Used Engel Duo 3550/550 Tech for sale (8,271)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 29,598 h, clamping force: 5,500 kN, screw diameter: 80 mm, total height: 2,230 mm, overall weight: 20,000 kg, product length (max.): 8,840 mm, This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information. • Maximum injection volume: 1,960 cm³ • Minimum mould height: 310 mm • Maximum mould height: 800 mm • Platen opening stroke: 850 mm • Platen dimensions (W x L): 1,345 x 1,280 mm • Tie-bar distance (H x V): 915 x 860 mm • Motor power: 55 kW • Heater power: 47.5 kW • Injection nozzle radius (at tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 • Operating hours: 29,598 h • Condition: Excellent Ljdpfx Acex Nr H Ijfshk Additional equipment • Robot: Not equipped • Robot interface: None • Other accessories: None reported

Condition: ready for operation (used), Year of construction: 2013, operating hours: 60,672 h, clamping force: 4,000 kN, screw diameter: 80 mm, total height: 2,360 mm, overall weight: 11,000 kg, product length (max.): 7,420 mm, This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine. • Operating hours: 60,672 h • Condition: Excellent • Status: In production • Maximum injection volume: 1,960 cm³ • Minimum mould height: 350 mm • Maximum mould height: 850 mm • Platen opening stroke: 1,050 mm • Platen dimensions (W × L): 1,100 × 1,190 mm • Tie-bar distance: 800 × 800 mm • Motor power: 70 kW • Heater power: 52.95 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Robot equipped: Yes • Robot interface: Euromap 67 Ledpfjx Nr Ryjx Acfehk

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping force: 6,500 kN Distance between columns: 1,025 × 930 mm Minimum mold height: 450 mm Maximum mold height: 950 mm Maximum opening width: 1,800 mm Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g MACHINE DETAILS Lhedjzncmaepfx Acfok Rated power of pump motor: 55 kW Heating capacity: 62 kW DIMENSIONS & WEIGHT Dimensions at installation site (L × W × H): 8,300 × 2,500 × 2,330 mm Weight: approx. 33,000 kg

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Lhodpozvc N Rjfx Acfsk Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: new, Year of construction: 2025, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL duo 3660/650 tech Year: 2025 Control: CC300 Integrated robot: ENGEL VIPER 40 Clamping force: 650 t Injection unit: 810 Screw diameter: 80 mm Possible screw diameters: 55 / 60 / 70 / 80 mm Shot volume: 1810 cm³ Injection capacity: 1660 g PS Injection pressure: 1800 bar (max. 2000 bar) Injection speed: 493 cm³/s Screw stroke: 510 mm Screw torque: 3600 Nm Max. screw speed: 210 rpm Lhsdpfx Aoza Au Necfok Plasticising rate: up to 118 g/s Nozzle orifice: 12 mm Tie bar distance (H x V): 1110 x 960 mm Platen size (H x V): 1510 x 1440 mm Opening stroke: 1800 mm Max. daylight opening: 1950 mm Mould height min./max.: 350 - 1200 mm Dry cycle: 2.8 s Ejector stroke: 250 mm Ejector force: 105 / 51 kN Installed drive power: 74 kW Oil tank capacity: 750 l Equipment: * ENGEL VIPER 40 integrated robot * 2-fold hydraulic core pull on moving platen * Tool heating with 32 control circuits * Hydraulic machine

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Ledpfx Acszrd Ugjfshk The machine has not been tested but was operational until the end.

Condition: not inspected (used), Year of construction: 2001, operating hours: 108,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Lhjdpfx Acezrd Tpofek Automation is not included in the system. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the end.

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic Lodpfx Acey Uffhsfjhk VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm Ledpfxsw U Sz Is Acfohk C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system Lhjdpeyw Aa Uofx Acfek - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Ljdpfxeywrtwo Acfohk Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Lsdpfxozpatms Acfshk Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, machine/vehicle number: 180299, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (Unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing rate: 77 g/s Nozzle pressure force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Lhedpfjy T Hfysx Acfok Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 pieces (mounted on the fixed platen)

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, clamping force: 6,500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Ljdpfxoy Ug Ahj Acfehk Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits RC 200 integrated with C30 E handheld control unit

