Used Fishbam Static Autoclave, 4-Basket, Double for sale (64,062)

Condition: like new (used), STATIC AUTOCLAVE FISHBAM, 4 BASKETS, DOUBLE DOOR Iijdpfx Acoyufk Njwsb

Condition: like new (used), The Ferlo static autoclave's sterilization process is based on heat and cold transfer via a water cascade system. This autoclave is suitable for products that do not require agitation during the sterilization process. Water is circulated by a pump through a stainless steel plate heat exchanger for indirect heating. Heating and cooling of the water, which is used throughout all process cycles, is carried out in the plate heat exchanger via steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PÂTÉS, CANNED FRUIT, FISH. Features: Diameter: 1,380 mm. Double door. Iedpfx Asyz Tt Tocwjib Basket: 0.98 x 0.98 x 0.93 m. Heat exchanger. Automated loading and unloading. Operation by water cascade system. Control panel. Valves. Distance between guides: 0.77 m.

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Iisdpfxex S Ipwo Acwjb Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders Isdpswva I Hsfx Acweib - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm Isdpfx Acsdzp Tceweib ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 1994, total length: 4,700 mm, total width: 1,200 mm, total height: 1,600 mm, Colour: Grey Weight: 672 kg - Year: 1994 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 228822 - Main motor power [kW]: 4.5 - Max. cutting length [mm]: 4040 - Max. cutting height [mm]: 150 - Max. saw blade diameter [mm]: 400 Isdsxbf E Sopfx Acwjib - Arbor saw blade diameter [mm]: 32 - Voltage [V]: 380 - Power [kW]: 11.2 - Transport dimensions: 4700mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 672kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, A used demountable META shelf rack (5270x635x2500 mm) made of galvanized steel is a durable and versatile storage system in various environments, such as warehouses, garages or industrial areas. Galvanized steel offers excellent corrosion resistance, making the storage rack durable and suitable for various environments, including humid Iedpfx Aew Sxvmscweib

Condition: used, mileage: 249,000 km, power: 205 kW (278.72 HP), first registration: 06/2004, fuel type: diesel, overall weight: 24,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: blue, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,430 mm, Year of construction: 2004, Equipment: all wheel drive, crane, Grove GMK 2035, year of manufacture 2004, excellently maintained, 48 meters: 29-meter main boom, 19-meter fly-jib, with new UVV (safety inspection) and new TÜV (roadworthiness certification). For sale is a meticulously maintained Grove GMK 2035, German machine, 2nd owner, complete service history, exceptionally well-kept and reliable condition, professionally operated and fully serviced. Technical Highlights & Equipment: - Grove GMK 2035, year 2004 - Operating hours: approx. 21,400 h - Original 48-meter ship fly-jib Iijdpfsy Ifxbex Acwob - Twin hydraulic folding jib, backlash-free - Telescopic main boom: up to 29 m - 4x4 all-terrain chassis - Mercedes drive unit (robust, reliable) Recent maintenance: - Complete winch service: brand new (cost €14,800, documentation available) - One of the key components of the GMK 2035, completely overhauled and tested - New UVV, all safety-relevant inspections freshly performed - New TÜV, vehicle and crane inspection fully renewed - Well-maintained, seamless history with full documentation - No pending repairs - Mechanics, hydraulics, boom, and electrics in excellent condition Documentation: - All inspection reports readily available - Load charts for main boom and fly-jib - Winch documentation and €14,000 invoice - Complete German service history - Operator’s manual and service booklet Technical condition: - Hydraulics: tight, clean, powerful - Boom: in excellent condition, no play - Visual: tidy and clean - Immediately operational, no further investment required Despite utmost care, errors in this listing cannot be excluded. We reserve the right for mistakes and prior sale.

