Used Fasti 1020M X 1,0 for sale (61,425)

Condition: new, sheet width 1000 mm plate thickness 1,0 mm distance between columns 1030 mm daylight opening 80 mm 135 ° Hjdpfezhn Uisx Ab Tjt total power requirement Handbetrieben weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,8 x 1,2 m

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. Hsdpozl A Rasfx Ab Tot The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, 4 mm bending capacity, manual operation with a large counterweight, large protective housing, additional bending tools. Hjdpjzr Nrqefx Ab Tst

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Any warranty is excluded. Hedpfxezibtns Ab Tot We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm Hjdpfegnc H Dox Ab Tjt coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers Hodpfx Asy Ezzyjb Tjt - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Hsdpfx Aeum Ttzeb Tjt Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), The blades are sharp and have seen little use. 1 pack / 3 saw blades Hedpjzg Ay Djfx Ab Tet Application: Automatic bending machine / Lisec, BSV-45, etc. Diameter: 200 mm Weight: 566 g Condition: good, second-hand

Condition: new, table length 2000 mm Hsdpfx Abefnxxue Tjt table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,73 t dimensions 2,0 x 1,0 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table length 2000 mm Hedogarhkspfx Ab Tjt table width 1000 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,38 t dimensions 2,0 x 1,0 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 2000 mm table width 1000 mm Hjdpfegazmcex Ab Tet table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,74 t dimensions 2,0 x 1,0 x 0,9 m Product description - High quality steel S355J2+N + plasma nitriding - Material thickness approx. 17 – 19 mm - Bore Ø 22 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Height of side panel 150 mm - Hole spacing in side cheeks 50 mm - Including scaling on the surface - Construction reinforced with ribs - Grid lines enable precise setups - Special equipment for welding tables is available on request.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t Hsdpfx Asgazl Ujb Tot dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, sheet width 915 mm plate thickness 1,0 mm distance between columns 920 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 96 Kg dimensions of the machine ca. 1170 x 400 x 480 m Segment-bending machine Hjdpfjupxf Ijx Ab Tst Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: new, sheet width 610 mm plate thickness 1,0 mm distance between columns 620 mm diameter of upper rolls 38 mm total power requirement Handbetrieben weight of the machine ca. 40 Kg dimensions of the machine ca. 950 x 270 x 360 mm Sheet bending machine with: Hsdjupxi Tspfx Ab Tet - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Hodpfx Aex U Dwvob Tjt

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven Hodpfx Aboywzlpo Tet -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: like new (used), FASTI Type 63x1.5 Beading Machine / Like new, almost unused Hjdjzivikopfx Ab Tjt -CE marking -Upper beading roller, hydraulically adjustable -Control panel -Various beading tools -Hydraulic unit -Documentation Dimensions: L x W x H / Weight 1200 kg Errors and omissions excepted.

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Hsdpfx Asy Iha Ueb Tet Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt incl. 1 pair of rolls Forward/reverse operation via foot switch

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm - GS certification Hedpfezb Emdsx Ab Tst - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Hsdpfxoza D Eio Ab Tot Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: like new (used), Max. Biegelänge: 1020 mm Hjdpfx Aed Hx Icjb Tjt Max. Blechstärke: 1,2 mm Stahl

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers Hsdpfx Aoit Eunob Tst -Conveyor belt rollers: Transport rollers with plastic attachment, diameter 65/89 mm -Transport width: 1020 mm -Quantity: 10x transport rollers available Price: per piece -Overall dimensions: Ø 90 x 1045 mm -Weight: 7.2 kg/piece / 1 pc. MA9018 6.6 kg

Condition: good (used), Windscreen, windscreen for forklifts, forklift windscreen Hsdozg T Eqopfx Ab Tet -Manufacturer: Toyota, windshield for forklifts with frame and wiper blades -Image/Dimensions: see photos -Transport dimensions: 1040/1020/H130 mm -Weight: 22 kg

