Used Espec (Thermotec) Ehs-221Md Stress Test Chamber for sale (13,321)

Condition: used, Espec Type: EHS-221MD External dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions W x H x D: 355 x 355 x 426 mm 2 x 46 liters Voltage: 230 V 1/N 50 Hz Hodpfxjzfy N Ts Akrsnu Rated current: 37A Fuses: 250 V, 2 x 3 A Temperature range: +105°C to +142.9°C Humidity range: 75 to 100% RH Temperature stability: ± 0.5°C Pressure range: 0 to 2.0 kg/cm² Heating/pressure build-up time: from 0 to 2.0 kg/cm² in approximately 60 minutes Weight: 390 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Espec Type: EHS-221M Espec (ThermoTec) Stress Test Chamber Hnedozd Uy Dspfx Akrju Overpressure and humidity tests at over 100 degrees Celsius in many different modes. Program capacity of 10 samples with 30 steps per sample. A variety of safety mechanisms: over-temperature/overpressure protection, detection of water supply failure, complete door interlock, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Nominal pressure: 0.196 MPa at 132.9°C and 100% r.h. External dimensions: Width 740 x Height 1553 x Depth 1000 mm Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Other equipment: with rails and grating Test specimen connections inside Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Espec Climate testing chamber / temperature testing chamber Espec PL-4J climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / temperature testing chamber Year of manufacture: 2020 Test chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. power consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable entry Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J climate testing chamber Hnedszntxmjpfx Akrsu Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Espec Climate testing chamber / Temperature testing chamber Espec PL-4J Climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Testing chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 21 A Hnsdjzntunspfx Akrou Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable gland Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber / Liquid-to-Liquid Shock Chamber ESPEC TSB-51 Temperature Shock Chamber Temperature range: Hot bath +70 °C to +200 °C / Cold bath -65 °C to 0 °C Approximately 13,611 operating hours Air-cooled For sale is a used liquid-to-liquid temperature shock chamber from the manufacturer ESPEC CORP. The temperature shock chamber is suitable for thermal shock testing, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system operates with a liquid-to-liquid testing process with a movable test basket between the hot and cold baths and features a programmable controller. Technical data: Manufacturer: ESPEC CORP. Type: TSB-51 Equipment type: Liquid-to-liquid temperature shock chamber Operating hours: approx. 13,611 h Temperature range, hot bath: +70 °C to +200 °C Temperature range, cold bath: -65 °C to 0 °C Bath volume: approx. 55 liters Test basket: 150 × 150 × 200 mm (W × H × D) Internal dimensions: 290 × 350 × 520 mm (W × H × D) External dimensions: 1200 × 1785 × 1320 mm (W × H × D) Weight according to nameplate: 800 kg Power connection: AC 400 V / 3-phase / 50 Hz Max. power consumption: 22 A Refrigerant 1: R404A Refrigerant quantity: 2.8 kg Refrigerant 2: R508A Refrigerant quantity: 0.89 kg Equipment: Programmable ESPEC controller with display Liquid-to-liquid temperature shock testing system Movable test basket Hot bath and cold bath Overcooling protection Hodpfxjz Hb Tyo Akrenu Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet and USB interfaces Operating manuals as shown in the pictures Application areas: Temperature shock testing Thermal cycle testing Material testing Electronics testing Component testing Automotive Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Device powers on / Controller and display are active Scope of delivery: 1x ESPEC TSB-51 temperature shock chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg Hnedpfjzizl Rex Akrju For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Hedpfxozhkfqe Akronu Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Espec Type: EGN28-6CWL Espec, water-cooled temperature chamber Temperature test chamber, N series Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Temperature range: -70 to +180°C Temperature change rate: Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg For your safety as a buyer, please note the following: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) Hnsdpezg Tynefx Akrsu We will gladly answer any further questions you may have by phone.

Condition: used, ESPEC Type: PL-3KPH ESPEC Climate Testing Chamber / Environmental Simulation Chamber Model PL-3KPH Air-cooled version For sale is a high-quality ESPEC climate testing chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected according to the images. The current display shows STOP / ready for operation. Technical data Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Internal dimensions (W x H x D): 600 × 850 × 800 mm External dimensions (W x H x D): 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Weight: approx. 350 kg Cooling: air-cooled (no external water connection required) Refrigerant: R404A Equipment / Features Touchscreen control panel Program and constant operation modes BTHC temperature and humidity control Observation window in the door Stainless steel test chamber Internal lighting / Chamber lamp Side cable entry Overheat protection Hour meter integrated Industrial design For your security as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Scope of delivery ESPEC Climate Testing Chamber PL-3KPH Scope of delivery as shown in the images Condition & Notes Hsdpfx Asy H H Iuekrsnu Condition: used Inspection possible by arrangement. Loading with a forklift can be organized. (Subject to changes, prior sale, and errors in the technical data!) If you have any questions, please do not hesitate to contact us.

Condition: used, Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate testing chamber For your peace of mind as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with refrigerant that complies with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Hnedpfx Aszgtahokrou Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature testing chamber / Stress screening chamber CTS TS-70/200-5/S temperature testing chamber Temperature testing chamber, -70 °C to +180 °C, approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Device type: Temperature testing chamber / Stress screening chamber Test chamber volume: approx. 200 liters Test chamber dimensions: approx. 650 x 400 x 750 mm (W x D x H) Housing dimensions: approx. 920 x 1345 x 1800 mm (W x D x H) Weight: approx. 550 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 8 K/min Temperature change rate, cooling: approx. 6 K/min Max. heat radiation at +20 °C: approx. 3500 W Actual test run according to protocol: Heating: approx. 10 K/min Cooling: approx. 6.25 K/min Temperature test from -70 °C to +180 °C documented Power connection: 400 V 3/N / 50 Hz Power: 10.9 kW Rated current: 15.7 A Protection class: IP22 Refrigerant pre-cooling stage: R404A Refrigerant quantity pre-cooling stage: 2.5 kg Refrigerant cooling stage: R23 Refrigerant quantity cooling stage: 0.6 kg / 15 bar Hnsdjzf Hi Hspfx Akreu Operating pressure PS: 25 bar Test pressure PT: 20 bar Operating hours according to protocol: approx. 25,977 h Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side access ports as shown in the pictures Insert grid / Test chamber equipment as shown in the pictures Over-temperature test item protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Accessories as shown in the pictures Application areas Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x CTS TS-70/200-5/S temperature testing chamber Insert grid / Test chamber equipment Existing documentation / documents Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding possible. Changes, errors and prior sale reserved. We would be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Hnsdpfozpy Idex Akrju Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Hodpfxozimfve Akrenu Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Hjdezm Ni Eepfx Akrjnu Climate testing chamber / Temperature testing chamber Vötsch VC³ 7018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 190 liters Dimensions (approx.): Width: 870 mm, Depth: 1,550 mm, Height: 1,800 mm Test chamber dimensions: Width: 580 mm, Depth: 450 mm, Height: 750 mm Weight: approx. 460 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 3 K/min Max. heat compensation: approx. 1,500 W Temperature deviation (time-related): ± 0.1 to ± 0.3 K Climate range (temperature): +10 °C to +95 °C Humidity range: 10 to 98 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg ND max.: 22.5 bar g HD max.: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.9 kW Rated current: 16 A Equipment Touch panel control Programmable controller Stainless steel interior Temperature and humidity control LAN/Ethernet interface Viewing window with internal lighting Documentation / Operating manual Test reports Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Workshop-checked Moisture absorber replaced Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC³ 7018 climate testing chamber Documentation / Operating manual Test reports Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate test chamber / Temperature test chamber Vötsch VC³ 0034 Climate test chamber Temperature and climate test chamber, air-cooled For sale is a used climate test chamber from the manufacturer Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Equipment type: Climate test chamber / Temperature test chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Weight: approx. 490 kg Temperature range: -10 °C to +90 °C Temperature change rate, heating: approx. 1 K/min Temperature change rate, cooling: approx. 0.3 K/min Max. heat compensation: approx. 200 W Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1 K Climate range, temperature: +10 °C to +90 °C Dew point range: +4 °C to +89.5 °C Humidity range: 10 to 98 % RH Refrigerant: R404A Refrigerant quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.3 kW Rated current: 10 A Water tank: 20 liters Protection class: IP54 Noise level: approx. 