Used Esterer = Ewd S 71 for sale (71,096)

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER S 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Nlsdpfx Anoywh Hmegsh

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm Nljdow Eu Akspfx Angoh 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Nodpfxexw Ubnj Angelh

Condition: excellent (used), functionality: fully functional, Base plate for Esterer sash cutters type SS 71 or HD 71 with main shaft and bearings. Equipped with full and idle pulleys. Nlsdpfxoth Udmj Angeh

Condition: excellent (used), 1 saw frame in very good condition 710 mm frame width with 8 guide shoes in good condition Nlodpfx Anolni Uqegjh

Condition: new, pinion heads for gang saw complete with ball joint pins and red brass bushes, spare part number 23 a + b or 235254-01 Nodpfxstq Eq Rs Angjlh

Condition: used, Wide selection of used spare parts in good to very good condition for EWD Esterer HDE 71. Nodpfxezht Hwe Angolh Overhang plates, adjustment gearboxes for overhang adjustment, complete feed unit, saw frame, roller shafts with sprockets, hydraulic cylinders for roller lifting, chain housing, etc.

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Nedpezn Uv Hsfx Angelh Lightly used. Ideal for keeping spare parts in stock.

Condition: good (used), Saw frame, guide rails, connecting rods, feed rollers, new roller shafts, racks, new rack heads, roller lifting hydraulic unit, gang saw frame stand with overhang plates, gang saw flywheel assembly, tight pulley and free-running pulley with bushing and many more parts Nodpfx Aowhv Rnjngslh

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Njdpexw Uf Tsfx Angslh

Year of construction: 1990, condition: excellent (used), 1 unit of a mass balancer for reciprocating machinery. Nlsdpfxjfm Ev Ro Angoh Includes complete accessories and mounting parts. Used very little.

Condition: excellent (used), Spare parts for Esterer log carriages LSH 65, some in new condition, new and used. Flywheels, stanchions, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhanging parts. Saw frame, top and bottom, saw carriage with insertion brackets. Pulleys. Spare parts also available for Esterer log carriages SS 71. Nledoi T Egpjpfx Angjh

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Equipped with electrically driven spreading rollers. Also adjustable manually. Nljdjz D Exuepfx Angsh Electrical adjustment of the spreading jaws, also asymmetrical. Pressure rollers can be hydraulically extended and retracted. Heavy-duty spreading jaw blades and spring flaps.

Year of construction: 1994, condition: used, Edger line / automatic edger / double edger with measurement and automatic saw blade adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum pass-through width: 1000 mm Maximum cutting height: 120 mm 3 blades in total 2 blades adjustable Measurement system: Combimes with S-conveyor Nledpfx Anoyam Iaogjh with crosscut saw with Esterer ARS TR infeed with 2-lamella chip separator Can be fully refurbished upon customer request. The plant has already been dismantled and is immediately available. Location: Austria, near Leoben

Condition: excellent (used), 2 support legs for Esterer gate type EHD 30. Used for only 6 years. Support legs and spare parts are also available for other Esterer gate types. Nodpfeip Uf Uex Angolh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Nlsdex T Azwepfx Angsh Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Year of construction: 1979, operating hours: 10,968 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Werk-Nr. 8725, INFORMATION REGARDING SALES AND CONTRACT CONDITIONS: MACHINE CONDITION: This ESTERER frame saw, model LSH 65, was in impeccable operational use until three years ago and remains serviceable. The equipment includes both a stationary control panel in front of the saw frame and a mobile control panel on the tensioning carriage. A hydraulic tensioning device for adjusting the saw blades in horizontal and vertical directions is mounted on the frame. The electric motor drive with gearbox is included in the offer. HANDOVER AND PRICE: Handover will take place after full payment of the purchase price. The price is ex foundation and is payable on-site directly to the seller after conclusion of the contract and prior to dismantling. Nlsdjzgr Iqepfx Angjh WARRANTY: The seller assumes no warranty, neither before nor after handover of the machine – sold as seen. The buyer has no right of withdrawal. DISMANTLING: Complete dismantling, including lifting gear, tools, and transportation, is the responsibility of the buyer. Handover of the machine shall take place on-site. Any damage caused to the building during dismantling will be repaired by the buyer or charged separately. The purchase transaction will be mutually confirmed by means of a sales contract.