Condition: new, The Instrument Reprocessing Revolution Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device – compelling advantages for your practice! Why use four separate instrument reprocessing products when you can have everything in one? With Careclave, you'll save significantly more time, money, and space in your dental practice from day one compared to conventional device combinations: €6,000.00 less in service costs: Because fewer devices mean lower costs. Careclave is not only more affordable to purchase, but it also saves you the extra maintenance and validation costs for additional devices. 45% more space in the reprocessing room: Your practice team knows that workspace in the reprocessing room is valuable. With Careclave, you have significantly more space for the safe reprocessing of your instruments! You can do without an additional care device. 33% more transfer instruments per cycle: Careclave is a real speed demon. Reprocessing eight hollow instruments in just 16–18 minutes guarantees rapid reuse and thus reduces the need for additional instruments. The revolutionary 4-in-1 solution combines the entire instrument reprocessing process in a single device: 1. Cleaning and Disinfection Careclave® ensures the cleaning and disinfection of up to eight handpieces, prophylaxis handpieces, or ultrasonic scaler tips in just 16 minutes. 2. Maintenance Careclave gently and quickly maintains the handpieces in the Carebox. With the world's first integrated ADDcare maintenance station, the crucial chuck maintenance is also performed directly at the Careclave. 3. Sterilization (Class B) With its patented DRYtelligence® and double-jacket technology, the Careclave offers everything you would expect from a modern autoclave – and more: Sterilize up to 11 kg of instruments on up to 8 trays or in 4 MELAstore® boxes in record time. Thanks to the revolutionary chamber design, reprocessing and maintaining instruments in the Carebox, as well as simultaneously sterilizing other instruments on short trays, is possible in a single cycle. 4. Documentation and Release With ProControl, you can provide proof of flawless instrument reprocessing quickly, securely, and paperlessly. Documentation and release are performed directly on the Careclave® display without the need for additional software. For seamless traceability, the reprocessing protocols are saved to the MELAG USB stick or on the practice network. 4. Documentation and Release Model: Careclave 618 Dimensions (D x W x H): 65.3 cm x 48 cm x 56.2 cm Fits a 60 cm tabletop Internal dimensions: Ø 25 cm x 35 cm Area of ​​application: Dental Power supply: 220–240 V, 50 Hz Power consumption: 3 kW Compressed air connection: 4–8 bar Validability: Validatable Sterilization class: Class B Documentation: USB, network Chamber volume: 18 liters Iedpsyk Eqbefx Acweib Load capacity: 11 kg instruments / 2 kg textiles Suitable for textiles: Yes Suitable for hollow instruments: Yes Suitable for endoscopes: Yes Drying: Integrated drying system Color: White Weight: 69 kg MSRP €21,509.00 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2000, Double end tenoner Celaschi 4+4 motors Opening side up to 3000 mm Iodpfx Acjvx Afnewoib

Condition: reconditioned (used), Year of construction: 2003, Manufacturer: STAHL CraneSystems Type: SH6063-12 4/1 L3 Year of manufacture: 2003 Iedpfx Acjkn Snrswsib Load capacity appr.: 25,000 kg Hook path appr.: 10,000 mm Track width appr.: 2,800 mm Drive unit group: FEM/ISO 1Am/M4 Working speeds: Hoist appr.: 0.5/3.1 m/min Cross travel appr.: 1.0/20.0 m/min Certification of the remaining useful life of approx. 80% by an inspection expert. Equipped with: - with hook block - two lifting speeds - trolley with drive

Condition: reconditioned (used), Year of construction: 2000, Manufacturer: Demag Type: DH520 H20 4/1 F10 Year of manufacture: 2000 lifting capacity appr.: 8.000 kg hook path appr.: 10,000 mm trolley track appr.: 1,400 mm Reeving: 4/1 Thruster group: FEM/ISO 2m/M5 Working speeds: hoist appr. 0.8/8.0 m/min trolley appr. 5.0/20.0 m/min Certification of the remaining service life of appr. 80% by an inspection expert Equipped with: - Mechanical fine lift F10 - Rope and bottom block 4/1 Iedjkqm Aiopfx Acwoib - trolley

Condition: used, Year of construction: 2026, machine/vehicle number: PB15834, Weights Empty weight: 5.400 kg Functional Mast: articulated arm Iedpfsy Eliuex Acweib Lifting capacity: 230 kg Working height: 2.700 cm Dimensions of cargo space: 593 x 89 x 199 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1500 m Additional information Please contact PFEIFER GROUP for more information

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Iiedpfx Acjxrc Eqswob Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Iisdpfx Acsxrdgvewjb Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Condition: used, maximum load weight: 34,469 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2010, next inspection (TÜV): 10/2026, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2010, Additional features: * Homepage * Rear doors * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your specific country in advance. Iodpfx Acsy Dab Nswsib Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. ---- The stated prices exclude BPM and are only valid for export.

Condition: reconditioned (used), functionality: fully functional, The Barriquand Steriflow 1341 Autoclave is an essential asset for all food processing industries looking to optimize their sterilization processes. Featuring advanced technology and a precise control system, it ensures uniform heat treatment throughout the entire cycle. This guarantees optimal product safety while preserving taste and nutritional qualities. This model stands out for its high reliability and large capacity, making it perfectly suited for industrial-scale operations. Additionally, its reinforced stainless steel construction ensures durable corrosion resistance, while facilitating cleaning and daily maintenance. The fully automated cycles deliver consistently reliable results and significantly reduce the risk of human error. Its intuitive control panel, combined with highly flexible programmability, allows you full control over temperature, pressure, and processing time parameters. This makes it easy to tailor each cycle to suit a wide variety of products, including canned goods, ready meals, sauces, and jarred foods. Iodpfx Ajxg Ec Iocweib Investing in this autoclave means choosing proven technology that complies with European standards, boosting not only your products’ shelf life but also the overall performance of your production line. Technical specifications: • Vessel diameter: 1550 mm • Maximum temperature: up to 135 °C • Operating pressure: 2 to 2.5 bar • Power supply: 400 V three-phase • Approximate dimensions: L 834 cm x W 160 cm x H 220 cm