46 dB(A) Equipment SIMPAC control Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface RS232 interface RS485 / RS422 interface Test specimen protection function Cable glands Documentation / Operating manual Accessories according to images Hnodpfx Akozgb Awersu Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x Vötsch VC³ 0034 Climate test chamber Documentation / Operating manual Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Temperature test chamber / climate test chamber Weiss WT-270/70/10 temperature test chamber Temperature test chamber, water-cooled, -70 °C to +180 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Device type: Temperature test chamber / climate test chamber Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 10 K/min Temperature change rate cooling: approx. 14.5 K/min Temperature deviation over time: ± 0.3 to ± 0.8 K Temperature deviation spatially: ± 0.5 to ± 2 K Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure: 19 bar g Maximum discharge pressure: 25 bar g Standby pressure: 17 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Shelf / test chamber equipment as shown in the pictures Control cabinet Main switch panel Connector panel RS232 interface Documentation / operating manual Accessories as shown in the pictures Application areas Temperature testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Weiss WT-270/70/10 temperature test chamber Documentation / operating manual Accessories as shown in the pictures Hjdpezgcqvjfx Akronu Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate test chamber / temperature test chamber Vötsch VC 4060 climate test chamber Temperature and climate test chamber with humidity, water-cooled (converted to R-452a) For sale is a used climate test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Hjdpfxezf E E To Akrenu Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Equipment type: Climate test chamber / temperature test chamber Test chamber volume: approx. 600 liters Controller: S!MCON / 32 Test chamber dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 4.0 K/min Temperature change rate, cooling: approx. 3.0 K/min Temperature deviation, temporal: ±0.1 to ±0.5 K Temperature deviation, spatial: ±0.5 to ±2 K Temperature gradient: approx. 1 to 4 K Climate range, temperature: -10 °C to +95 °C Humidity range: 10 % to 98 % RH Humidity deviation: ±0.1 to ±3 % RH Temperature deviation, climate operation, temporal: ±0.1 to ±0.3 K Temperature deviation, climate operation, spatial: ±0.5 to ±1.0 K Temperature gradient, climate operation: approx. 1 to 2 K Refrigerant: R452A Cooling: water-cooled Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated power: 7.8 kW Rated current: 15.0 A Fuse: 16 A slow-blow, provided by the customer 1 penetration Ø 50 mm, installed on the left 1 penetration Ø 125 mm, installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 controller Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side penetrations Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC 4060 climate test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding by a freight carrier is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC 4034 Climate testing chamber Temperature and climate testing chamber, air-cooled Converted to R452A For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Equipment type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 3.2 K/min Temperature change rate, cooling: approx. 3.5 K/min Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Hnodozd Dm Hspfx Akrou Climate range, temperature: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1.0 K Refrigerant: R452A Refrigerant quantity: 2.5 kg Maximum suction pressure: 22 bar g Maximum discharge pressure: 25 bar g Mains connection: 3/N/PE AC 400 V +10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side feedthrough Insert grid Air-cooled system Documentation / Operating manual Accessories according to the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to the pictures Scope of delivery 1x Vötsch VC 4034 Climate testing chamber Insert grid Control panel / controller Documentation / Documents Accessories according to the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Hnodpozf Ibkofx Akrou Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Features: Multi-touch control USB and Ethernet interfaces Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Hnodpfx Aksziizyjrsu Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VCS³ 7034-5 Climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7.0 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2.0 K Climate range (temperature): +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittent) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: Hedpfszpihajx Akrenu S!MPAC control system Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface USB interface Cable gland 50 mm Cable gland 125 mm Test object protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature and humidity testing chamber Vötsch VCS³ 7034-5 climate testing chamber, water-cooled Temperature range from -70 °C to +180 °C with humidity control Workshop-tested with documented test run and only approximately 3,485 operating hours For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The climate testing chamber is suitable for temperature and humidity tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large viewing window and a lateral test specimen port. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature and humidity testing chamber Year of manufacture: 2016 Operating hours: approx. 3,485 h Temperature range: -70 °C to +180 °C Humidity control: available Water-cooled version Test results documented in the workshop protocol: Temperature change rate, heating: approx. 7.65 K/min Temperature change rate, cooling: approx. 7.71 K/min Humidity test at 30 °C / 40 % r.h. Humidity test at 80 °C / 85 % r.h. Refrigerant 1: R404A Refrigerant quantity: 2.50 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Standing pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Nominal power: 9 kW Nominal current: 20 A Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): 750 × 580 × 765 mm External dimensions (H × W × D): 1,800 × 872 × 1,758 mm Weight: 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled version Interior made of stainless steel Large viewing window Test chamber lighting Separate digital temperature and humidity display Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Several stainless steel inserts in the test chamber Program operation and manual operation Application areas: Hjdjzqmx Espfx Akrjnu Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of supply: 1x Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the images Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional test and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items that are not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch   Temperature Shock Chamber / 2-Chamber Shock Test System   Vötsch VT³ 7012 S2 Temperature Shock Chamber Warm chamber +50 °C to +220 °C / Cold chamber -80 °C to +70 °C 125 liter test chamber volume – Year of manufacture 2018 – water-cooled version   For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is used for performing rapid and shock-like temperature changes and is particularly suitable for environmental simulation, Environmental Stress Screening (ESS), quality assurance, as well as stress and reliability tests of electronic components, assemblies, and other test specimens.   The VT³ 7012 S2 operates according to the 2-chamber principle with a warm and cold chamber. The test specimen is transported between the two temperature zones in a vertically moving test carriage and is thus subjected to rapid temperature changes.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Device type: Temperature shock chamber / 2-chamber shock test system Year of manufacture: 2018 Made in Germany Hsdpfx Aezzazujkrsnu   Test chamber volume: 125 liters Number of chambers: 2 Temperature range warm chamber: +50 °C to +220 °C Temperature range cold chamber: -80 °C to +70 °C Max. test weight / test carriage load: 50 kg Refrigeration unit: water-cooled   Refrigerant 1: R449A Refrigerant quantity: 1.70 kg GWP: 1,397 CO₂ equivalent: 2.37 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.27 kg GWP: 14,800 CO₂ equivalent: 18.80 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Operating pressure: 14 bar g   Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A   Test chamber dimensions (W × D × H): 470 × 650 × 410 mm External dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required room height for operation: approx. 2,450 mm Weight: approx. 1000 kg   Equipment:   2-chamber temperature shock system Vertically moving test carriage Programmable touch panel control CONTROLPAD for status display Temperature control Test chamber lighting Observation window Pipe connection Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / remaining runtime display USB and Ethernet interfaces   Areas of application:   Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Lifetime and stress tests   Condition:   Used Optical condition as shown in the pictures   Scope of delivery:   1x Vötsch VT³ 7012 S2 Temperature shock chamber Touch panel control Equipment and accessories as shown in the pictures   Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping by freight forwarder is possible. Subject to change, errors and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Hnedpfeztu Nqsx Akrju Vötsch VC³ 4018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018 Device type: Climate testing chamber / Temperature testing chamber Testing chamber volume: approx. 190 liters Testing chamber dimensions: approx. 580 x 450 x 750 mm (W x D x H) Housing dimensions: approx. 870 x 1550 x 1800 mm (W x D x H) Weight: approx. 470 kg Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 5 K/min Max. heat compensation: approx. 2300 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.5 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ± 1 to ± 3 % RH Heat compensation (climate operation): approx. 400 W Refrigerant: R404A Refrigerant quantity: 2.50 kg ND max.: 22.5 bar g HD max.: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 14 A Testing chamber lighting: Halogen, 2 x 24 V / 50 W Feedthroughs available Operation via touch panel / controller Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Testing chamber lighting Side feedthroughs Shelves / Testing chamber equipment as shown in the pictures Documentation / Operating manual Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötsch VC³ 4018 Climate testing chamber Documentation / Operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful check The table or any other items not explicitly mentioned in the photos are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Hnjdpfoz Akcfjx Akrsu Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.