Used Fasti 2055-10-2 for sale (90,278)

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Oberwange swivelable Bending angle adjustable via potentiometer Lift height preselectable via scale Manual and automatic bending mode possible Nlsdpfxjq T Ud Se Abzsd Weight: approx. 650 kg

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Nlsdpozh Ey Nsfx Abzed Total weight: approx. 0.5 tons Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Nodpfxowb Efzj Abzold Max. round diameter: 1000 mm Motor drive via footswitch Good condition

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper beam adjustment via foot switch Nledpfxsf Nwmze Abzod

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip Nodpfeu Rimmjx Abzjld - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Nlodpfx Ajzibtnjbzjd Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, functionality: fully functional, Year of construction: 1969, machine/vehicle number: 506/10/2,5, control type: CNC control, degree of automation: manual, actuation type: hydraulic, working width: 1,030 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, control voltage: 220 V, Used Fasti guillotine shear, model 506/10/2.5, year of manufacture 1969 Nlodpfxjy Hhiaj Abzsd

Condition: used, Max. bending length: 1020 mm Nljdpfx Aeyyl Nkjbzed Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Nlodpeyyl Nqjfx Abzed Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Nlodjyrrg Sopfx Abzsd Max. sheet thickness: 1.5 mm steel Weight: approx. 300 kg

Condition: new, sheet width 1000 mm plate thickness 1,0 mm distance between columns 1030 mm daylight opening 80 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,15 t dimensions of the machine ca. 1,3 x 0,8 x 1,2 m Njdpfx Abjzhn Uiszsld

Condition: like new (used), Max. Biegelänge: 1020 mm Max. Blechstärke: 1,2 mm Stahl Nledjd Hx Icepfx Abzsd

Condition: new, Year of construction: 2020, Model: KPZ-2 Type: Enclosed Working dimensions: 900 W x 1300 H x 900 D Nedpfeb Al Sbox Abzeld External dimensions: 980 W x 2100 H x 1600 D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter area: 22.5 m² Fan: Aluminum Fan noise level: 74 dBa Air flow: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request.

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Top roller diameter: 200 mm Right and left rotation via foot switch Njdpfxsxwyfre Abzjld Safety rope pull switch Conical rounding possible Motorized rear roller delivery Lower roller adjustment via handwheel with position indicator Weight: approx. 4,500 kg

Condition: used, Max. bending length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via limit switch Manual backgauge Nlodpfxeudqd Rj Abzjd Weight: approx. 1000 kg

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Nljdoum Ttzopfx Abzed Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 1995, Fasti 3-roll calender Main features: Length 1860 Maximum sheet thickness: 0.75 mm Nsdsf Slq Sepfx Abzsld Upper roller diameter: 40 mm Several jigs for LED ceiling lights

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Nljdszl Dngopfx Abzjd Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm coil weight: 7,5 t mandrel Ø: 508/610 mm Nljdognc H Dopfx Abzjd

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual rear stop up to 500 mm Side stops and table extensions knife sharpened Nsdpfx Aeukhnnebzold 1900 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Nlodpfov Ivn Isx Abzjd Weight approx. 480 kg + 130 kg lighting module

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Nsdpfx Abeyhqhtjzsld Weight: approx. 3000 kg

Condition: excellent (used), Year of construction: 2020, Powerful hacker or shredder with 45 kW motor, also suitable for plastic. Rotor width: 1000 mm, rotor diameter: 360 mm, approximately 50–60 blades on the rotor. Inclined conveyor belt with magnetic roller available separately. Nodpfew Tdudox Abzold

Condition: used, Year of construction: 1994, machine/vehicle number: GA24, Used ROBINO & GALANDRINO Wirehooder record 10-2Technical Specifications & Performance DataThis Automatic Wirehooder is a compact, high-performance wirehood applicator designed for sparkling wine and premium beverage closures. Built for reliable operation on glass bottles, it delivers precise wirehood positioning and twisting for consistent, secure muselet application at industrial speeds.Machine type: Automatic Wirehooder (wirehood/muselet applicator)Model: Record 10/2Year of manufacture: 1994Refurbishment: Overhauled in 2017Production speed: 10,000 bphContainer material: Glass bottlesInfeed direction: ClockwiseWirehood magazine: High-capacity, long-autonomy designSupported wirehood styles: Collio, Collio light, Collina, Lia, Sile, Extra L, Valdobbiadene, Elegance, Artù, Piave, Monterossa, Cru, Magnum CollioAdvanced Automation & Control SystemsEngineered for stable, repeatable operation, this wirehooder features automated feeding and consistent torque application to protect cork integrity while ensuring firm cage tightening. The long-autonomy magazine reduces manual replenishment for improved uptime on a used bottling line or integrated second hand packaging cell. Operator-friendly controls support quick setup and process monitoring for efficient beverage production.Automated wirehood feeding with alignment and controlled twist applicationHigh-capacity magazine to extend runtime between reloadsOperator controls for speed and format parametersStandard safety interlocks and emergency stop circuitsProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of a corking machine on glass bottling lines. It can function as a standalone module or as part of a synchronized industrial packaging line with upstream and downstream conveyors, accumulation, and inspection systems.Inline or standalone operation with conveyor interfacesDesigned for glass bottle handling in sparkling applicationsFormat changeover kits support various wirehood styles listed aboveSuitable for integration into complete bottling and beverage production linesMachine Condition & Maintenance HistoryThe unit was manufactured in 1994 and underwent a refurbishment in 2017, providing renewed reliability of key components and alignment systems. It is presented in good working order and ready for operation, ideal for facilities seeking robust second hand bottling equipment with proven performance.Operational Performance & VersatilityOptimized for sparkling closures, the machine handles a broad range of wirehood designs without compromising on application quality. Its high-speed performance supports commercial throughputs, while the magazine capacity helps maintain continuous operation and minimize changeover interruptions.Consistent cage placement and twist control for secure closureWide compatibility with premium wirehood styles for different brand aestheti... Nodpszmpzujfx Abzsld

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 12/2011, loading space length: 10,680 mm, loading space width: 2,490 mm, loading space height: 2,500 mm, total length: 10,860 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 7,680 mm, color: white, Year of construction: 2011, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle: Max. axle load: 10000 kg; Steering; Tyre profile left: 75%; Tyre profile right: 75% Nedpfx Abozku Smezold Weights Empty weight: 7.040 kg Carrying capacity: 13.960 kg GVW: 21.000 kg Functional Tail lift: Dhollandia DHLM.20, tail lift, 1500 kg Make of bodywork: J Stam Carrosserie Plywood Box Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL