Used Er Mex C-H D-210 for sale (100,893)

Condition: used, Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm -Weight: 8.3 kg Laedpju S Tc Ejfx Amvjg

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm Ledpfx Asy Sub Hjmveag • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: new, Year of construction: 2026, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing Lasdpjt I D Thofx Amvjg fitted.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Lodezgq Szspfx Amvsag Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D Lodpozrfkvefx Amveag - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm The line is sold excluding any warranty and liability for defects.

Condition: used, Year of construction: 1966, Overview  This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  - Capacity: - 2,500 bph - Formats: - Prepared for 0.33 L Longneck - Filling temperature: - 6°C - Overhaul & refurbishment details - General overhaul in 2016: - Pre-evacuation - New rotary ball connection - New stainless-steel table - New electrics - New valve control cabinet in stainless-steel design - 0.33 L guiding set - Sihi vacuum pump Ledpfxeyb Sdvs Amvoag - Renewed in 2023: - Seals on lifting cylinders and filling valves - Vacuum and overpressure valves equipped with new seals and springs

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. Ljdpfezt Ai Ejx Amveag The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PL071105402R, year of last overhaul: 2024, conveyor belt width: 122 mm, Equipment: documentation/manual, M&R dryer for plastisol and water-based inks in textile printing, with a large width of 122 cm. The dryer is in excellent condition and is electrically powered. The belt is wide enough to accommodate two rows of textiles side by side! Lsdpfx Amjw Stp Iovjag We have already disassembled the dryer and prepared it for shipping. Therefore, there are no costs for disassembly. We will also take care of loading it onto the truck. We have a very reliable shipping company locally. The shipping costs depend on the destination. We recommend a direct shipment, which we can arrange!

Condition: used, Year of construction: 2019, operating hours: 2,148 h, Equipment: all wheel drive, Mecalac 9MDX dumper with air conditioning, 2019, with only 2,148 operating hours! ----* Manufacturer: Mecalac * Type: 9MDX * Year of manufacture: 2019 * Operating hours: approx. 2,148 * Payload: 9,000 kg * Operating weight: 5,375 kg * Full cab * Air conditioning * Front camera * Power: 55 kW * Perkins diesel engine * Front tipper Ljdpozkpyfofx Amvoag * Good condition * First owner * More photos & videos on request (WhatsApp Erik) * Price: 24,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee. Errors and prior sale are subject to change.

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. For self-collection. Lodpfx Ajz Atpnemvsag Details see attachment and available upon request. The following parts have been removed: Axle control module PCU Control unit for cooling system

Condition: new, Year of construction: 2020, Storage location number: 100303400 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Sanitary container 10' D/H Being sold as defective! Men: 1x urinal 1x toilet 1x mirror 1x washbasin Women: 1x toilet Lsdpszkzgkjfx Amveag 1x mirror 1x washbasin

