight: approx. 150kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm Rcjdpfx Ajh I Dvnelaef cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg

Condition: used, heavy-duty saw head with a robust base and material clamp for non-ferrous metals and aluminum, saw blade 350 mm, Rcsdpfxezwhd Ae Alaof more powerful motor, with pneumatic feed and 2 pneumatic material clamps.