Used Exner Ex 20 for sale (32,939)

Condition: used, Year of construction: 1970, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden Kdjdpfx Aevxltbsfdsk

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Table size: 480 x 350 mm Kdodjxbf Ndjpfx Afdsk Maximum tool height: 230 mm

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s Kdedpfoyz Dtdjx Afdsk - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Ksdeyvgrhopfx Afdsdk Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm Kdedpfx Aetqqwuefdok table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l Ksdpfx Afjyx Imvsdodk power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation No foundation pit necessary

Condition: used, Year of construction: 1991, pressure 150 t distance between columns 300 mm stroke 180 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 570x180 / 300x410 mm table height over floor 875 mm side window 180 mm ram surface 180 mm speed down 250 mm/s speed up 160 mm/s working speed 6 - 12 mm/s Kdsdsvuuiwspfx Afdjk oil volume 250 l power requirement 11,0 kW weight 2,4 t dimensions (WxDxH) 1,3 x 1,3 x 2,4 m year of manufacture 1972 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press Kdsdpfouw S A Dox Afdek NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm mech. depth stop

Condition: new, Year of construction: 2024, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, installation height: 400 mm, Equipment: safety light barrier, EXNER hydraulic double column press EX SLL 40 new machines year of construction 2024 Kjdpsuv Hm Isfx Afdsdk pressing force: 400 kN Installation height: 400/450 mm stroke: 250 mm Table (width) 700 mm Table (depth) 450 mm

Condition: like new (used), Year of construction: 2017, operating hours: 214 h, load capacity: 2,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, Manufacturer + model: LINDE L 20 as (1173) * EX * Proplan 2GD / Zone 1-21-22 * Mast: 3F4000 ID: 26065.0442 Category: Demo Lowered height: 1920 mm Lifting height: 4000 mm Capacity: 2000 kg Year: 2018 Operating hours: 214 hours Battery: Completely NEW * 24v / 315ah * Year: 2025 Kdedpfsy Dh N Usx Afdek Options: * EX * Proplan !!!!! System / Certificate = EPS 16 ATEX 1137 X Gas Group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temperature class = T4 ===== Dust Group = IIIC Type = Cat 2D (approved for ZONE 21 and 22) Temperature class = T 120°C ===== Very UNIQUE explosion-protected ATEX “DEMO” WIDE TRACK - with FREELY ADJUSTABLE fork arms - also fitted with ADJUSTABLE support legs POWER STEERING Complete LIKE NEW!!

Condition: like new (used), Year of construction: 2020, operating hours: 2,063 h, load capacity: 2,000 kg, lifting height: 5,700 mm, fuel type: electric, mast type: triplex, construction height: 2,460 mm, Manufacturer & model: STILL RX 20 - 20 L *EX* Miretti 2G / Zone 1* Mast: 3F5700 ID: 26051.4376 Category: Used Mast: 3F5700 Forks: 1150 mm Lowered height: 2460 mm Lifting height: 5700 mm Capacity: 2000 kg Year: 2020 Kdjdpfx Ajy Dh I Djfdjk Hours: 2061 Battery: 48V / 630Ah Options: *EX* MIRETTI - E 11806 System / Certificate = TUV CY 16 ATEX 0205734 Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temp class = T4 Equipped with: - Joystick forward / reverse control - Full cabin - Complete road lighting - Additional spotlights - Flashing beacon - Triplex - FFL mast - Spreader / S.s. - Blue spot In truly LIKE NEW condition!

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F4650 ID: 26057.5931 Category: Used Mast: 3F4650 Lowered height: 2130 mm Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Operating hours: 6472 hours Battery: Completely NEW * 48v / 625ah * Manufactured 02/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Kjdpey Dh H Tjfx Afdodk Type = Cat 2G (approved for ZONE 1) Gas group = IIB Temperature class = T4 Type = Cat 2D (approved for ZONE 21 - Dust) Dust group = IIIB Temperature class = T 135°C - IP 6X Equipped with CONTAINER specs!! - Joystick control forward/reverse - Triplex FFL mast - Front working light - Flash beacon - Blue spot safety light

Condition: like new (used), Year of construction: 2016, operating hours: 930 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer & model: LINDE T 20 * EX * Proplan 3GD / Zone 2 - 22 ID: 25050.8953 Category: Demo Forks: 1150 x 560 mm Load capacity: 2,000 kg Year: 2016 Operating hours: 930 hours Battery: Completely NEW * 24v / 230ah * Year 2025 Options: Special construction with hydraulically tiltable forks! Ideal for emptying IBC containers * EX * Proplan! Kdjdpfxoyy Axvj Afdjk System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: like new (used), Year of construction: 2016, operating hours: 708 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8428 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 708 hours Battery: Completely NEW * 24v / 230Ah * Year 2025 Ksdpfeyy Avhjx Afdedk Options: Special build! With hydraulically tilting forks! Ideal for example for emptying IBCs * EX * Proplan! System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temp class = T4 Type = Cat 3D (approved for ZONE 22 – Dust) Dust group = IIIB Temp class = T 135°C

