Used Esta Srf-K15 Fm for sale (2,012)

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter Pedpfx Ajtpui Ioi Tegu ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: good (used), Year of construction: 2016, Esta welding fume extraction system SRF K10 FM IFA W 3 230 Volt, max. 950 m³/h, with automatic filter cleaning, suction nozzle 3 meters. Pgsdey Uch Tepfx Ai Tou

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 33639, A very well-preserved welding fume extraction unit ESTA type: SRF p 10, serial no.: 33639, year of manufacture: 1998 Pgedpfx Aisyr Rpre Teu

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Pgjdpfx Aisyibg Tj Tsu Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Pgodpfx Aeylb Ixji Teu Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2000, condition: good (used), Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum-based, brand: ESTA Model: SRF P13 JET For welding, grinding, sandblasting, and all types of dry dust. Pjdsirt Amjpfx Ai Togu The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Fan power: 3 kW Capacity: 1850 m3/h Filtration area: 15 m2 Vacuum: 4300 Pa Inlet diameter: 2 x 160 mm Year of manufacture: 2000

Condition: used, Year of construction: 1987, volume capacity / length / mm Pgedpfx Ajyrt A Usi Tou height / mm

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Pgedpfjw Avl Usx Ai Teu

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Ready for use. Psdpfx Aou Hlppoi Tsgu

Condition: used, volume capacity / length / mm height / mm total power requirement / kW Psdpfowgi S Asx Ai Tsgu weight of the machine ca. / t required space / m

Condition: used, Year of construction: 2021, Motor power: 3kW, protection rating: IP54, max. air flow rate: 2800m³/h, number of filter elements: 2, filter area: 24m², dimensions: 1910mmx1040mmx2200mm, weight: 350kg. The machine was inspected by ESTA in 2021. Inspection by appointment possible. Pgedpe Aba R Tsfx Ai Teu

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Pgedpfxjzuwqts Ai Tou Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures. Pgsdpfoz Sm U Tjx Ai Tsu

Condition: used, Year of construction: 2015, operating hours: 2,500 h, On behalf of our client, we are selling a fully equipped and ready-to-use top-slewing tower crane. * Siemens Simatic/Sinamics HMI touch system * Tagline Master (2.2 tons) * CE certified * Self-erecting * Enclosed operator cabin with elevator * Electric with generator (in container) * Radio remote control * Emergency descent * Hydraulic unit Podjz D Ru Iopfx Ai Tegu * Hydraulic lifting cylinder * Intermediate platforms * Base plates * Spare parts container * Tool container ----* Jib length: max. 68.5 m * Load capacity up to max. 125 tons * Top-slewing cages, each 7.8 m * Year of manufacture: 2015 * Operating hours: 2500 hours ----NACELLE: Diameter: ¢4800, Clearance: 3500 mm, Height: 4937 mm ----FORCES AT GROUND LEVEL * Base forces: 1670 m (1098 m mast) * In operation: Wind speed 15 m/s * Out of operation: Wind speed 40 m/s ----Moments and forces: M (kNm): 27850 (in operation), 26800 (out of operation) * N (kN): 6580 (in operation), 5130 (out of operation) * a (kN): 120 (in operation), 410 (out of operation) * T (kNm): 800 (in operation), 0 (out of operation) * Deflection, mast (m): 1.500 (in operation), 0.850 (out of operation) * Mast inclination (degrees): 1.100 (in operation), 0.500 (out of operation) * Corner load (kN): 3000 (in operation), 2500 (out of operation) ----Errors and prior sale excepted.

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust Pjdpfx Aisx Upqhj Tsgu The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2014, filter area: 150 m², suction capacity: 15,000 m³/h, The WELDEX FT series of filtration towers has been specially designed for the efficient removal of welding fumes in production facilities. These units are primarily intended for extracting contaminated air during the welding of large or complex metal parts, where conventional fume extraction directly at the source is impractical. Fine particles are captured by M-class filter cartridges, and the filters are automatically cleaned during operation using a pulse jet of compressed air (pulse cleaning). The WELDEX FT filtration tower is positioned at the center of the workspace. Fume-laden ambient air is drawn in at the top of the unit from the surrounding area, filtered, and then returned to the hall draught-free through two side outlets. The three-section dust collection drawer gathers separated contaminants from both the pre-separator chamber and the filter compartment. Welding fume extraction for production halls (workplace ventilation systems) Ideal for all work areas where selective extraction is impractical: - Metal industry - Mechanical engineering - Automotive industry - Vehicle manufacturing - Aircraft construction - Shipbuilding - and many more High-performance welding fume extraction for manufacturing plants No need for ductwork installation Easy to install – ready for immediate use Durable, cleanable filter cartridges = low operating costs Efficient fume extraction using thermal lift from the welding process Compact design = minimal space required Flexible application = can be relocated at any time Brand: ESTA Model: WELDEX FT-150 Specifications: Motor power: 11 kW Capacity: up to 15,000 m3/h Vacuum: 2,000 Pa Filter surface area: 150 m2 Weight: 1,400 kg Year of manufacture: 2014 Dimensions: Width: 2.10 m x 1.40 m Height: 3.65 m Stock no.: 1031 Pgsdpfsxg Icksx Ai Teu

Condition: good (used), Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, Pgjdopxq Ugopfx Ai Tsu -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left Pgedpfx Asdqzbroi Tou 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg

Condition: used, Year of construction: 2006, suction capacity: 10,300 m³/h, negative pressure: 4,400 Pa, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum unit suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Brand: ESTA Model: DUSTEX F-126 The filter is cleaned by compressed air pulses during operation, ensuring high device efficiency. The fan is installed on the clean air side, minimizing the risk of explosion. Specifications: Max. airflow: 10,300 m³/h Max. negative pressure: 4,400 Pa Filtration surface area: 126 m² Cartridge filter elements: 6 pcs Motor power: 7.5 kW Inlet diameter: 315 mm Unit dimensions: Height: 3.70 m Width: 2.00 m x 1.35 m Psdpfx Aiex Hxycs Togu Base: 1.45 m x 1.02 m Stock number: 1095

Condition: good (used), Year of construction: 2017, machine/vehicle number: 17002702, Offer 25276 Extraction Filter System / Stationary Filter Unit with Wet Separator Technical Data: Pgedsx Upd Uspfx Ai Tju - suitable for moist, sticky dusts, metallic grinding - with heavy spark generation - single and multi-station extraction - volumetric flow approx. 5,150 m³/h - water capacity 390 l - drive power 400 V / 7.5 kW - required space W 1250 x H 3650 x D 1100 mm - weight approx. 550 kg

Year of construction: 2017, condition: excellent (used), Storage location: 2727 Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Serial number: 16002366 Podpfslt Uinox Ai Togu Volume flow: 700 m³/h Max. negative pressure: 1,100 Pa Connection diameter: 50 mm Features: mobile Accessories: see image, including laboratory extraction arm Connection: 0.55 kW, 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm (without hose)

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 emission standard Manual transmission Pgjdpfxez Nxqps Ai Tou Tridem axle configuration The 4th axle is a steering and lift axle Wheelbase: 3.80 m Length of loading platform: 6.80 m In good technical condition and ready for operation.

Condition: defective spare-parts repository (used), functionality: unexamined, machine/vehicle number: 611878000365, Year of construction: 2007, Included in the scope of delivery: 1x reach truck, defective Manufacturer: STILL Model: FM-12 I Total weight: 2,150 kg Rated load capacity: 1,200 kg Rated drive power: 6.0 kW Maximum battery weight: 788 kg Battery voltage: 48V Year of manufacture: 03/2007 Serial number: 611878000365 Maximum lifting height: approx. 5,870 mm Operating hours: 0.0 h Overall width: forks (outer) approx. 800 mm Fork length: approx. 800 mm Battery age: 2012 Outrigger depth: up to 630 mm Overall height: approx. 2,460 mm Overall width: approx. 1,250 mm Overall depth: approx. 1,700 mm Overall depth with forks retracted: approx. 1,900 mm Podpfx Aijzxrras Tjgu Overall depth with forks extended: approx. 2,520 mm Battery charger, used Manufacturer: Richter Gabelstapler Model: SE48V80A Overall width: approx. 500 mm Overall depth: approx. 400 mm Overall height: approx. 810 mm Note: The reach truck is now only used as a source of spare parts. Control unit is defective, and the battery is deeply discharged. Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, ESTA Spänesog-SB 8151 Chip Extractor Psdpoznibwefx Ai Tegu High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g., during metal or wood processing). Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amps): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2019, Year of production: 2019 Voltage: 400 V / 50 Hz Motor power: 2 x 4 kW Air volume: 15.000 m3/h Filter area: 160 m2/4 Max. pressure: 2800 Pa Pgedpfxovq Ncwe Ai Teu Size (L x w x H): 2060 x 1515 x 3310 Weight: 1200 kg