Used Flanging And Dishing Machine Graaf Hvp for sale (70,207)

Condition: good (used), Year of construction: 1964, table height: 800 mm, Flanging and dishing machine GRAAF - HVP 300 Die height 1400 mm Ram size    400 mm Hydro pack 1800 x 1800 x 1200 capacity Kg: 300 Distance between column:1700mm Iiedpfx Abewq Rugs Neb Table Length: 1500mm Table Width: 1500mm Table Height: 800mm Ram stroke: 900mm Approche speed: 4000mm/min. Working speed: 3000mm/min. Return speed: 4000mm/min. Length: 2500mm Width: 1500mm Height: 3840mm Weight: 15000kg

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Iedpfxsxta E Rs Ab Njib Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1980, overall weight: 32,000 kg, total width: 8,000 mm, total length: 6,000 mm, total height: 4,200 mm, sheet thickness (max.): 8 mm, Flanging and dishing machine BOLDRINI - PAO 165 / 4700 Max. workpiece 4700 Ø Isdpsvcy Dcjfx Ab Nsib Maximum sheet thickness 8 mm

Condition: good (used), Year of construction: 1987, sheet thickness steel (max.): 22 mm, throat depth: 4,600 mm, Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Ijdpfx Abjwpkpzs Neib Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg

Condition: good (used), Year of construction: 1975, Forming rolls R30/40/50/60/70/80/90/100 Under power good running order Documentation drawings availebel Max. workpiece: 3000Ø Maximum sheet thickness:12mm Isdpfxjxcnabe Ab Neib Max. dishing radius: R-300mm Min. product Ø: 300 Min. plate thickness: 2mm Min. dishing radius: 20mm Working speed: 0 - 5000mm/min. Power: 30kW Length: 5000mm Width: 1600mm Height: 2800mm Weight: 6000kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Edgebanding and Squaring Line with Bargstedt Loading and Unloading Maximum working width: approx. 2500 mm Processing capability for panels up to 60 mm thick Use of edge banding rolls up to 3 mm The line consists of: - BARGSTEDT TFR 60 Unloader - TD 53/25/12 Panel Turner - IMA COMBIMA CONCEPT /II/500/B/R3 Squaring section (for each side): - Scoring spindle - Chippers - Finish spindle (rectifying) Edgebanding section (for each side): - Release agent application device - Gluing system (hot-melt adhesive + pre-melter) - 6-position roll edge magazine Iodpfx Ajy Sxdreb Njib - Edge pressure zone – roll holder - End trimming unit - Trimming unit - Corner rounding unit - Scraper unit - Glue scraper unit - Brushing unit - Cleaning device - Universal milling unit - Grooving spindle (for grooves and rebates) - Workpiece feed system with conveyor belt - SAG GTV Panel Turner - TBH 22/D Panel Feeding and Loading System Available December 2026

Condition: good (used), Year of construction: 2008, machine/vehicle number: 082429, functionality: fully functional, overall weight: 1,260 kg, year of last overhaul: 2025, Equipment: CE marking, SCM Olimpic K500 – Edge Bander – Year 2008 For sale: SCM Olimpic K500 edge bander, year 2008. Reliable and robust machine, ideal for joinery workshops and industrial production. ✔️ Fully functional ✔️ Ready for use, requires no work ✔️ Always carefully maintained ✔️ Excellent overall condition Iiedpfx Absy Sph Is Nob The machine will be available from June. Perfect solution for those seeking a professional edge bander that is immediately operational. 📍 Inspection and test operation available upon request. 📞 For more information, please do not hesitate to contact us.

Condition: used, Year of construction: 2006, Folding machine with rotating upper beam (straight tool on one side, segmented tools on the other) with the newly installed Prolink control system. Specification: Manufacturer: Göteneds Model: FUTURA 25 Year of manufacture: 2006 Working length: 2 600 mm Bending thickness: 2.5 mm Rear support: automatic 2 000 mm Control system: newly installed ProLink Other features: steel wheels on the rear support, adjustable folding speed, curvature compensation system, quick tool lock, tool height 150 mm. Weight: 4 290 kg. Iiodporx N U Hsfx Ab Nob Delivery: two months after order If you have any further questions, we will be happy to answer them.

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Iijdpfey Sd Uiox Ab Neb Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Ijdpeyq Rkyjfx Ab Njib Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 81500 € 1540.35 € 8 mm 5 mm 80 mm 10 mm 4500 mm 720 mm 95 (R 80) / 35 (R 25) mm 11 kW 4900 mm Iijdpfxeyq Svke Ab Neb 1700 mm 2700 mm 4550 kg incl. flanging rolls for mild steel (R25) incl. cutting blade top and lower roll driven by hydromotor and plantary gear box possible to flange both, flat and crowned bottoms hydraulically adjustable bottom height cutting and flanging on the same head lateral support rolls operator panel with touch screen Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diameter attachement... on request

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 350 mm, roller diameter: 90 mm, Key advantages: clinching technology without rivets – no additional fasteners required, low operating costs, fast and repeatable joining process, intuitive HMI touch screen, compact and robust design, power supply 230 V / 50 Hz, operating pressure 6 bar, easy to use and maintain, perfect for serial and workshop production. Application: ventilation and HVAC, Iedpfx Ajy Rrcrob Nsib metal enclosures, home appliances, automotive, control cabinets, sheet metal components manufacturing. Shaft diameter: 90mm, Throat depth: 350mm, Sheet thickness range (mild steel): 2x 0.5-1.2mm, Press force: 76KN, Power supply: 230V Air pressure: 6 BAR Weight: 500kg

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Ijdpfx Asy Iha Usb Neib Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt incl. 1 pair of rolls Forward/reverse operation via foot switch

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Pre-milling unit Isdpeyziutefx Ab Nsib Gluing unit with glue pot Edge trimming unit Corner rounding unit Edge and glue scraping unit Polishing brushes Control: StarTouch with touchscreen

Condition: used, Year of construction: 2015, functionality: fully functional, sheet thickness (max.): 2 mm, overall weight: 2,600 kg, total length: 1,000 mm, input voltage: 480 V, We offer this used Prinzing BEA2-S riveting and flanging machine, year of manufacture 2015. Type: BEA2-S Material thickness: 1.5 mm Length: 1000 mm Serial number: 1007 Year of manufacture: 2015 Weight: 2600 kg Voltage: 480 V Iijdoy Ev Smopfx Ab Njb Frequency: 60 Hz Power: 19.5 kW Current: 40 A The machine is already disassembled. If you have any questions or need further information, please don't hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Release agent application device Sanding unit Gluing system Edge pressure unit End trimming unit Flush milling unit Corner rounding unit Edge scraper unit Glue scraper unit Iedpfey Ny S Sjx Ab Neib Brush unit Control: Power Control PC 22 Including 1 additional glue pot Only 307,785 meters of edge processed Available end of July

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, TruLaser 3030 L81 – FIBER 4000W Laser on: approx. 13,300 h Machine on: approx. 26,300 h Isdpjyxc D Aofx Ab Noib

Condition: new, Year: 2023 • Type: Robotic pick and place cell • Robots: 2 x Stäubli TS2-80 SCARA robots • Robot reach: 800 mm • Robot payload: 8.4 kg each • Guarding: Full enclosed safety cell • Controls: Integrated control cabinet with HMI • Teach pendants: 2 fitted • End of arm tooling: Vacuum gripper heads fitted • Conveyor system: Infeed/outfeed conveyors included Iedpfxey An Ego Ab Neib • Application: High-speed food/product pick and place

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 2007036, Farros BSA 5185/600 Dish Head Grinding & Polishing Machine (2007) Kombi KS 1200 grinding head 1,000mm minimum grinding diameter Internal and external grinding -20º to +30º grinding head swivel Skid framed receiver mounted air compressor and dust extraction system Iisdpfx Abjy Azb Uj Njb

Condition: used, plate thickness 4,0 mm roll diameter ca. 120 mm throat 450 mm weight of the machine ca. 0,48 t dimensions of the machine ca. 1,3 x 0,8 x 1,8 mm Iisdpfx Asy D A Eqjb Nsb

Condition: used, Edgebander Holz Her Model Triathlon 1486 V straightening glue application Iiodpfx Asy Ep U Esb Njb end trimming unit with 2 motors trimming unit corner rounding unit edge scraper corner rounding glue scraper brushes CE compliant

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 902, overall weight: 125 kg, input voltage: 380 V, type of input current: three-phase, We offer this as new OSTAS KMRP 1.2 crimping and flanging machine, year of construction 2024. Ijdpfx Ajy E Hmhsb Njib Power Motor: 0.75 kW Working Voltage: 380 V Frequency: 50 Hz Roll Speed: 50 rpm Total Weight: 125 kg Year of Manufacture: 2024 year If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW Iedpfxjh Hgdro Ab Noib max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: new, - Capacity 2.5 mm - Hydraulic roller adjustment - Axle length 250 mm - Ejection 160 mm - Roller diameter 96 mm Iijdpfx Abeuray Ss Neb - Foot control - Brake motor - With 4 roller sets - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1979, Format: 920??1300 mm Equipment: Maximum sheet size 920??1300 mm, minimum size 560??1300 mm opening width within frame 920??1310 mm, maximum die size 910??1300 mm maximum die-cutting area 900??1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm Iisdpoy Iu Rtjfx Ab Nob maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t