Used Fenwal Y-Type Connector Set With Luer Lock for sale (62,170)

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Fsdouzv Tzspfx Akhsgf Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, functionality: fully functional, color: orange, overall weight: 72 kg, Year of construction: 2026, Equipment: hydraulics, The TEC-POINT Hydraulic Breaker KT40 in Top Type-S configuration is the professional solution for demolition, concrete breaking, foundation work, civil engineering, sewer construction, landscaping, and compact job site applications with mini and compact excavators. Thanks to its robust construction, compact size, and reliable impact performance, the KT40 is ideally suited for daily use on construction sites. The top-mounted design ensures efficient power transmission and excellent operating reach when breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 0.8 to 2.5 tons 📍 Available immediately from stock in Rheda-Wiedenbrück 🚚 Local pickup or Europe-wide shipping via freight forwarding available 💶 Price: €1,200 net plus statutory VAT – negotiable 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen bottle, hydraulic hose set, service case – ready for immediate use! ⚙️ Technical Data 🔹 Model: KT40 Top Mount S Fgodpfjy N R Azsx Akhef 🔹 Configuration: Top Type-S / straight design 🔹 Suitable for carrier weight: 0.8 to 2.5 tons 🔹 Weight: 72 kg 🔹 Operating pressure: 90–120 kg/cm² / approx. 88–118 bar 🔹 Required oil flow: 15–30 l/min 🔹 Impact frequency: 800–1400 blows per minute 🔩 Mounting dimensions / Compatibility 🔹 Mounting width: 92 mm 🔹 Pin center distance: 90 mm 🔹 Pins/Bore: Ø 25 mm 🔹 Chisel diameter: 40 mm We would be pleased to check the appropriate mounting for your excavator model and coordinate it individually upon request. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Feel free to contact us today – we will advise you personally and help you choose the suitable hydraulic breaker for your carrier unit. We warmly invite you to visit our warehouse in Rheda-Wiedenbrück. On site, you may view, compare, and, by arrangement, test our machines and attachments. We look forward to your inquiry!

Condition: ready for operation (used), functionality: fully functional, The Treif Felix Type 2700 dicer is a high-performance solution for cutting food products into cubes or strips, whether it’s meat, cheese, or even plant-based items. Engineered to meet the demands of rigorous industrial environments, it ensures consistent, high-quality cuts—crucial for portion uniformity. Thanks to its cross-cutting technology, it transforms raw materials with remarkable precision while minimizing waste. Additionally, its compact design allows for easy integration into any production line, even where space is limited. The Treif Felix 2700 also stands out for its intuitive handling, significantly reducing operator training times and simplifying daily use. The cutting grids can be changed quickly, enabling smooth transitions between different product formats. Furthermore, its stainless steel construction guarantees impeccable hygiene, which is essential in the food processing industry. Cleaning is simplified by quick access to key components, thereby reducing downtime caused by maintenance. Its robust mechanical design allows for reliable operation, even under intensive use. Ultimately, choosing the Treif Felix 2700 dicer means choosing consistency, performance, and precise control over every cut. Please contact us for a quote or to arrange a technical demonstration of this essential machine. Technical specifications: • Hourly capacity: up to 900 kg/h • Cutting size: from 3 to 40 mm • Dimensions: 950 x 600 x 980 mm • Motor: 1 kW, three-phase Fsdpfxsw Su Hze Akhsgf • Weight: approx. 148 kg

Condition: excellent (used), Condition: used, with normal signs of use, fully functional Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 Set includes: Vetter air lifting bag air hoses with quick couplings Fgsdpey Af S Rsfx Akhef transport bag complete set as shown in the photos ⚙️ Technical data: Model: Type 1/13 (VSM 14) Max. lifting force: 65 kN (approx. 7.2 tons) Max. working pressure: 1 bar (14.5 PSI) Nominal capacity: 403 L Air requirement: 806 L Year of manufacture: 2018 🛠️ Applications: technical rescue (fire brigade) lifting of machinery and vehicles service and industrial work emergency situations 📌 Additional information: equipment from a reputable German manufacturer robust and durable construction fast and safe lifting of heavy items sold exactly as shown in the pictures

Condition: excellent (used), Condition: used, shows normal signs of use, fully operational Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 The set includes: 2x Vetter air lifting bag Type 1/6 complete set of air hoses (yellow + red) Fodpfx Aoy Af Tnokhegf quick couplings carrying bag the set exactly as shown in the photos ⚙️ Technical specifications: Model: Type 1/6 Maximum lifting capacity: approx. 3.2 t (32 kN) – each bag Max. operating pressure: 0.5 bar Volume: approx. 403 L Air requirement: approx. 603 L Hoses: DN 19 mm working pressure 1 bar (14.5 PSI) ISO standard 🛠️ Applications: technical rescue (fire department) lifting of vehicles and machinery workshops and industry maintenance and emergency operations 📌 Additional information: renowned German manufacturer – Vetter complete set, ready for immediate operation solid, durable construction fast and safe lifting of heavy elements sold as shown in the photos

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser hours: 27,000 h, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Fjdszr Ha Ejpfx Akhegf

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Fjdpfxszq A Ipo Akhjgf Pressing force: 130 tons

Condition: used, isoloc machine feet 8.0 – set of 6 – like new Fjdpfxezcq Enj Akhsgf 6 isoloc machine feet 8.0 (UMS8) from isoloc Schwingungstechnik GmbH. In very good, like-new condition. Ideal for vibration-isolated installation and precise leveling of machines. Robust industrial quality – Made in Germany.

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Includes Loadmaster. Fedpjzcvx Tjfx Akhjgf

Condition: excellent (used), Professional TITE-LOCK MILLING CHUCK with SK40 – CT20A mounting – 90 mm. The high-quality quick-clamping TITE-LOCK system ensures exceptional clamping force and working precision, ideal for milling, drilling, and precision machining. . Type: TITE-LOCK MILLING CHUCK . Mounting: SK40 – CT20A . Length: 90 mm . Applications: milling, drilling, CNC machining . Condition: used, fully operational, very good technical condition ✅ Robust and precise industrial tool for professional use on milling machines and machining centers. Excellent rigidity and high tool holding force. Fedpfx Aksxk T H Ashsgf

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Fedpfxjyyygke Akhogf Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: used, table length 630 mm table width 500 mm Fgjdpsyt R R Ssfx Akhof table load / t

Condition: like new (used), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: S2000BM-00308, turning diameter over cross slide: 360 mm, turning length: 540 mm, turning diameter: 360 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 600 mm, bar passage: 68 mm, Only 3 operating hours - the machine has not yet been used due to a project cancellation. Fgodpfx Akszpwmqjhef New price: EUR 124,000 plus VAT. TECHNICAL DETAILS Max. swing diameter over bed: 510 mm Max. swing diameter over slide: 360 mm Max. turning diameter: 360 mm Max. turning length: 540 mm SPINDLE Spindle nose: A2-6" Bar capacity: 68 mm Max. spindle speed: 4,500 min⁻¹ Main spindle motor power: 15 / 18.5 kW C-axis: continuous TURRET Tool stations: 12 / BMT 55 Motorized tool stations: 3.7 / 5.5 kW Speed of motorized tool stations: 5,000 min⁻¹ Max. torque motorized tool stations: 16 Nm Indexing time tool turret: 0.15 s Tool holder for external tools: 25 × 25 mm Tool holder for internal tools: Ø 40 mm TAILSTOCK Tailstock mounting: MK 4 Tailstock type: programmable Tailstock quill stroke: 450 mm Tailstock quill diameter: 75 mm Tailstock taper: MT 8 Tailstock quill force: 5,047 Nm AXES AND FEEDS Travel X-axis: 210 mm (180 + 30 mm) Travel Z-axis: 600 mm Drive power X/Z-axis: 1.8 / 3.0 kW Guide rail inclination: 45° Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Ball screw X-axis: Ø 28 mm Ball screw Z-axis: Ø 40 mm ACCURACY Unidirectional positioning repeatability: 6 µm Positioning accuracy X-axis according to ISO 230-2:1988: 15 µm Positioning accuracy Z-axis according to ISO 230-2:1988: 15 µm MACHINE DETAILS Operating hours: 3 h Control system: FANUC 0i TF PLUS Connected load: 31 kVA Supply voltage: 380 V ±10 % Mains frequency: 60 Hz Phases: 3 Machine length without chip conveyor: 2,643 mm Machine depth: 1,560 mm Machine height: 1,920 mm Machine weight incl. chip conveyor and transformer: 4,000 kg COOLANT SYSTEM Coolant tank volume: 185 l Coolant pump output: 0.5 kW Coolant flow rate: 20 l/min Coolant pressure: 5.0 bar EQUIPMENT - FANUC 0i TF PLUS CNC control system - CE conformity - IndustryNet4 connection: remote maintenance, remote monitoring and Industry 4.0 requirements. - Manual Guide i (MG-i) - Preparation for tool force monitoring - 10.4" color LCD monitor - Electronic handwheel - USB interface - Ethernet interface - RS-232 interface - Memory card slot - Manual tool measurement - Parts catcher - Hydraulic 3-jaw chuck, Ø 200 mm, bore 68 mm - Rigid threading - Control cabinet with heat exchanger - Automatic coolant system with 4.5 bar pressure - Central, time-controlled lubrication system - Cooling system for the hydraulic unit - Belt-type chip conveyor with right-hand discharge - Electrical and electronic preparation for bar loader - Internal machine work light - External machine status indicator

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm Fjdpfxsxh Rqtj Akhegf max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Fgjdponzib Eofx Akhof Work head Spindle speed (variable) 10~500rpm/min Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Fjdpezrg T Eefx Akhegf Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: serie nr 3149, overall weight: 11,800 kg, total width: 6,615 mm, total length: 8,890 mm, total height: 2,050 mm, spindle diameter: 50 mm, type of input current: three-phase, space requirement length: 16,000 mm, space requirement width: 8,000 mm, milling spindle length: 650 mm, compressed air connection: 8 bar, spindle speed (min.): 3,500 rpm, spindle speed (max.): 3,500 rpm, length stop: 3,450 mm, input voltage: 125 V, power: 65 kW (88.38 HP), main saw diameter: 450 mm, corner unit for window and door frames, including tools. controlled from the office (Groeneveld). interpolation (angled pins). barcode laser. return transport. documentation available. complete sets of spare blades/saws, including router bits, linked to Groeneveld. automatic counter-piece. maximum workpiece length 6000. sticker printer for barcode. automatic waxelite pump. automatic central lubrication. connections for pin holes and counter-molds. automatic length stop and rotation for workpieces. including extraction pipes with automatic valve. thicknesses from 38 to 150 mm. pin bank: 1x saw blade 40mm. 2x pin shaft 50x650. 2x edge breaker 30x40. router: 1x rounding router 30x40. 3x router bits 50x600. machine can be picked up here; in conjunction with Bos Machines (dismantling and transport not included in the price). price excludes VAT. Fjdjztptqjpfx Akhegf

Condition: excellent (used), Gas heated nut roaster direct from closed granola / breakfast cereal factory. Rarely available. Fodpfx Ajy Hmv Sokhsgf

Condition: excellent (used), first registration: 08/2021, Year of construction: 2021, Technical condition: very good Optical condition: very good Fodpfx Akjztan Sshogf Please contact Maarten Busser or Niels Busser for further information.

Condition: like new (used), 2024 Star SP-23 CNC Sliding Head Lathe – Low Hours, High Specification, Immediate Availability Swiss CNC Ltd are pleased to offer two exceptional 2024 Star SP-23 CNC Sliding Head Lathes, both presented in excellent condition with low operating hours. Designed for manufacturers demanding uncompromising precision, high productivity and long-term reliability, the SP-23 is one of the most capable 23mm sliding head machines available today. Each machine is fully equipped for immediate production and supplied with a comprehensive automation package including an FMB Turbo 3-38 magazine bar feeder, LNS MH500 swarf conveyor, Filtermist oil mist extraction and FireTrace automatic fire suppression system. Machine Specification The Star SP-23 features a highly capable 7-axis configuration, providing exceptional flexibility for complex component manufacture. Axis Configuration * Main Spindle (Headstock): Z1 / C1 * Main Working Platen: X1 / Y1 * Sub Spindle: X2 / Z2 / C2 Machining Capacity * Maximum machining diameter: Ø23mm * Headstock stroke: 205mm (50mm Non-Guide Bush mode) * Bar feeder capacity: 4,280mm The machine offers the flexibility to run both guide bush and non-guide bush applications, making it ideal for both long, slender components and shorter, more economical parts. Main Spindle Performance The main spindle delivers outstanding productivity with: * Maximum spindle speed: 10,000rpm * 3.7kW spindle motor Tooling configuration includes: * 8 turning tool positions (12mm square) * 5 drilling sleeve holders accepting Ø22mm sleeves (ER16) * 2 fixed + 5 modular driven tool stations * Driven tooling speed up to 8,000rpm The high-frequency driven spindles provide excellent performance for milling, drilling, cross drilling and tapping operations, reducing cycle times while maintaining exceptional surface finish and accuracy. Sub Spindle Capability The fully programmable sub spindle provides efficient back-working operations and complete part machining in a single cycle. * Maximum chucking diameter: Ø23mm * Maximum spindle speed: 10,000rpm * 2.2kW spindle motor Back-working tooling includes: * 4 back-working platen positions * ER20 drill sleeve capacity * 4 driven tool positions (ER16) * Driven tooling speed up to 8,000rpm This configuration allows complex second-operation machining without secondary handling, improving productivity and part accuracy. Included Equipment Each machine is supplied with: * FMB Turbo 3-38 Magazine Bar Feeder * LNS MH500 Swarf Conveyor * Filtermist Oil Mist Extraction * FireTrace Automatic Fire Suppression * High Frequency Driven Spindles Ideal Applications The Star SP-23 is perfectly suited to high-volume production across a wide range of industries including: * Medical * Aerospace * Automotive * Hydraulics * Electronics * Precision Engineering * Motorsport Available Now * 2 Machines Available * 2024 Model Year * Excellent Condition * Low Hours * Immediate delivery available Installation, commissioning, operator training and ongoing technical support are available through Swiss CNC Ltd. For further information, photographs or to arrange a viewing, please contact Swiss CNC Ltd. Fjdpfezqvhvsx Akhsgf

Condition: used, mileage: 447,852 km, power: 375 kW (509.86 HP), first registration: 08/2021, fuel type: diesel, overall weight: 18,000 kg, tire size: 385/65/22.5, axle configuration: 4x2, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/65/22.5, rear tire size: 315/70/22.5, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), hydraulics, low noise, navigation system, onboard computer, parking heater, soot filter, traction control, Iveco S-Way 510 with ZF Intarder - Automatic transmission - Intarder - Differential lock - Leaf and air suspension - Air conditioning - Auxiliary heater - 2 beds - Adaptive cruise control - Lane keeping assist - Multimedia navigation system - LED headlights - Electric side mirrors + power windows - Fog lights - EURO 6 Fgjdpfoztfb Rjx Akhsf - Full spoiler - Aluminum fuel tank - Tires: 385/55/22.5 - 315/70/22.5 In good condition! Export price! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price in our listings, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Type: 2005/100 Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland. Fgedpfx Aeznwwajkhsf

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Travel : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 1 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 POWER SUPPLY Fodpfx Akszk Rrvjhogf - Supply voltage : 200 [V] - Total installed power : 4.6 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.070 x 1.177 [mm] - Machine height : 1.760 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of hours under power : 42640 [h] - Number of working hours : 23491 [h] - Number of spindle hours : 12535 [h] EQUIPMENT - CNC : Fanuc Oi-TD - 3 colors status lamp - Rotating guide bush - Ejection of workpiece - Parts catcher - Parts conveying strip - Coolant tank - Bar loader : IEMCA SMART 320 / 32 LL - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 6 END ATTACHMENT - Number of positions : 8 Fjdpfx Akozrh R Sehjgf - Number of motorized positions : 5 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1102 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 34646 [h] - Number of working hours : 7582 [h] EQUIPMENT - CNC : Fanuc 18i- TB - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank * with high-pressure pump - Bar loader : Iemca Smart 320 - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT Fgodpfx Ajuhazajkhjf - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] - Machine weight : 3.100 [kg] MACHINE HOURS - Number of working hours : 35.367 [h] EQUIPMENT - CNC : Fanuc 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump - Bar loader : FMB Turbo 3-36/3200/A (2008)) - Ejection of workpiece - Parts catcher - Parts conveying strip - Chips conveyor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.