Used Ewd Wd Gdz Ge 76 for sale (11,496)

Condition: good (used), 2 pieces of frame stands. Oscillating shaft and overhung shaft. 2 pieces of split lower frame rollers. Shafts and bearings for rollers. Ljdjwwr Eaopfx Amzshn Guide bracket, etc.

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Ljdeykr Aqopfx Amzohn Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: good (used), Trak do drewna EWD GDZGE71 przeswit 710mm skok ramy 600mm wozek podawczy h38 urzadzenie rozdzielcze Lodpfxjvplyvs Amzohn

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades Ljdeqpdi Uspfx Amzshn with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: good (used), functionality: fully functional, Robust spiral conveyor with right-hand deflection. Length 8.80 m. Roller length 800 mm. Complete with drive unit. Lhodpfxez Ixfcs Amzen

Year of construction: 1999, condition: excellent (used), functionality: fully functional, EWD gang saw line with edger and stacking system Complete cutting line from gang saw infeed to finished stacked lumber. The system includes automatic gang saw infeed, cutting with a high-performance EWD gang saw, material transfer, automatic edger, and a fully automatic stacking and packaging system. Technical specifications Cutting lengths: 2,500–6,000 mm Frame width: 710 mm Clearance height: 700 mm Saw stroke: 600 mm Gang saw speed: up to 320 rpm EWD H38 gang saw infeed EWD high-performance gang saw, type GDZ/GE 600 Main drive: 160 kW Hydraulic blade tensioning for up to 25 saw blades Lsdpszvyn Dsfx Amzjhn Heckel extraction and conveying technology Automatic edger, type FR 9 WD, with two movable sawing units Cross-cutting system as well as centering and feed system with pre-measuring Two fully automatic stacking and packaging systems Output up to 24 boards per minute per stacking system Automatic layer formation, spacer insertion, and package transfer

Condition: used, Saw frame Wurster Dietz GDZGE76 passage 760mm stroke 600 hydraulic saw chipper carriage fully automatic splitting wedge cross-cut saw roller conveyor Ljdpfx Amev Rg Epezohn

Condition: good (used), Year of construction: 2009, functionality: fully functional, Description HI TEC - TUNEL WASHING MACHINE FOR AUTOMOTIVE SERIAL WASHING COMPLETE STAINLESS STEEEL Lodpovk Evgsfx Amzohn NEW PURCHASE PRICE: 90.000 EUR CAN BE USED FOR METAL PARTS CLEANING USED INSIDE AUTOMOTIVE METAL PROCESSING TURNING PARTS CLEANING MACHINE IS DISMATLED, CLEANED - READY TO GO. FOR CUSTOMER WE ORGANIZE TRANSPORT AS WELL DOCUMENTATION INCLUDED

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Key technical data Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Lhsdpfxozvyl As Amzjn Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. The restacking unit can be purchased separately if required.

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm Lhedpfxez I T Rmj Amzjn max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, CNC Universal – Machining Center DECKEL MAHO DMU 40 eVo NEW DMG Design With Heidenhain iTNC 530 HSCI control system Year of manufacture: 2012 Lodpfx Ao Ad Up Nsmzohn Travel distances: X 400 Y 400 Z 375 Speed range: 20 – 18,000 rpm, stepless With the following accessories: NC rotary table 450 mm x 400 mm incl. table cooling 30-position tool changer with dual gripper 3D measuring probe Renishaw PP 60 optical Electronic handwheel Operating mode 4 Heidenhain table probe TD 110 (length measurement) IKZ 40 bar with paper band filter Chip conveyor Machine bed flushing Active cooler for control cabinet Spindle cooling: water circulation cooling Direct path measuring system Flushing gun for chip removal Rotoclear Oil mist extraction 3-piece height-adjustable machine feet Operating manuals Signal light, 4 colors

Year of construction: 2006, condition: used, functionality: fully functional, We present an Automatic drawer slide insertion line of 3 machines and robot (currently in production): BLA - B41, manufactured 2006/2007 (Sweden) BLA - B28, manufactured 2006 (Sweden) Screwdriver 3RL, manufactured 2018 (Lithuania) Robot TECHNICAL SPECIFICATIONS Inserting of Drawer Slides Fitting machine BLA-B41 – pos. 1 Fitting machine in pass-through outfit, equipped with positioning stop, designed for automatic screwing of drawer slides. The fitting machine is designed for following sizes of material: Deep: 300–600 mm, servocontrolled adjustment Height: 400–1500 mm, servocontrolled adjustment Thickness: 16 mm Dimensions Machine length: 4100 mm Pass-through height: 900 mm Screwdriver equipment Screwdriver beams, 2 units, each equipped with 2 screwdrivers and corresponding screw feeders for Ø6.3x13 screws. A suiting screw is the type 84 FSX Magazine units 2 magazine units designed for left drawer slide 2 magazine units designed for right drawer slide · Each magazine contains approximately 40 drawer slides. · The length of the slides are 450 mm and the width 21.5 mm. Buffer conveyor TPB – pos. 2 Driven roller conveyor Total length: 2150 mm Other specifications are the same as for pos. 3 above. Lhsdjy T Nfijpfx Amzjn Buffer conveyor TPB – pos. 3 Driven roller conveyor Total length: 2450 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.78 m/sec. at 50 Hz (frequency controlled) Height: 900 mm Returning Conveyor System TPT-US – pos. 4 Sideway section with four belts Speed: 0.5 m/sec. at 50 Hz (frequency controlled) Driven roller conveyor Total length: 8900 mm Roll length: 600 mm (620 mm inside conveyor frame) Roll pitch: 150 mm Roll type: Ø50 mm steel, coated with thermoplastic rubber Speed: 0.50 m/sec. at 50 Hz Height: 900 mm Additional specifications Sound pressure level Lower than 70 dB(A) Connection facts electrical With reference to the electrical drawings Connection facts pneumatic 0.63 MPa (6.3 bar), ½”

