Used Fliegl Tiefladeanhänger Mit Gerader Plattform for sale (7,352)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Hnjdpszl R S Sjfx Ahzep Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 22,100 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Heavy-duty welded steel low-loader turntable trailer with robust ball-bearing turntable. Folding rear support. Aluminium side underrun protection. Full-width rear mud flap. Quarter mudguards in front of the 1st axle. Extendable loading platform up to 3,000 mm. Integrated storage compartment for timber extension beams. 70 mm timber extension planks included. Two pairs of recessed wheel wells: Front wheel wells behind the gooseneck, approx. 1,600 mm long and 400 mm deep. Rear wheel wells between the axles, approx. 600 mm long and 300 mm deep. Removable steel covers for wheel wells. Main frame spacing approx. 1,280 mm in wheel well area. Lashing Equipment 1 pair of 10 t lashing cut-outs in the gooseneck 4 pairs of 5 t lashing holes in the outer gooseneck frame 7 pairs of recessed 10 t lashing mushrooms Lashing point spacing max. 1,100 mm Recessed stake pockets (70 × 40 mm), convertible to 5 t lashing rings Additional 10 t folding lashing rings on the gooseneck and rear beavertail Drawbar Height-adjustable drawbar with certified 40 mm towing eye. Axles & Suspension SAF drum brake axles Laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption Air suspension with raise/lower valve Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver Braking System Dual-line air brake system Spring parking brake Electronic Stability Program (ESP) Axle load indication via EBS CAN bus Front air couplings with connecting lines Parking sockets for ABS/EBS and air connections 24 V EBS with front connector Trailer Info Module displaying axle loads, mileage and diagnostic data Electrical System Hnodpfx Ahozl Uv Ujzop 24 V full LED lighting LED side marker lights LED number plate light LED front position lights LED rear outline marker lights Parking sockets for electrical connections Extendable illuminated LED warning boards up to 3,000 mm Loading Platform Steel chequer plate on gooseneck Integrated storage box in transition area Approx. 70 mm timber floor Steel chequer plate over wheel wells Rear beavertail with 70 mm timber decking Total low-bed deck length incl. beavertail: 6,500 mm Loading Ramps Hydraulic steel loading ramps Length: 3,000 mm Width: 750 mm Side-adjustable Foldable lower ramp locking system Mega Grip serrated grating surface with chequer plate ramp tips Hydraulic operation via tractor PTO with flow restrictor Hydraulic connection with SVK coupling (NW 10/3)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33001012559, empty load weight: 6,250 kg, maximum load weight: 17,750 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,620 mm, loading space width: 2,520 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: black, Fliegl 3-Axle Low Loader Trailer Chassis – Low Loader Trailer Heavy-duty welded steel chassis construction Turntable steering with heavy-duty ball-bearing slewing ring Hnedpfxezaznze Ahzep Folding rear support legs 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap (not compatible with forklift bracket) Semi-circular mudguards Anti-spray mudflaps on the 1st axle and behind the 2nd and 3rd axles Lockable plastic toolbox with shelf insert (620 × 360 × 440 mm, W × H × D), padlock not included Extendable outriggers for overall loading width up to 3,000 mm Central storage compartment for timber extension planks 70 mm timber extension planks for widening to 3,000 mm Lashing Equipment Heavy-duty lashing points specifically designed for low-loader applications 1 pair of recessed lashing cut-outs in the front gooseneck, each rated at 10 tonnes 4 pairs of lashing slots in the outer frame for lashing straps, each rated at 5 tonnes 7 pairs of recessed mushroom lashing points (top and side mounted), each rated at 10 tonnes 1 pair on the gooseneck 6 pairs in the low-bed section First lashing point positioned 250 mm from the front Last lashing point max. 250 mm from the rear Maximum spacing between lashing points: 1,100 mm 5 pairs of recessed lashing rings in the outer frame, each rated at 5 tonnes (convertible to stake pockets) 2 additional pairs of folding lashing rings, each rated at 10 tonnes 1 pair on the gooseneck 1 pair recessed behind the rear axle 1 pair of heavy-duty bolted lashing rings (JDT type), each rated at 6.7 tonnes, with reinforced flange plate and threaded counter support, mounted on the gooseneck Drawbar Drawbar with certified 40 mm towing eye Parking sockets for electrical, ABS and air connections integrated into the drawbar Axles & Suspension SAF drum brake axles Laser-aligned axles and suspension for reduced tyre wear and lower fuel consumption Air suspension with raise-and-lower valve Front and rear air suspension circuits operated independently Wheels & Tyres 235/75 R17.5 Fulda tyres Twin wheel configuration 6 inner steel rims 6 polished aluminium outer rims Braking System Dual-line compressed air braking system Spring-loaded parking brake Trailer Info Centre displaying operating data including axle loads (not legally calibrated) and mileage Vehicle Stability Control System Axle load detection via EBS CAN bus for display in the truck dashboard (truck preparation required) Two non-interchangeable front coupling heads with connecting hoses to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable Front gooseneck with steel chequer plate flooring Integrated storage box in the transition ramp area 70 mm larch timber decking behind the gooseneck Steel chequer plate flooring over the wheel arch section Rear loading ramp area with 70 mm larch timber decking Low-bed loading deck including rear incline: 6,500 mm Loading Ramps 2 heavy-duty steel loading ramps Foldable lower ramp locking system to prevent lateral movement Timber-covered ramp surface Spring-assisted lifting mechanism for easy handling

