Used Faymonville Multi 6 Asser Extendable Semi Dieplader/Tieflad... for sale (59,153)

Condition: good (used), first registration: 03/2016, total length: 15,450 mm, total width: 2,740 mm, total height: 950 mm, wheelbase: 12,660 mm, color: grey, Year of construction: 2016, Unladen weight: 18,900 kg Payload: 78,100 kg Gross vehicle weight (GVW): 97,000 kg Height of the loading platform: 95 cm Extendable superstructure: Yes Technical condition: good Optical condition: good FYMONVILLE MULTI-Z6L 6X SAF AXLES 5X HYDRAULIC STEERING AXLES REMOTE CONTROL AIR SUSPENSION ELECTRO-HYDRAULIC PACKAGE TIRE SIZE 245/70 R17.5 EXTENDABLE LOADING PLATFORM SIZE 1100 CM + 370 CM EXTENDABLE, TOTAL LENGTH OF THE LOADING PLATFORM 1470 CM WIDTH OF THE LOADING PLATFORM 274 CM + 2 X 25 CM SIDE EXTENSION, TOTAL WIDTH OF THE LOADING PLATFORM 320 CM LOADING EDGE HEIGHT 95 CM 2X HYDRAULIC RAMPS HOOK EYES AND KING PIN LED LIGHTS LARGE TOOLBOX CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN Ibjdpfszpya Tsx Anmsa WE SPEAK SPANISH WE SPEAK ENGLISH

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Gooseneck: * MAX810-H neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm * Truck hydraulic connection with flow control (20 l/min), * incl. gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 l with MAX trailer couplings; otherwise, the customer must supply the couplings. * For SZM: 6 x 4 or 8 x 4 Loading platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X Iodpfszbfuhsx Anmjba * 6-axle telescopic loading platform with bolt-tab coupling at the front and a slope of approx. 500 mm x 8° at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. PENDULUM AXLE 2-AXLE FRONT AXLE * All axles hydro-mechanically steered. * MAX810 chassis-PA-X-F-2-17.5-1.50-2.75 bolt-tab coupling at the front and rear. * Length: approx. 2,970 mm Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2 * Extendable widening elements by approx. 230 mm per side for a 2-axle chassis. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM * All axles hydro-mechanically steered. * Hose burst valve on the axle balancing cylinder with automatic RESET function. * Hydraulic cylinder with shut-off valves and quick-release coupling to secure in the raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle balancing. TIRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141. Final coating of the axles * with 2 coats of 2-component paint, solid color in DB7350 Novagrau. * PAINTING Complete steel construction is automatically blasted with a shot-blasting system after welding. * Second blasting process with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * PAINTING Semi-trailer in carmine red (RAL 3002) Including the following accessories * Gantry with winch for spare tire on the front of the gooseneck. * 3.5-inch Kingpin * Steel front panel approx. 400 mm high. * Aluminum side and rear panels that can be attached to the gooseneck, approx. 400 mm high, in anodized design. * Control levers on the gooseneck protected by a folding cover. * Lighting for the controls on the gooseneck with on/off switch. * A 7-pole socket on the left and right rear of the gooseneck for the warning panel. * Load gauge on the gooseneck for axle load determination on the front and rear chassis. * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the lowbed with screw couplings. * Access to the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 HP) at 3000 rpm Emission level: EU Stage V Max. Hydraulic pressure: 280 bar Max. Flow rate: 21 l/min Mounted on the gooseneck. * Hydraulic oil tank 100 L Frame hot-dip galvanized (± 480 kg) * Hydraulic connecting lines between the power pack and the connector plate on the gooseneck. * Radio remote control: * Operation of the power pack, start/s