Condition: like new (used), Year of construction: 2016, operating hours: 1,176 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: LINDE T 20 * EX * Proplan 3GD / Zone 2 & 22 ID: 25070.8807 Category: Demo Forks: 1150 x 560 mm Capacity: 2000 kg Year: 2016 Hours: 1176 hours Battery: Completely NEW * 24V / 230Ah * Year 2025 Options: Special build! With hydraulically tilting forks! For example, for emptying IBCs *EX* Proplan! Ksdpeyy Avbefx Afdjdk System = ATEX 14 Proplan 3002 X Type = Cat 3G (approved for ZONE 2) Gas group = IIB Temperature class = T4 Type = Cat 3D (approved for ZONE 22 – dust) Gas group = IIIB Temperature class = T 135°C

Condition: like new (used), Year of construction: 2017, operating hours: 3,928 h, load capacity: 2,000 kg, lifting height: 6,850 mm, fuel type: electric, mast type: triplex, construction height: 2,970 mm, Brand + Model: LINDE R 20 - * EX * Mitrex 3G / Zone 2 Version: 3F6850 Identification Number: 24122.5213 Category: Used Mast: 3F6850 Ksdpfxsyy Anws Afdjdk Overall Height: 2970 mm Lift Height: 6850 mm Lifting Capacity: 2000 kg Year of Manufacture: 27 Operating Hours: 3928 hours Capacity: Complete NEW * 48v/775ah * Year 2026 Options: * EX * Mitrex !!!!! System = ATEX 24 / 34 / EU Gas Group = IIB Type 3G - Ex d IIB T3 GB (approved for Zone 2) Temperature Class = T3 (200°C)

Condition: used, maximum load weight: 35,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 03/2026, Year of construction: 2018, Equipment: ABS, * Van Hool 3-axle container chassis type: A3002 * Lift axle * Air suspension * BPW axles * Disc brakes * 20ft * EBS * ABS Ksdpsxq I Nxsfx Afdodk * ADR FL AT EXII EXIII * HU 03/26 - SP 09/26 * 3 units available

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. Kjdpfx Ajiv H Ekefdjdk We can also provide machines in other dimensions.

Condition: good (used), CNC Lathe TAKAMAZ EX 20 / Fanuc 15 TF - Control: FANUC 15 TF - Max. turning diameter: 260 mm - Turning length: approx. 500 mm - Bar capacity: 42 mm - Spindle speeds: 40 - 4000 rpm - Spindle nose: A2-6 - Tool positions (stations): 12-fold / direct mount Kdodpfx Asyiddnsfdok - Tool measurement (Tooleye) - Parts catcher - Tailstock - Collet chuck: 173 E - Spindle motor: 7.5 kW Dimensions (LxWxH): 2.6 x 2 x 1.8 meters / Weight: 2,800 kg Errors and omissions excepted.

Condition: used, Year of construction: 1989, machine/vehicle number: 10131, functionality: fully functional, Manufacturer: Maschinenfabrik Exner GmbH & Co. KG Model: EEX 300 SB-ZR Machine No.: 10131 Year of manufacture: 1989 Press force: 3,000 kN (300 t) Drive power: 80 kW Overrun distance: 36 mm Overrun time: 103 ms Kodpfxjwr Um Aj Afdodk Hydraulic oil capacity: approx. 2,400 liters Total weight: approx. 47 tons Condition: inspected, videos can be provided upon request. Location: 59227, Ahlen Disassembly and transport to be arranged by the buyer.

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm Kdsdevut N Nspfx Afdsk permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, NEW EXNER C-frame press EEX SLL 40 Standard Line LIGHT Kodpfjw Nx Nhsx Afdedk Year of manufacture: 2025 Pressing force: 400 kN Installation height: 400/450 mm Stroke: 250 mm Table (width): 700 mm Table (depth): 450 mm Throat depth: 230 mm

Condition: new, Year of construction: 2024, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, EXNER hydraulic single-column press NEW Series EEX SL 40 - Pressing force: 400 kN Kdodpfx Afet D Ah Asdjk mech. depth stop Control: Siemens S7 - 1500 Installation height: 400 mm Stroke: 250 mm Tables: 700 x 450 mm

Condition: ready for operation (used), Year of construction: 1978, machine/vehicle number: 3073, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, Machine recovered from the insolvency of an automotive supplier - machines are still in operation! Rebuilt in 2008! Kdedpowhdm Defx Afdok TECHNICAL DETAILS Press force: 200 t Max. stroke length: 180 mm Control: Two-hand operation Further information according to the manufacturer - without guarantee Front column clearance: 420 mm Side column clearance: 220 mm Table width: 830 mm Table depth: 530 mm Machine dimensions: 1.3 x 1.5 x 2.7 m

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t Kdsdpfst Hw Dwex Afdsk dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration