Used Erowa Precision Holder 25 for sale (27,639)

Condition: used, Hello, we are offering ten used Erowa precision holders 25 (ER-010607) including clamping pins, which have been disassembled, cleaned and also functionally tested by us. The holders have the usual signs of use but are technically in very good condition. Price per holder with clamping pin plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Gedpfxjq Turie Afuekc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X387X00082, Year of construction: 2020, operating hours: 17,468 h, load capacity: 2,500 kg, lifting height: 3,000 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,000 mm Free lift: 1,500 mm Overall height: 2,000 mm Load capacity: 2,500 kg MACHINE DETAILS Mast type: Duplex Gkodpfsz I N Uzsx Afuoc Vehicle type: Electric 4-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Unladen weight: 3,230 kg Battery voltage: 80 V Operating hours: 17,468 h EQUIPMENT Semi-cab Telescopic forks Side shifter Fork positioner 3rd valve 4th valve External reference: SL15009SP

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Godpfsz Ekcnsx Afuskc Minimum panel width: 195 mm Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes EQUIPMENT Removal of the panel stack via powered roller conveyor Vacuum pump WINDOWS control The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 280127900226, Year of construction: 2008, operating hours: 16,627 h, load capacity: 25,000 kg, fuel type: electric, No minimum price – guaranteed sale to the highest bidder! Comes with a battery from 2024! TECHNICAL DETAILS Load capacity: 25,000 kg MACHINE DETAILS Drive: electric Gkjdpoz I Nbnsfx Afuoc Battery voltage: 80 V Battery year: 2024 Unladen weight: 2,390 kg Operating hours: 16,627 h EQUIPMENT Heater Full cab External reference: SL15869SP

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Gjdpfxsvby U Se Afuskc Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Gjdezd Riuspfx Afuekc Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: refurbished (used), functionality: fully functional, Hello, We are offering rebuilt ER-093996 Square 25 Holder C from Erowa. The holders were converted from the old version ER-010607 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. Including clamping spigots. Gsdpfowa Sffex Afuekc You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: ready for operation (used), Year of construction: 2020, total height: 2,700 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 2,350 kg, product length (max.): 2,100 mm, number of axes: 3, This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. Gkjdpfx Ajx D Hvqefuec • Max. distance between table and probe holder (without probe): 668 mm • Max. distance between columns at table height: 650 mm • Usable granite slab area: 650 x 1700 mm • Max. loadable workpiece weight: 650 kg Additional equipment • PH10MQ touch probe system with SP25M-2 • FCR25-L6 touch probe changer • ARCO Presoft software

Condition: used, EROWA UPC clamping system – pallet holder Gkedpfx Afezpxkdjuoc ER 016093

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Gsdpfx Aoz Ekchefuekc Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Number of controlled axes: 3 Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, Hello, we are offering two used Erowa precision holders 15 including clamping pins. They have been disassembled and cleaned by us and a functional test has also been carried out. The holders have the usual signs of use but are technically in very good condition. Price for both holders with clamping pins plus VAT. If you have any questions, please do not hesitate to contact us. Shipping possible for an extra charge. Gjdpfxsq Hu S Ds Afuekc

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: Godpfx Afozfbu Rjuekc - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: refurbished (used), Hello, Gsdpfx Ajwa I Hrjfuskc We are offering rebuilt ER-093996 square 15 holders C from Erowa. The holders were converted from the old version ER-007986 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: used, Year of construction: 2005, feed rate X-axis: 60 m/min, plate length: 2,500 mm, plate width: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum plate width: 1,200 mm Maximum plate length: 2,500 mm Minimum plate width: 220 mm Minimum plate length: 250 mm Maximum feed rate: 60 m/min EQUIPMENT 90° transfer conveyor CE safety compliance The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. Gksdsz Ekfcjpfx Afusc External reference: 5981

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . Gkjdpfx Afsz Rxh Djuoc .. Ongoing purchase of used German machines without NC or CNC control .

Condition: good (used), functionality: fully functional, Various Erowa tool holders / tool holders are for sale. All holders are functional and tested by us. Can be purchased individually or as a package 1: ER-020571 2: ER-016841 3: ER-016841 4: ER-016841 5: ER-016841 6: ER-016841 7: ER-016917 Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Godpfx Afetwz N Teujkc PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Dndpw7 For further information or contact options, please visit our website

Condition: good (used), Good day, we offer here used clamping devices from Erowa. These belong to the PalletSet W and are for Wire EDM machining. The following parts are available: Fixed holder ER-030678 Floating holder 3D ER-030923 They have been cleaned and tested by us. In addition, a functional test was carried out. The clamping devices have slight traces of use, and are technically in a very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal. Gsdop Eb Dvopfx Afuokc

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Gsdszdkc Uspfx Afuekc Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm -Weight: 34 kg Gjdogl Duhepfx Afuekc

Condition: good (used), We offer here a used UPC chuck with airdock ER-139501 / ER-078728. Additionally with an adapter pallet compatible with ER-115304 for use on milling, grinding, measuring, drilling and die-sinking EDM machines. The chuck has been cleaned and relubricated by us and is in very good technical condition. Gkedpfx Afjviul Ieuoc Please do not hesitate to contact us if you have any questions.

Condition: excellent (used), Hallo, Wir bieten hier kurzen Erowa Kontrolldorn kurz an. ER-008617. Gkedjiqunwepfx Afujc Mit diesem lässt sich der Rundlauf und die Achse ausrichten.Passend für Spannfutter 50 +100. Bei Rückfragen stehen wir gerne zur Verfügung .

Condition: good (used), Javo pot holders 4x 7 cm inner diameter holder Number available: 25 piecesInner size of pot holder: 4x 7 cm Height from bottom plate to upper rim of holder: 6 cm Suitable for Javo Standard and Javo Super More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Gjdpfxoz N U Tgj Afuskc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck for sale. EROWA ER-026229 UPC chuck UPC collet set, 82/82 mm through-hole (special version) Gkjdjzw D E Nspfx Afuec Year of manufacture: 2023 New price: €9,940 The chuck is in very good condition and fully functional. Inspection possible by appointment. Shipping and inspection are possible!

Condition: used, functionality: fully functional, Ferwood code: RU0009932 - Manufacturer code: 4-014-12-0207 - Condition: Used - Functionality: Fully operational - Compatible machine: - If interested, we offer an overhaul service. Please contact us. 1KG - 20X20X20 Godpfx Afsyk Eduoujkc

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Max length workable: 2500 mm Godou H R Hmspfx Afujkc Max height workable: 250 mm