Condition: new, maximum load weight: 96,500 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, loading space length: 26,900 mm, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm Ibodpfx Anjzahp Semea * For semi-trailer with multiple axles (SZMs): 6 x 4 or 8 x 4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for suspending the supply lines, the SZM tank must have a minimum capacity of 80 l * With MAX Trailer coupling parts, otherwise coupling parts must be supplied by the customer * Gantry with winch for spare wheel on the front of the gooseneck * 3.5-inch kingpin * Steel front panel approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * Control levers on the gooseneck protected by a folding cover * Lighting for the controls on the gooseneck with on/off switch * A 7-pin socket on the left and right at the rear of the gooseneck for the warning sign * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from the gooseneck to the low-bed with screw couplings * Access to the gooseneck * Four warning signs that can be extended by approx. 1,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting bracket for a rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 hp) at 3000 rpm * Hydraulic connection lines between the power pack and the connector plate on the gooseneck * 1 LED work light on the left and right at the rear of the gooseneck with separate on/off switch * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of the trailing axle steering, in addition to the cable remote control, with 2 LED indicator lights on the receiver as a single-axle control. - Operation of raising/lowering the gooseneck - Operation of raising/lowering the suspension of the chassis 2-axle front bogie: * Bolt-on coupling at the front and rear. Length: approx. 2,970 mm. Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2. (not connected to the track rods) * A 7-pin socket on the left and right at the rear of the front bogie for the warning signs * Surface of the chassis with a sand-blasted coating for slip resistance * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * A 7-pin socket for the warning signs, on the left and right on the front chassis, in the area of the axles * Extendable widening elements by approx. 230 mm on each side for a 2-axle chassis * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for the warning signs for insertion into the pocket recesses in the outer frame of the loading platform Loading platform: * 6-axle double-extendable loading platform with bolt-on coupling at the front and a slope of approx. 500 mm x 8° at the rear * Loading platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Basic width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform with a sand-blasted coati

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Year of construction: 2020, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowloader is year 2016 but sold new in 2020 We speak German Hablamos Español We speak English Ibsdpfx Aex Upxxsnmja

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) Ibedpfxsrgzv Ns Anmja * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. Iedezu Ebtopfx Anmeba 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: used, maximum load weight: 48,300 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Loading platform with double extension and rear bevel of approximately 500 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings mounted horizontally at the front of the loading platform (LC 10,000 daN). 1 intermediate table approximately 250 mm wide. Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approximately 48 mm thick, with diamond plate flooring over the axles. Axles: BPW axles and suspension, all axles hydro-mechanically steered. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Tires: 245/70 R 17.5 3PMSF, load index (146/146 F). Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Complies with EU regulations, with EBS-E (4S3M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. Iedpfx Aozqiitjnmeba High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Steel construction: Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Complies with EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connecting strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Includes the following additional equipment: 2-inch kingpin. A galvanized steel front bulkhead, approximately 400 mm high. Yellow-red air couplings on the galvanized front connecting strip. 4 wheel chocks with holders on the front bulkhead. A spare wheel holder in front of the front bulkhead. Electro-hydraulic unit. Trailing steering at the front and rear, operable by cable remote control via push buttons, with single-axle control of the axles (without installation in the tractor unit). TPMS tire pressure monitoring system according to ECE R 14. Load gauge to determine the axle loads, including a load chart. Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in profiles are removable (overall length approximately 2,560 mm). A galvanized toolbox, integrated in the beveled gooseneck. 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or 45' container. 7 pairs of profile pockets for plug-in profiles approximately 100 x 50 mm in the outer frame of the loading platform. Extensions, galvanized, extendable by approximately 230 mm on each side. Sliding attachment rails for aluminum loading ramps at the rear of the vehicle. 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear. Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load status. Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2, removable protective cover around the pumps. 2

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Iodpfjzqiiasx Anmeba Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading platform Ibodezlwm Aspfx Anmoa * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, Excerpt of Equipment Gooseneck * with angled front corners approx. 45° and rear angle approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood decking approx. 30 mm thick Loading Platform * in double-extendable design with rear angle approx. 500 mm x 8° * 6 pairs of lashing rings that fold outwards (LC 5,000 daN) * 4 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings positioned horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood decking approx. 48 mm thick, with diamond plate decking over the axles * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Kingpin * JOST kingpins (mechanical) with 2-speed gear for approx. 24 t lifting capacity (approx. 50 t test load) Braking System * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor Painting * First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer * A high-quality 2-component (2K) * Topcoat, single color in RAL 3002 carmine red * Rear section metallic and painted in RAL 9010 (pure white) * Metallic paint not possible Steel Construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15 pole * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front panel, approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holder on the front panel (± 5kg) * A spare wheel holder in front of the front panel * Electro-hydraulic power unit (± 45kg) * Steering from the front and rear by means of cable remote control operated via push buttons, with single-axle control (without installation in the tractor unit) * Mounting at the rear of the gooseneck for aluminum loading ramps Iedpfszlwm Nox Anmeba * European reflector plates (red-yellow) at the rear of the trailer * Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer * On the gooseneck and at the rear panel, one holder each on the left and right for warning signs including socket * Mounting rail for aluminum loading ramps at the rear of the vehicle * A holder for a rotating beacon at the rear of the trailer * Galvanized folding supports under the angle of the loading platform * A mud flap at the rear of the trailer * Manual and description on USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining the axle loads including load diagram.

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck Ibodszk S Dmepfx Anmja * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Condition: used, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck: - with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approximately 30 mm thick Loading platform: - in extendable design with rear taper of approximately 1,000 mm x 8° - 5 pairs of lashing rings that fold outwards (LC 5,000 daN) - 3 pairs of lashing rings that fold outwards (LC 10,000 daN) - 1 pair of lashing rings lying flat at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) - Hardwood flooring, approximately 48 mm thick - Diamond plate flooring over the axles Kingpin supports: - JOST kingpin supports (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tires: - 235/75 R 17.5 3PMSF Axles: - BPW axles, two fixed axles, two steered axles, air-sprung - with drum brakes with lifting/lowering function - The steered axles with electro-magnetic reverse lock can be activated via reverse gear or manually Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork: - High-quality 2-component (2K) topcoat in a single color, RAL 3002 carmine red Accessories: - One spare wheel holder in front of the front wall (without spare wheel) - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high - Yellow-red air couplings on the galvanized connection strip at the front - 4 wheel chocks with holder on the front wall - Mount at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the taper of the loading platform - One holder for a rotating beacon at the rear of the trailer - Yellow reflector tape in accordance with EU regulations on the side, on the extension, and at the rear of the trailer - One holder for warning signs on the left and right sides of the gooseneck and rear panel, including socket - Load scale to determine axle loads, including load diagram Includes special accessories: - Aluminum side and rear walls on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' container - Adjustable mounting rails for aluminum loading ramps at the rear of the vehicle - 6 pairs of stake pockets for pluggable stakes, approximately 100 x 50 mm in the outer frame of the loading platform - Extensions, galvanized, extendable by approximately 230 mm on each side - Lift axle on the front axle with control via TEBS E - 2 LED reversing lights mounted on the rear panel Ijdezkx Huepfx Anmsba - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - An acoustic warning signal when reversing - HRM metallization (High Resistance Metallization)

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 2026, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm Iedezhxgiopfx Anmjba • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Ibedpfx Aoy Auhusnmsa Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Condition: new, maximum load weight: 47,300 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: * Gooseneck with beveled front corners (approx. 45°) and rear bevel (approx. 750 mm x 10°) * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading platform with rear bevel (approx. 1,000 mm x 8°) * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading area for hooking tensioning straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick; over the axles, diamond plate surface Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Ibodpfxeyvnfge Anmja Tyres: * 235/75 R 17.5 3PMSF tyres, brand at our discretion Axles: * BPW axles, two rigid axles, two trailing steering axles, air-suspended, with drum brakes, lifting/lowering function * Steering axles with electromagnetically-activated reverse lock (via reverse gear or manually) * Axle tools Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (4S3M), no connecting lines to the tractor unit Steel structure: * Steel construction from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield 355 MPa) S690QL/S700MC (yield 690 MPa) Electrical system: * Electrical system compliant with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets (ISO standard: 24N - ISO 1185, 24S - ISO 3731, 15-pin - ISO 12098) Paintwork: * Premium and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-color topcoat RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the bulkhead (without spare wheel) * 2 inch kingpin * Galvanized steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanized front connection bar * Receptacle at the rear of the gooseneck for ALU loading ramps * Galvanized drop-down supports under the loading area bevel * Bracket for a revolving beacon at the rear of the trailer * Brackets left and right on the gooseneck and rear plate for warning signs including socket * TPMS tire pressure monitoring system compliant with ECE R 141 * Removable ALU sideboards and rear wall on the gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized insert posts are removable (body length approx. 2,560 mm) * Galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the loading platform for one 20' (30') or one 40' container * Sliding hook-in rails for ALU loading ramps at the rear of the vehicle * 6 pairs of pockets for plug-in posts, approx. 100 x 50 mm in the outer frame of the loading area * Galvanized extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with TEBS E control based on current axle load and load status * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry-

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL Iedpfx Anoyhkqzemsba * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area Ibsdpfx Aew Tpq Denmoa - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin Isdpfxjyhkrro Anmsba * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Iedju Sd U Uepfx Anmoba Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: excellent (used), axle configuration: 1 axle, permissible axle load (axle 1): 6,600 kg, first registration: 03/2002, loading space length: 10,000 mm, loading space width: 2,300 mm, total length: 10,250 mm, total width: 2,300 mm, total height: 850 mm, suspension: air, wheelbase: 7,120 mm, color: other, Year of construction: 2002, Axle configuration Brakes: drum brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 6600 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 60%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Weights Empty weight: 4.030 kg Carrying capacity: 4.070 kg GVW: 8.100 kg Functional Height of cargo floor: 85 cm Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: very good Visual appearance: very good Identification Registration number: OG-87-VX = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: Iodpfx Aszt Snqonmsba - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 07/2021, total width: 3,000 mm, total height: 3,760 mm, Equipment: ABS, * Separate hydraulic unit * Hydraulically adjustable loading ramps * 4 hydraulic auxiliary supports * Hydraulically extendable low-bed (3000mm) * Extendable loading platform (500mm) * AXION radio system with remote control * Gooseneck with sideboards & storage box * Hydraulically steered axles ----* Wabco Trailer EBS-E system * SAF axles with drum brakes * Wabco SmartBoard unit * Height-adjustable low-bed * Rear view camera * Telematics ----The following work was carried out in February by ES-GE Nutzfahrzeuge.* Brake drums, brake shoes & pads, brake cams, bushings & linkage adjusters replaced on all 4 axles * Sprag cylinder heads replaced * Bearings of the axle pivot supports on TwinAxle II replaced * Electrical system lighting repaired * Hydraulic accumulator replaced * EBS system repaired * Electric pump checked * HD oil and filter replaced * Axle play checked * Central lubrication system checked * Lever of the suspension repaired * Sensors for height adjustment repaired * Distribution box at the front repaired * Wooden floor repaired * Cover plates repaired * Compressed air tank reattached * Wheel bearings checked ----* Tire dimension: 245/70R17.5 * Technical total weight: 73000 kg * Tare weight: 14600 kg * Overall length: 13200 - 16200 mm * Overall width: 2540 - 3000 mm * Kilometers driven: 194000 km * Next inspection due: 09.2026 ----Vehicle number: 12154----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle delivery * Vehicle registration * Recovery and vehicle transport Ibodpfxszbw N Rs Anmoa ----YOUR VTS TEAM

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website: -ge.de. The following is an excerpt from the equipment list. Complete equipment list available upon request. Iodey Auhhjpfx Anmsba GOOSENECK: * Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, with a rear slope of approximately 1,000 mm x 6° * For semi-trailer tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grated steel flooring with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approximately 500 mm wide * Round NATO socket on the connection bar at the front (Maeler & Kaege VG 96 917) * 1 pair of plug-in aluminum side panels on the gooseneck, approximately 400 mm high, with an anodized finish * 1 LED work light each on the left and right sides at the top of the front wall, operated via an on/off switch (operating the work lights from the semi-trailer tractor is not possible in this case) LOADING AREA: * Loading area, approximately 9,600 mm long, with a rear slope of approximately 900 mm x 6° * Loading area behind the gooseneck can be hydraulically raised and lowered, approximately 3,000 mm long, with a load capacity of up to approximately 9,000 kg * Continuous grated steel flooring with approximately 5 mm sheet metal backing as additional reinforcement on the lifting platform and the loading area, designed for point loads TIRES: * 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse locking function, activated via reverse gear and manually * 1st axle with starting assist * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with grated steel flooring, approximately 4,920 mm long and approximately 900 mm wide * Hydraulically folding ramp tips * Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp operation controls * Ramp locking in the driving position by means of a quick-release mechanism * Painted sandblasted coating on the outer frame of the ramp and on the ramp tip * Mechanical supports in drop-pipe design on the sides of the ramps for support when connecting to loading docks * Operating valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM: * WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection PAINTING: * Trailer: Carmine Red (RAL 3002) * Rims: Silver Gray * Side panels: Aluminum, natural finish * Wheel hubs: According to axle manufacturer * Lamp housing: Pure White (RAL 9010) EQUIPMENT: * Steel front wall, plug-in, approximately 1,600 mm high, including a connection bar for supply lines to the semi-trailer tractor, mounted approximately 1,000 mm from the bottom edge of the outer frame profile * Attachment option for lashing chains on the inside left and right sides of the front wall, including aluminum trays underneath on the left and right sides for storing chains or tension straps * Appro

Condition: used, maximum load weight: 35,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck in SNT design to optimize the length of the loading area, approximately 3,700 mm long. The rear of the gooseneck has a bevel of approximately 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. Suitable for SZM (special heavy-duty vehicles): 4 x 2 and 6 x 2 axle configurations. Loading Platform: Telescoping loading platform, approximately 9,600 mm long, with a rear bevel of approximately 900 mm x 6°. The loading platform can be hydraulically raised and lowered after the gooseneck, with a length of approximately 3,000 mm. Load capacity up to approximately 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS. A pair of two-part AXS steel ramps with a length of approximately 4,920 mm and a width of approximately 900 mm. Open grid flooring. Hydraulically folding ramp ends. The ramps can be individually moved outwards approximately 235 mm and inwards approximately 365 mm hydraulically. Maximum load and approach angle according to technical data sheet: C470319. Maximum angle of inclination with the loading platform lowered: approximately 9°. Axles and Suspension: BPW axles and suspension. The 1st and 2nd axles are fixed, and the 3rd axle is steered. Technical axle load: 12,000 kg. Electro-magnetic reverse lock, activated via reverse gear and manually. Air suspension with lifting and lowering valve. Axle tool. Ibodpfx Aezkx Hbenmea Braking System: Braking system from WABCO EBS-E, in accordance with EU regulations. No connection cable to the tractor unit. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer of our choice. Load index 143/141J (144/144F). Paint Finish: 6-coat finish: Complete steel construction blasted with shot after welding. 1 coat of zinc-based primer, 1 coat of adhesive primer. Topcoat with 2 coats of 2-component paint (acrylic), in a single color: RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra charge. Included Accessories: - ASPÖCK-UNIBOX on the connection strip at the front, with 24N, 24S & 15-pin sockets. - 24N connection according to ISO-1185 - 24S connection according to ISO-3731 - 15-pin connection according to ISO-12098 - 3 kW electric-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches. - Parking position on the gooseneck for warning signs when not in use. - Outboard supports on the gooseneck with mounting holes for screw-on lashing rings. - The first hole is approximately 200 mm from the front, then approximately every 400 mm. - One mounting hole in the rear upper area of the outboard supports of the gooseneck for a screw-on lashing ring. - 1 pair of screw-in lashing rings included (LC 10,000 daN). - 3 pairs of recessed lashing rings inside the outboard support of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings in the middle of the gooseneck (LC 5,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - Grid flooring with approximately 5 mm sheet metal reinforcement on the gooseneck and rear bevel. - 2-inch Kingpin - Guide plate on the gooseneck for the fifth-wheel plate, approximately 500 mm wide. - Mechanical fifth-wheel supports with 2-speed gearbox and crank. - JOST Module B - static test load = 50,000 kg - Continuous grid flooring with 5 mm sheet metal as additional reinforcement, designed for point load: - Locking of the loading platform with conically welded locking profile

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. Ibodpfx Answta Aljmja WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) Ijdpfxjy Auh Ij Anmeba * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...