Condition: used, axle configuration: 3 axles, first registration: 01/2017, loading space length: 13,350 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, total length: 13,620 mm, total width: 2,600 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 70 %, color: white, Year of construction: 2017, Equipment: ABS, Tyre size: 385/65R22.5 Rear axle 1: Tyre tread: 70%; Reduction: single reduction Rear axle 2: Tyre tread: 50%; Reduction: single reduction Rear axle 3: Tyre tread: 40%; Reduction: single reduction Unladen weight: 8,400 kg Payload: 30,600 kg Gross vehicle weight: 39,000 kg Body manufacturer: Schmitz Cargobull Damage: none = Company Information = Heisterkamp Used Trucks BV does not simply sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s demands, and conform to the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: Iijdpeywf T Dofx Acwob - Website:

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain Drive: Wheel Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg CE mark: yes Isdpfxoy Sguxs Acwoib Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-04-14 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: used, mileage: 12,460 km, color: white, lifting height: 35,000 mm, Year of construction: 2009, operating hours: 2,616 h, Drivetrain Drive: Wheel Make of engine: MAN Functional Lifting capacity: 3.000 kg CE mark: yes History Number of owners: 2 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Upper hours: 2616 h Latest inspection: 2026-03-03 Production country: DE Additional information Please contact Michael Overmeer for more information Ijdpey Sgr Djfx Acwoib = Additional options and accessories = - Hook blocks = Remarks = Böcker AK 35/3000 montiert auf einen MAN TGL 7.180 construction year 2009 with only 12.460 km and 2.616 hours. This vehicle is in very nice condition (when not in use, the machine has always been stored indoors) and has been well maintained over the years, last big maintenance at Böcker 12-2025, last big maintenance at MAN 03-2026, invoices available) and has among other things: hydraulically folding support legs, hydraulic jip. MORE PHOTOS TO COME! Changes and typographical errors reserved.

Condition: excellent (used), 3 x 4 trolley retorts from recently closed UK Babyfoods factory. 1300mm models. Complete with trolleys and baskets for cooking / pasteurising pouches. We have the complete contents of this factory available. Iodpfjy I Dh Iox Acwsib

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,843 kg, axle configuration: 3 axles, first registration: 06/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods Iedpfxsy N Alns Acwjib FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/249cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 682 kg 3 axles Pallet rack for 36 Euro pallets

Condition: new, Siemens 6SL3120-2TE15-0AA4 double motor module SN:T-H06211033, unused, 100% functional, delivery as per photos. Ijdpfxjy Nr Nvj Acwsib

Condition: good (used), Year of construction: 2016, load capacity: 1,200 kg, lifting height: 7,150 mm, construction height: 2,900 mm, operating hours: 3,475 h, fuel type: electric, mast type: triplex, Manufacturer & model: STILL EK-X 48 Mast: 3F7150 ID: 26041.5289 Category: Used Mast: 3F Lowered height: 2,900 mm Lifting height: 7,150 mm Capacity: 1,200 kg Platform height: 6,600 mm Picking height: 8,200 mm Cabin width: 1,200 mm Iisdpfx Acsy Itpujwjb Year: 2016 Operating hours: 3,475 h Battery: 48V / 620Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - Induction / wire guidance

Condition: used, mileage: 140,000 km, power: 110 kW (149.56 HP), first registration: 09/2019, fuel type: diesel, empty load weight: 2,170 kg, overall weight: 3,210 kg, axle configuration: 4x4, fuel: diesel, CO₂ emissions: 185 g/km, color: grey, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 5, total length: 5,330 mm, construction height: 1,820 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), soot filter, traction control, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 am - 5:00 pm Sat 10:00 am - 1:00 pm Website: --- Phone: VEHICLE FINANCING & TRADE-IN POSSIBLE TOYOTA HILUX 2.5 D-4D DoubleCab 4x4 with HARDTOP!!! * From first owner - German registration! * Air conditioning (AC), Isdpex U Awbsfx Acwsib * 4x electric windows, * ABS, ESP, * Multifunction steering wheel, * On-board computer * Power steering, * Central locking with remote control, 3x keys, * 4x NEW M+S tires, * Additional heater (PowerHeat) * 4x4 all-wheel drive, * Differential lock, * Original Toyota alloy wheels, * Side steps, center armrest * Truck registration, Double Cab 5 seats, * Large LCD, MP3 CD radio sound system * Fog lights, center armrest, * Full Toyota service history, * New inspection and emissions test!!! * Tow bar (trailer hitch) for up to 3,200 kg! * From first owner – German registration! * Top condition!!! * Vehicle is in well-maintained condition * Please schedule a test drive appointment by phone * Subject to prior sale and errors * Call us!! We speak English. * Financing * Trade-in * More offers available on our homepage