Condition: used, mileage: 1,000 km, power: 375 kW (509.86 HP), first registration: 10/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #391 Mercedes-Benz AROCS 3545 L 8x4 B13 Kroll K 1.0-18.0 /36PESP, Suction Unit This Mercedes-Benz Arocs 3545 L 8x4 is equipped with a powerful KROLL suction/pressure tank superstructure of ADR class L4BH. With a tank capacity of 18,000 liters, VacuStar W1600, Speck P52/100-150, and hydraulic tank equipment for 18,000 L, this vehicle is ideal for demanding industrial, sewer, and emulsion suction applications. A robust suction system for professional operations. Superstructure * Manufacturer: KROLL * Tank Material: S355J2+N (St 52.3) * ADR Suction/Pressure Tank K 1.0–18.0 / 36PESP * Tank Volume: 18,000 L (air volume) * Sludge Volume: 15,000 L * Emulsion Chamber: 3,000 L * Rinse Water Chamber: 1,000 L, non-pressurised * Discharge via robust ejection piston Vacuum System * CVS VacuStar W1600 – approx. 1,550 m³/h at 400 mbar * Approx. 30 m DN80 suction hose mounted on the tank lid, can be fully cleaned through High-Pressure System * Speck P52/100-150 – 100 L/min at 400 bar * Small hydraulic HD hose reel for 60 m DN13 * Equipped with approx. 60 m cleaning hose DN13 Special Features * ADR L4BH, incl. EX/II, EX/III & AT * Remote-controlled suction inlet for pre-chamber DN100 * Manhole DN500 (left side) * High-pressure gun * Soundproofing enclosure left and right in front of the pumps * Removable, swiveling halogen work lights * LED perimeter lighting * Radio remote control (including 2 batteries) * Tiltable scrap box * Reversing camera * Ladder with bracket and anchor points * Advertising boards left and right on the tank Technical Data * Gross vehicle weight: 32,000 kg * Length: 10,700 mm * Height: 3,800 mm Hsdex Egx Uopfx Ab Tot * Width: 2,550 mm * Wheelbase: 3,900 mm Conclusion A high-performance Mercedes-Benz Arocs 3545 L 8x4 with large 18,000 L KROLL suction body, VacuStar W1600 and Speck P52 high-pressure system. Ideal for industrial, sewer, and emulsion suction projects requiring high durability and reliable technology. For further detailed information and pictures, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is made exclusively on our general terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 17,255 km, power: 335 kW (455.47 HP), first registration: 10/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #365 MB ACTROS 2546 6x2/ Kroll ADR Suction Vehicle, K 1.0 - 13.5 / 36 PESP Body KROLL * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5/36 PESP * 14,500 liter tank capacity (air volume) * 10,000 liter sludge volume | 3,500 liter emulsion chamber * 1,000 liter rinse water volume (non-pressurized) * Discharge with sliding piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on driver’s cab Hodjxa T Ryepfx Ab Tst * Reversing camera * Navigation system * Air conditioning * Coolbox Vacuum system CVS VacuStar W1300, approx. 1,200 m³/h at 400 mBar * Suction hose cassette with telescopic boom and 20m DN100 High-pressure system Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60m DN 13 * Approx. 60m rinse hose DN 13 Special features ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Remote-controlled suction connection pre-piston chamber DN100 * Manhole DN500 on left side * HP lance * Noise protection cladding for the pumps left and right * LED environment lighting * Remote control with two batteries * Tiltable debris container * Reversing camera * Ladder with bracket and anchor points * Advertising board on left and right of tank Technical Data GVW 26,000 KG * Length: 10,700 mm * Height: 3,800 mm * Width: 2,550 mm * Wheelbase: 3,900 mm Optional Equipment: Axle load – measuring device, front axle load 9.0 t, audio system: digital radio DAB / DAB+, Equipment package: ADR, Right exterior mirror with shunting position, 220 Ah battery, brake connections standard and DuoMatic, interactive multimedia cockpit, electrical preparation in cab 24V / 100 A, driver assistance system: high beam assistant and cornering light, suspension: front springs 9.0 t, 3-leaf, front windshield tinted with band filter, hazardous goods version ADR type FL, 12-speed transmission - Type: G 211-12, 3-piece fender, 3-piece fender with splash guard, fuel tank: 510 L aluminum, left, cool box/cooler, 2-cylinder air compressor, reinforced engine brake, steered trailing axle 9 t, liftable, double PTO MB 123-11b/1c, programmable special module, wheelbase variant 4300 mm, frame overhang 1650 mm, rain sensor, acoustic reversing alarm and warning beacon (external warning signal), additional remote control key (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver’s seat velour, cab seats: both-sided armrests passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver's seat, exterior sun visor, steel rims 11.75x22.5 (on front axle), socket 24V / 25A in passenger footwell, additional socket 24V in passenger footwell, steep shoulder rims 11.75x22.5 (on trailing axle, reinforced), preparation for 4 environment cameras (display on vehicle monitor), preparation for additional headlights, seat belt warning device passenger, seat belt warning devices, transmission oil cooler For further details and/or pictures, please contact us directly. You will find a large selection of other vehicles for BUYING or RENTING at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively...