Used Filma Fp10 Cp260 for sale (33)

Year of construction: 2008, condition: good (used), functionality: fully functional, Pallet wrapper FILMA FP10 CP260 Itedpfxezu Nb Rs Abysk used, from site closure Year of manufacture: 10-2008 Maximum load: 1500 kg Turntable diameter: 1.5 m with access ramp Price net plus VAT, free loading onto truck Transport dimensions: 2.42 x 1.50 x 0.80 m

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3583 Manufacturer: Filma Model: FP 30 ES * Turntable positioning via fixed stop * Programmable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 3200 mm!!!! * Own weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! Iedpeyx Ex Aofx Abystk * With access ramp * In very good condition!!

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control Isdpfx Aboztl Scjyjtk - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Ijdpoztpw Nsfx Abyotk Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: good (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Amada, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, FOR SALE: Amada HPF 100-3 CNC Hydraulic Press Brake Amada HPF 100-3 – Reliable CNC Press Brake for Heavy-Duty Sheet Metal Work We are offering a used Amada HPF 100-3 CNC hydraulic press brake in [good / fully operational] condition. This is a well-established machine from one of the world’s leading manufacturers of sheet metal machinery, ideal for a wide range of industrial bending operations. Key Specifications - Pressing force: 100 tonnes (1,000 kN) Iedpfey Hf Tpex Abystk - Maximum bending length: 3,100 mm - Distance between frames: 2,700 mm - Stroke length: 200 mm - Throat depth: 420 mm - Open height: 470 mm - CNC control: Amada Operateur / OP 2000 - Number of axes: 7 (Y1, Y2, X, R, Z1, Z2 + crowning) - Motor power: 9–11 kW - Approximate machine weight: 6,750 kg Machine Details - Year of manufacture: 2002 - Condition: Good! - Tooling included Why Buy This Machine? The Amada HPF 100-3 is a robust and precise hydraulic press brake engineered for demanding, high-volume production environments. The Amada CNC control simplifies the programming and storage of complex bending sequences, making it ideal for both batch and repeat production. With a bending length of 3,100 mm and a capacity of 100 tonnes, it covers the majority of industrial sheet metal forming requirements.

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Iedpfx Absykbcmeyetk Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: Itjdpjzi S R Rsfx Abyjk • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Itjdpfx Abjvn S I Dsysk Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Documentation available Digipro angle measuring system Supplied with 1 set of tools

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Itjdpfxoyyz Ebj Abyok Subject to prior sale, modifications, and errors!

Condition: ready for operation (used), Unipo 2TT0901CAN02A UFP 10.4" S TFT monitor, SN: 86351, used, in good condition, 100% functional, scope of delivery as per photos. Itedpjzu Hn Ijfx Abyek

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm Itodpfxjyyzxho Abyjk - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Year of construction: 2002, condition: used, We offer this used MAPLAN MTF 1500/280, year of manufacture 2002. Machine type: MTF 1500/280 Serial number: 1120157 Year of manufacture: 2002 Connected load: 66 kW Isdsyf E Naspfx Abystk Control type: B&R - CP260 Panel type: Maplan PC 4000 - DOS Year of manufacture: 2002 Condition: ready for operation (used) Operating hours: 86,018h Description: Clamping force: 2800kN Injection volume: 1500ccm Distance between tie bars (width): 600mm Distance between tie bars (length): 220mm Heater plate size (LxW): 630/500mm Daylight (distance between open plates): 500mm Connected load: 66kW Power supply: 3x 400V/50Hz Machine dimensions (LxWxH): approx. 3.30x3.30x3.20 m Machine weight: approx. 7000kg Input current type: standard industrial three-phase Equipment: documentation If you have any further questions or require more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2023, operating hours: 499 h, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. Iodsyyz Txjpfx Abyetk 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. Itodpfx Ajyyxxfobyek • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Hydro-pneumatic saw feed Pneumatic material clamps Itsdpfx Abjxn Iq Doyok Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Isdpfx Aexvbvvebyetk - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories Ijdpfxsw D T Uij Abyjtk - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: excellent (used), Year of construction: 2005, Technical specifications: Iedpov I Sp Ijfx Abystk Working length: 3100 mm Column width: 2650 mm Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1015, profiles with dimensions (HxB) up to 100x195mm, 80x200 mm automatic work cycle driven by a 3 kW/400 V, 2850 rpm motor cutting disc d=450x3.8x40mm, z=110 Iedpfx Abjwgmv Sjyetk horizontal and vertical material clamping on the feed side dosing spray system horizontal material clamping in the feeder moving both clamping jaws when retracting (prevents scratching of the profile) infinitely adjustable hydropneumatic cutting disc feed cutting disc exiting from the rear length of cut sections adjustable in the range of 0-300mm (with reversing device 0-600 mm) setting the cutting length by a handwheel with a mechanical counter maximum width of the cut profile 200 mm cutting range (height x width) 100x195mm, 80x200mm automatic shutdown when material runs out possibility of connecting a dust extractor

Condition: used, machine/vehicle number: 007243, Max. machinable height: 120 mm Maximum machinable width: 230 mm Itodpfxey Nkpbo Abyok Max. forward feed speed: 12 m/min Operator shafts number: 4

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Ijdexn Uptjpfx Abyetk

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 33639, A very well-preserved welding fume extraction unit ESTA type: SRF p 10, serial no.: 33639, year of manufacture: 1998 Iedpfx Aeyr Rprobyjtk

Condition: used, Name: Filter Press Manufacturer: MSE Type: KFP1000-90/60-25 Year built: 2011 Construction form: Side beam press Filter pressure:: 15 bar Press content: Approx. 1177 liters (expandable to 1766 liters) Cycle: Open Isdpfsrmmp Isx Abystk Filter area: Approx. 101 m2 (expandable to 152 m2) Plate size: 1000 x 1000 mm Number Plates: 60 (expandable to 90) Plate material: Polypropylene Plate Transport: Automatically Filter cloth washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Technical doc.: Yes Accessories: Drip trays, 25 replacement plates, control cabinet, hydraulic system, light curtain Condition: Second hand Price: On demand

Condition: used, Year of construction: 1989, • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 Itedjk E Hrbepfx Abyjk • Edge material thickness max. (mm): 3 – depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm • Electrical supply: 220 V - 1 phase - 50 Hz • Power consumption (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Work table height (mm): 1000 • Edge trimming unit: for processing thick PVC edges • Weight (kg): approx. 120

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material • Remnant piece from 75 mm (depending on the profile) Iodpfx Aezlr Rcsbyetk The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!