Condition: used, Year of construction: 2001, Suitable for automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters, etc. using the wire electro-erosion process. Accesories: Total enclosure, Mist extractor Probe, Machine lamp, Automatic central lubrication, Coolant system dielectric fluid Fire extinguishing system Measuring mandrel Alphanumeric keyboard cutter outer diameter max: 250 mm cutting length max.: 200 mm shank tool diameter: 10 - 250 mm Ledpfx Ajyzm Iwemzehn cutting length: 200 mm Outside diameter of disc-shaped tools max.: 250 mm tool weight max.: 20 kg X-axis travel: 220 mm Y-axis travel: 300 mm W axis travel: 200 mm A-axis rotation range: 60 ° A-axis taper: ISO 40 E-axis swivel range: 120 ° number of revolutions: 80 - 2000 rpm. Dimensions L x W x H: 2235x2630x2130mm mass: approx. 4500 kg Connected load approx.: 400V / 50Hz / 4.5KW colour: turquoise RAL 5021/grey RAL 9002

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg Lhjdpfxjx R Em De Amzsn number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Debarking Block conveyor Ledpfx Amsz Tfa Sezshn EWD ZE infeed table Microtec 3D measurement Spaner FZ3 Roller unit EWD EVW Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: good (used), Year of construction: 1985, Saw frame Wurster Dietz GDZGE71 throat 710mm stroke 600mm hydraulic saw clamp fully hydraulic splitting carriage splitting wedge cross-cut station with accessories Ljdpfxevg Igto Amzshn

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm Ledpfxoym Dz Rj Amzohn number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: used, Year of construction: 2009, operating hours: 9,000 h, Equipment: all wheel drive, * TEREX TA30 Gen 7 dumper * Year of manufacture: 2009 * 9,000 hours * 261 kW Cummins engine, 6 cylinders * 6 x 6 all-wheel drive * 13.8 m³ * Payload: 28,000 kg * Unladen weight: 22,502 kg * Camera * Air conditioning * Body heating prepared Lhodpfx Ajy H T Dvomzen * Central lubrication system

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Lhjdpfxox T Azwj Amzsn Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: good (used), Trak do drewna Wurster Dietz GDZGE71 przeswit 710mm skok ramy 600mm silnik 90kw wozek podawczy wozek pomocniczy urzadzenie rozdzielcze rozsuwane pily napinanie hydrauliczne Lsdpfx Amsvpdfkszshn

Condition: ready for operation (used), Frame saw Wurster Dietz GDZGE 71, passage 710 mm, stroke 500, carriage, auxiliary carriage, splitting wedge Lhedpfxow In U Do Amzsn

Condition: new, 2 pieces = 1 set NSK AXIAL-RADIAL THRUST BALL BEARING Lsdpfx Amszh E Igjzshn 76.2x110x16 76 TAC 110 A DB C11 PN7 A PRESSURE ANGLE 60° INSTALLATION IN O-ARRANGEMENT

Condition: excellent (used), functionality: fully functional, Complete sawing frame for EWD Esterer gate, type HDN 600 or HDS 600 with width adjustment. Includes Jansen double-yoke tensioner. Lhsdpfjzn Uv Hox Amzjn Lightly used. Ideal for keeping spare parts in stock.

Condition: excellent (used), functionality: fully functional, Well-maintained W&D gate-type press, model GXW 71 VH. Frame width 710 x 710 mm. Stroke 500 mm. Infinitely variable hydraulic feed. Lhsdjzz Iu Aopfx Amzjn Hydraulic cylinder lift with adjustable cylinder pressure. Drive. Saw attachment. Electric remote control. Clamping carriage and wedge with electric adjustment. From a small operation. Also interesting as a source of spare parts.

Year of construction: 1997, condition: used, EWD DK90 T2L2 Combination Saw Year of manufacture: 1997 Cutting height: 15 mm - 120 mm Cutting width: 80 mm - 750 mm Lhodpfx Amez Niviozon 4 moving blades Feed rate: 15-160 m/min 75 kW Microtec visualization system Cross conveyor - inclined conveyor - infeed table with miter saw - machine - roller conveyor with chip separator