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Frame width 710 x 710 mm. Stroke 500 mm. Infinitely variable hydraulic feed. Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. Nlodpozz Iu Asfx Angeh From a small operation. Also interesting as a source of spare parts.

Condition: excellent (used), functionality: fully functional, Complete hydraulic feed unit for EWD Esterer creel type HDE. Nlodporrxtpjfx Angjh Very well maintained. Infinitely variable from 0 - 12m / min.

Condition: good (used), functionality: fully functional, Robust spiral conveyor with right-hand deflection. Length 8.80 m. Roller length 800 mm. Nljdpfx Anez Ixfcegjh Complete with drive unit.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1000466, For sale is a professional direct injection molding machine from leading manufacturer DESMA, model S712. This machine is ideally suited for the efficient series production of footwear with directly molded soles (direct injection molding). Areas of application & uses: Ideal for TPU - 200T clamping force Footwear industry: Production of safety shoes, work shoes, hiking boots, as well as leisure and shaft boots. Materials: Processing of polyurethane (PU), TPU, or PU combinations for sole production. Process: Direct injection molding of the sole material onto the upper. Equipment & features: Type / design: DESMA S712 rotary table machine / carousel machine with multiple stations. Molding head: Precision mixing head for accurate material metering and clean mixing. Control: Ergonomic control panel for central control of temperature, injection volume, and cycle times. Hydraulics & pneumatics: Robust clamping units for even pressure and burr-free sole edges. Safety: Integrated safety guards and light curtains according to industrial standards. Technical data (standard configuration): Nsdpfoz H Ibwex Angslh Manufacturer: DESMA Schuhmaschinen GmbH Model: S712 2003 expansion to 8 stations Application: Direct injection molding / sole injection molding Processable media: PU systems (polyol / isocyanate) Condition: Used, from current/former production

Condition: as good as new (ex-display), 7 pieces of guides suitable for the gang saw ESTERER HD 30 or EHD 30, absolutely as good as new because unused, 5 of the 7 guides are hollow body guides for cooling water flow Nlodpfxsigqqhe Angsh

Condition: used, Year of construction: 1976, Esterer LSH Sash Saw 1976 - Automatic cantilever adjustment Nledeyhduyjpfx Angeh - Hydraulic roller lifting - Swing frame - With templates - With magnetic holder - With Jansen saw tensioner - With Esterer Arta-C riving knife - With drive motor - With saw blades - With intermediate gear Clearance width: 650 mm Clearance height: 90–620 mm Stroke: 500 mm Feed speed: 0–8 m/min Feed power: 3.5 kW Pulleys: 900 mm Total weight: 5.4 t Fits the foundation of the Esterer LD65 sash saw. Has been stationary for around 15 years. Dismantled and stored approx. 3 years ago. Annual cut approximately 3,000 solid cubic meters. Very good condition – immediately available – fully functional Location: Austria, near Graz

Condition: used, Esterer Linck debarking machine, model ELC ER 72 N 12 SR. Suitable for trunk diameters of 10 to 75 cm. Feed rate up to 70 m/min. 12 infeed and outfeed rollers. Minimum wood length: 1.80 m. Nodpfjz Dvdzjx Angslh Debarking rotor with 6 knives. Hydraulically pre-tensioned. Main motor: 55 kW. Feed motor: 7.5 kW with 2 speeds. Also ideal as a replacement machine, as many new parts have been installed in recent years.

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 Acu Rite digital readout Machine lamp Njdpfxovq Ibxs Angolh Coolant tank Longitudinal stop Rear chip guard Chuck guard