Condition: ready for operation (used), Year of construction: 2005, L & Z Lathe / WEILER DA 210x1000 / With new 3-axis digital readout - Year of manufacture: 2005 - CE marking Laodpoy H Ikqofx Amvjg - Guideways in good condition - FULL TECHNICAL DATA SEE PHOTOS - Three-axis digital readout "NEW" - Quick-change collet system incl. 79 collets (173E) - Multifix base holder with inserts - 3-jaw chuck - Electrical chuck guard - Additional sliding guard - Coolant system - Drill chuck / live center - Chip guard rear wall - Work light - Complete documentation Dimensions: LxWxH 2.8x1.2x1.8 meters / Weight 1600 kg Errors / input mistakes excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Hydraulically Lowerable, Sandwich Construction Equipment: - V-shaped drawbar - Manual hand pump - 10x tie-down points Net: €12,100.84 / Gross: €14,400.00 Article number: FKS235351621.01 Technical data: • Brand: Vezeko • Model: Husky FB K C • Vehicle type: Lowering trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 344 x 167 x 210 cm • External dimensions (LxWxH): 510 x 240 x 260 cm • Loading height of the floor: 44 cm • Permissible total weight: 3,500 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • 15mm multiplex floor panel, made of birch wood, with anti-slip coating - extremely robust • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Body made of very massive steel sheet sandwich, insulated, 50mm thick • Outer layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • 2-wing rear door with stainless steel twist-lock, lockable • Doors with special sealing profiles, made of hard/soft plastic • Rear frame on hot-dip galvanized steel, welded • Loading area hydraulically lowerable • Mechanical safety lock of the pivot axle during driving • With foldable stainless steel loading ramp at the rear • Additional longitudinal struts continuously welded • Toolbox at the front • 10 tie-down points inside the V-shaped loading rail, rubber-coated, tensile force (750 DaN/kg) • License plate holder at the rear • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-shaped drawbar, REINFORCED • Reverse drive automatic • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear position lights in LED • Lighting recessed in the rear frame • Support wheel with clamping bracket in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Laodpfxjzy Du No Amvjg Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: refurbished (used), Year of construction: 2020, Dear customers, For quick and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWc 30.20 Dry spray wall Dimensions: 3000 x 2000 mm W x H + Fan at the top Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust duct: 500 Ø mm Depth: 900 mm Double filtration: Paper filter + Paintstop filter mat Clamping bar (+€180.00 net) Options/additional cost for: Laedpsfn Nddsfx Amvjg Paintstop filter mat clamping bar: €180.00 net Side guide plates with hinge: €590.00 net Images may vary. We also offer complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: ready for operation (used), Rehm Tiger 210 DC Welding Machine Manufacturer: REHM Model: TIGER 210 DC Welding processes: WIG DC / MMA Lajdjzy Eqljpfx Amvsg Welding current WIG: 3–210 A Welding current MMA: 3–170 A WIG 100% duty cycle: 175 A (20 °C) WIG 100% duty cycle: 140 A (40 °C) MMA 100% duty cycle: 160 A (20 °C) MMA 100% duty cycle: 120 A (40 °C) Mains voltage: 230 V / 50 Hz You are welcome to visit us for a viewing. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5758 Cat.: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2441 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! Lajdpezv Ru Usfx Amvog - 2 x Blue spot - PSA - Floodlights - Induction / Wire guidance

Condition: used, first registration: 10/2001, Year of construction: 2001, Nooteboom 4-axle container chassis, divisible into 2 sections - 1st section: 1 axle - 11,000 kg gross weight Laedpfxjwmpa Hj Amvjg - 2nd section: 3 axles - 26,000 kg gross weight - ABS - Air suspension - 4 x BPW Eco Plus axles - 1st axle liftable - Raise/lower device - 2 support legs each at front and rear - Tyres: 385/55 R 22.5 - German semi-trailer - TÜV / inspection / SP: New on request and at extra charge! Errors and interim sale reserved!

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC Lajdpfx Ajn Hbc Iomvsg -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5759 Category: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Ljdezv H Tyspfx Amvjag Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2482 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DUAL steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA (Pedestrian Sensing Alarm) - Floodlights - Induction / Wire Guidance

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Lasdpfxszn N T Te Amvsg Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F

Condition: ready for operation (used), Atlas Copco PF4000-C-PN-HW control system. 8433 7148 05 SN D 276 108, used, minor signs of wear, 100% functional, scope of delivery as per photos Lsdpfx Aorv Nz Aemveag

Year of construction: 2026, condition: new, Price is included in packaging and shipping! EverRoast Shop Coffee Roaster has a capacity of 5 kg of green coffee beans per batch and it is a perfect solution for cafes and coffee roasting companies, which want to roast up to 20 KG per hour. Batch Capacity 5 kg Roasting Time 9-13 mins Heat Source LPG/Natural Gas Roasting Principle Conduction & Convection Drum Double Wall Control Unit Manual/PLC(Optional) Fully controllable machine : Airflow Control/Drum Speed Control/Flame Level Control Possible to connect to PC Warranty : 2 Years Your company logo can be added on drum! Lajdpji Hqmyjfx Amvsg You can choose any colors! Please contact us for more coffee roasters and coffee equipment!

Condition: used, mileage: 485,000 km, Year of construction: 2000, Year of construction: 2000 Ljdpfxszkrkmj Amvjag

Year of construction: 1945, condition: used, New: No Serial number: 15 HP Laedewz H Uqepfx Amvsg LISTER DIESEL TAKEN OUT AN OLD ALUMINIUM SLOOP EXACT AGE UNKNOWN.

Condition: reconditioned (used), operating pressure: 180 bar, empty load weight: 130 kg, input voltage: 400 V, temperature: 155 °C, KARCHER HDS SUPER M Eco HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. Ljdpfx Amozxqzaoveag TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 90/155 Connection power [kW]: 6.4 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dispensing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.