Condition: ready for operation (used), Year of construction: 2003, clamping force: 8,000 kN, screw diameter: 90 mm, total width: 3,000 mm, total height: 2,500 mm, overall weight: 44,000 kg, product length (max.): 8,900 mm, Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details. Lhodpfx Asy Alwmjcfsk • Shot volume: ~2700 cm³ • Max. injection pressure: ~1900 bar • Plasticizing capacity: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle), larger mold space for easier changes, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticizing; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large parts, more compact than traditional tie-bar machines, stable industrial design, easy to automate Additional equipment • Not specified/included in the provided information

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 6,374 kN, screw diameter: 90 mm, injection weight: 2,400 g, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 650 t Tie bar spacing: 102.5 mm x 92.5 mm Screw diameter: 90 mm Shot weight: 2,400 g Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced dismantling and loading costs. Lodey Ewxujpfx Acfjhk

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped) Ledsx Nr Uxjpfx Acfshk

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,250 h, functionality: fully functional, machine/vehicle number: 51760, clamping force: 11,000 kN, screw diameter: 90 mm, injection pressure: 1,910 bar, tool height: 1,270 mm, TECHNICAL DETAILS Clamping force: 11,000 kN Platen size (H x V): 2,340 x 2,040 mm Tie bar spacing (H x V): 1,575 x 1,320 mm Min. tool height: 592 mm Max. tool height: 1,270 mm Max. opening stroke: 3,016 mm Injection unit Screw diameter: 90 mm Shot volume: 2,480 cm³ Shot weight (PS): 2,256.8 g Injection pressure: 1,910 bar MACHINE DETAILS Net weight (including control cabinet): 62 + 11 t Lhodpfsxuqbrsx Acfok Operating hours: 70,250 h EQUIPMENT ENGEL ERC 84-1E robot

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle Ljdpfjfnqapjx Acfohk for ENGEL injection unit size ES3550

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Lhsdpfezvwl Tex Acfjk Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: ready for operation (used), Year of construction: 2005, operating hours: 76,988 h, clamping force: 800 kN, screw diameter: 30 mm, total length: 4,050 mm, total width: 1,930 mm, total height: 2,200 mm, overall weight: 5,200 kg, warehouse no.: 503561 manufacturer: ENGEL type: VICTORY 200-80 Tech controller: CC100 year of construction: 2005 operation hours: 76988 h clamping force: 800 kN size of mould plates h x v: 670 x 600 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 30 mm swept volume: 99 ccm injection pressure: 1450 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A Lhsdszt Sdfjpfx Acfjk measures of machine l x w x h: 4.05m x 1.93m x 2.2m total weight: 5200KG technical data robot-system handling type: Linearhandling manufacture: Engel controller: ER-HLI 31 VC year of construction: 2005 handling weight: 2 kg screen-text: deutsch total weight: 250 kg

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Ledpfx Acezt Slpjfehk

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, _ENGEL DUO 1800H/1800M/900 WP 2FCLS – Full Technical Parameters_ Year of manufacture: 2015 Control system: CC300 Lodpfx Acozu Snaofohk Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Hot runner zones: 16 Sequential control zones: 48

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: VICTORY 330/80 TECH Baujahr: 2012 Schließkraft: 80 Tonnen Holmabstand: HOLMLOS Schnecken DN: 35 mm Max. Hubvolumen: 110 ccm³ Spritzteilgewicht 100 g/PS Steuerung: CC200 Ausstattung: -Roboter, Hersteller: SEPRO, Typ: AXESS -2 x Kernzüge -Ausblasventil -Förderband -Sicherheitszaun Ledpfxsztp Ihe Acfjhk

Condition: good (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock no.: 503558 Manufacturer: ENGEL Model: Victory 330-120 Tech Lsdpfjytfgnjx Acfjhk Control system: CC100 Year of manufacture: 2007 Operating hours: 68,651 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Minimum mould height: 300 mm Maximum daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 825 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 1,600 bar Screw L/D ratio: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (L x W x H): 4.5 m x 2.1 m x 2.1 m Total weight: 7,300 kg Equipment Screen text in German CEE socket 16A Hydraulic core pull, 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Levelling elements Interface for ejector plate safety Schuko socket 10A Technical Data – Handling Machine type: Linear Brand: ENGEL Control system: ER-HLI41VC Year of manufacture: 2007