Used Embossing-Calender for sale (197)

Year of construction: 2002, condition: used, Working widths 1800 mm roll surface width 2000 mm Number of rollers 2 St./ea Upper roll Gravur oder Stahl dia diameter of upper rolls 210 mm Heating - upper roll Elektro Lower roll Gummiert dia diameter of lower rolls 300 mm Roller covering - soft rubber 95 °Sh weight 2 t dimensions of the machine ca. 3,0 x 1,5 x 1,8 m Embossing Calender with exchangeable top roll, The following spare rollers are included with the machine: • 1 x steel roll, chrome plated • 3 x engraving rolls, various designs • 1 x spare bottom roll - rubber coated On the outlet side there is a small batch - rising batch winder Njdpfx Aet An E Roc Tocu ATTENION: the electrical control unit is defective, still needs to be replaced, therefore SPECIAL PRICE for self-repair

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll-to-roll processing (100 m/min) Sheet material can also be processed; separate feeding tables are included. Exchangeable cylinder (fine linen embossing pattern) The machine is in very good condition and has few operating hours. Ncodpfx Ajhr Rlyjc Teu Machine manual / operating instructions.

Year of construction: 2015, condition: used, functionality: unexamined, machine/vehicle number: 116.067.00, 2 Walzen Ramisch Guarneri calender, type RGK 280.2000, configured as an inline calender with expansion stages for double-sided Simili mercerization of Jacquard cotton fabrics: 2-steel roller system with unwinding and rewinding units, Maier rotary head (cooled version), moisturizing system after unwinding, centrally controlled and braked unwinding, metal detector, seam monitor, stationary introduction system (3 rollers) motorized for tension regulation, 2 cooling rollers, rewinding combination (large bobbin winder with center winder), crane runway above the unit, 2x Yale overhead cranes (manually movable via chain). The condition can be seen from the attached appraisal report. Ncedpfxoyiurrj Ac Tju

Year of construction: 2017, condition: used, Embossing machine Kolbus PE 312 Age: 2017 Machine is intended for blind embossing, film embossing and hot embossing of firm, flexible and plastic cases. Configuration: - Copilot system with touch screen - Case pre-stacking conveyor (positioning with case overlap) - Case bending station - Case supply with 90 ° pivoting option (format-dependent) - Film feeder with two film pulling rollers - Unwinder - Film withdrawal unit - Motorised embossing head adjustment (max. 70 mm) Nsdpfxszgc Ibe Ac Tocu - Divided embossing table plate - Correction rails for positioning precisely according to the register - Temperature-controlled embossing head heater with timer for pre-heating - Linear deposit belt with delivery table including overlap width setting - Automatic case counter - Servo-controlled drive technology based on Siemens technology - Counter-stacker delivery to the right with roller conveyor delivery Special equipment: - 1 embossing plate for accommodating the embossing tool (adhesive fastening) - 1 embossing plate with grid holes for accommodation (screw connection) - Case set-up outside of the machine for reducing the make-ready time - 3rd film pulling roller controlled by step motor for the 1st film feeder - 2nd film feeder with two film feed rollers controlled by step motors - 3rd film pulling roller controlled by step motor for the 2nd film feeder - Set-up for embossing time extension - Set-up for multiple embossing - Cycled feed for ideal utilisation of the film Technical specifications: - opened case (hardcover) max.: 660 x 405 mm - opened case (hardcover) min.: 155 x 100 mm - opened case (flexible embossing material) max.: 400 x 300 mm - opened case (flexible embossing material) min.: 135 x 100 mm - case pre-stacking conveyor min.: 155 mm - pressure surface max.: 460 x 355 mm - pressing force max.: 350 KN - mech. speed: up to 80 embossings/min

Condition: used, Can Fastening and Embossing Machine With associated controls and conveyor Nsdpfx Acey Ux H Es Tscu Please note the items in this lot 30466-426 are simultaneously offered in the combination lot 30466-425 as a complete line. The separte parts of the complete line 30466-425 are offered as individual lots 30466-426 to 30466-433 Bidders can bid on the complete line and/or on individual lots. Sales are conditional and subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: good (used), Year of construction: 1966, Original Heidelberg hot foil stamping unit Ncodpfsy Ahmdox Ac Tju

Year of construction: 1976, condition: used, Embossing machine Ncjdpfx Ajzat H Ajc Tju Kolbus PE - PE 70 Year: 1976 Tandem configuration consisting of 2 interconnected Kolbus PE 70 embossing machines. - Case pre-stacking conveyor - Case bending station: DBA - Foil transporting device - Case infeed 90° swivelling

Condition: excellent (used), functionality: fully functional, control type: manual, actuation type: mechanical, sheet thickness (max.): 10 mm, Equipment: cone bending device, foot remote control, OMEG three-roll mechanical plate bending machine Useful bending length: 2050 mm Lower roll diameter: 200 mm Upper roll diameter: 250 mm Bendable thickness: 8-10 mm Cone bending device Njdpfxoy H Ikkj Ac Tscu Extended rolls for profile bending Used machine in perfect working condition.

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-roll mechanical calender. Available for immediate delivery, subject to prior sale. Model: FX4.90.1330. Double-nip configuration. Working width: 1330 mm. Diameter of upper and lower rolls: 90 mm. Diameter of side rolls: 95 mm. Thickness range: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Motorized upper and lower rolls with equal power. Motorized side rolls for up/down movement. Front opening of the upper roll. Roll hardness: HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for adjusting roll inclination. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Indicator in mm for reading sheet clamping. 4-ROLL MECHANICAL CALENDER with double-nip configuration and front release. The upper roll is fixed, while the up and down movement is applied to the side rolls and the lower roll. Sheet clamping is very easy, as once the sheet is inserted between the upper and lower rolls, the latter rises and locks the sheet in place. Power: 1.8 kW Dimensions: 800 x 2100 x H 1300 mm Ncsdpfx Aefh Skpec Tou Weight: 625 kg Included with the machine: Conical device on the front of the upper roll. No. 02 digital displays for the position of the side rolls. Grinding/Turning of the rolls after heat treatment. Roll hardening.

Condition: like new (used), Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Njdpfey Eyy Uex Ac Tecu Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers

Year of construction: 2010, condition: used, functionality: fully functional, The Klieverik GTC81/1850SP FLOWLINE is designed for efficient single-piece transfer printing, but also supports cut sheet repeat jobs and roll-to-roll transfer printing. Nsdpfjzaq E Nsx Ac Tscu Maximum material width: 1650mm Speed: 0.1-2 m/s Drum: 195mm Maximum temperature: 220°C We use it very little, and it is in very good condition.

Year of construction: 1977, condition: good (used), machine/vehicle number: 12200, Cylinder diameter: 400 mm Ncodjy Ui Uyopfx Ac Teu Cylinder length: 1000 mm Max. pressure between cylinders: 2 x 450 kN

Condition: used, CORTELLEZZI MECHANICAL CALENDER 2500 mm, DIMENSIONS: 480X100X 130 (h) mm. UPPER ROLLER 200 mm, TWO LOWER ROLLERS 170 mm. NO INVITATION, IT BENDS PROFILES. BENDING THICKNESS 8 Ncsdpfx Ajv Ifinjc Teu

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Njdpfx Acov Uraaj Tjcu Good condition

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Nsdpfx Ajxzvamec Tocu Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Nedponr Npyofx Ac Tscu

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Ncodpfx Ajy Nnakoc Tju

Year of construction: 2005, condition: ready for operation (used), A Klieverik roll-to-roll sublimation and transfer printing calendar is available. Media width: 3200mm, max. working width: 3200mm, heating cylinder diameter: 195mm, max. temperature: 220°C, process speed: 1.25m/min, production capacity: approx. 135m²/h. Machine dimensions X/Y/Z: approx. 4150mm/1200mm/1550mm, weight: approx. 1900kg. Documentation available. An on-site inspection is possible. Njdsy Nnaqjpfx Ac Tscu

Year of construction: 2009, condition: ready for operation (used), Working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Documentation available. An on-site inspection is possible. Nodpfxeyyy N Ee Ac Tjcu

Condition: used, Meyer Embossing Press, Type AHV-CPL 8050 Ncjdpobq A A Nofx Ac Tju Machine number: 697102

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. Ncodpfjvt Rpqjx Ac Tou You are welcome to view the machine in our company by prior appointment.

Year of construction: 1986, condition: used, machine/vehicle number: 1968137, Hot stamping and thermal printing machine Plate size 250 x 250 mm Stroke 160 (250) Nedjbq Svajpfx Ac Tecu Pressing force 14 kN

Year of construction: 1963, condition: used, roll surface width 450 mm roll diam. toproll 203 mm roll diam. bottom roll 203 mm output 8,8 kw Small roll gap 0.1 mm Maximum roll gap 47 mm Front/rear roll speed 5-30 rpm Front/rear roll speed 3.2-19.1 m/min Rolls individually driven Friction variable max. 1:6 Manual gap adjustment Manual speed control External temperature control Rollers internally cooled (water cooling) Emergency stop handle (manual operation) on both sides The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Nedpfxsyt Rxcs Ac Tecu We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1997, functionality: fully functional, BAIER Geba 46/A embossing and punching machine, year of manufacture 1997 fully operational - two punching units - Geotin cutter - operating documentation max. material width: 250 mm max. punching width: 240 mm heating power: 2200W embossing force: 100kN Ncodjyt Igwjpfx Ac Tou

Condition: ready for operation (used), A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible. Ncedpfxjyn Nzfs Ac Teu