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 15,600 kg, maximum load weight: 8,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Chassis Steel welded construction 1 pair of wheel recesses embedded in the steel platform in the wheel arch area, angled for access, length at the bottom approx. 1400 mm, approx. 400 mm deep. Frame in the main beam area is 400 mm higher than the wheel recess. If machines are to be transported where the overall height needs to be checked, please provide the technical data sheet of the machine types with precise details (if the overall height is exceeded -> customer's risk, approval required). Depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer. Turntable with robust ball bearing race, storage box embedded in the turntable extension. Foldable rear support. 2 chock blocks with holder. Aluminum side impact protection. Splash guards at the rear, covering the entire width. Extendable widening elements to 3,000 mm (not in the rear slope). (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm.) Storage compartment for wooden planks in the center of the loading area. Wooden planks 70 mm for widening to 3000 mm. Tie-down eyes, low loader 110 3 pairs of tie-down points, each with 10 tons capacity, integrated in the floor at the front. Includes 6 pairs of tie-down rings embedded on top and on the side in the outer frame, each with 10 tons capacity. Hnsdpfx Ahji Ri Ryjzsp 1 x in the neck area. The remaining ones are distributed in between, with a distance of no more than 1200 mm. 1 x rear slope. 5 pairs of pocket slots embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 tons ring tie-down eyes, not included in the scope of delivery). Coupling device, trailer turntable. Drawbar with tested 40 mm drawbar eye. Axles + Suspension SAF drum brake axles. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearing. Braking system 2-line compressed air braking system. Color-coded line routing for easy servicing. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle. ABS and ALB, with ABS plug at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Wheels & Tires 235/75R17.5, according to manufacturer's choice. Steel rims in twin configuration, factory silver. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red side marker lights at the rear. 2 x 7-pole fail-safe plugs at the front, with connection cable. 1 LED rotating beacon with holder, switched via the sidelights (beacon can be removed). 2 pairs of warning panels, double LED-illuminated and extendable to 3,000 mm. Floor Front area, steel floor, included. Thereafter with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering. Rear slope with 70 mm soft wood floor. Low loader platform including rear slope 8,200 mm. Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable. Covered with wood. With spring-assisted support. Operating instructions At 10,000 kg axle load, an exception permit is required, only indivisible load is possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while observing the permissible axle/support and saddle loads. Country of registration/sign

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis Steel welded construction Turntable with robust ball bearing race Foldable rear support 2 wheel chocks + holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle 1 pair of wheel recesses embedded in the low-bed area in front of the 1st axle, angled for entry, approximately 1600 mm long at the bottom, approximately 400 mm deep. Note: Frame in the main beam area is 400 mm higher than the wheel recess. 2 pairs of wheel recesses embedded in the low-bed area between the axles, angled for entry, approximately 600 mm long at the bottom, approximately 300 mm deep. Note: Frame in the main beam area is 300 mm higher than the wheel recess. Hedpfxei Ri Rvo Ahzenp Extensible widening to 3,000 mm (not in the rear slope) Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-bed trailer 1 pair of tie-down cutouts embedded in the longitudinal beam at the front in front of the 1st axle, each 10 tons. 4 pairs of tie-down holes in the outer frame, each 5 tons. 7 pairs of tie-down eyes embedded on the top and side in the outer frame, each 10 tons. 1 x at the front in front of the 1st axle 6 x in the low-bed First tie-down eye 250 mm from the front and last max. 250 mm from the rear, distance between tie-down eyes not greater than 1100 mm Coupling device, trailer turntable Tow hitch with tested 40 mm tow ball Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and tires 235/75R17.5, according to manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon can be removed) 2 pairs of warning signs, double LED-illuminated and extensible to 3,000 mm Floor Front slope with steel/diamond plate covering Storage box embedded in the drive-over slope to the front slope, then with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-bed platform including rear slope 6500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood With spring-assisted support Operating instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) Registration country/Signs Registration country: Germany With DEKRA acceptance and certi

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Hedpei Ri Hrjfx Ahzsnp Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Lift axle * Toolbox * BPW Eco Plus axles with disc brakes Hnjdpfx Asvhvcfjhzep ----* Tire size: 385/55R19.5 * Total length: 13,850 mm * Unladen weight: 6,067 kg * TÜV & SP: expired -----Subject to errors & prior sale Vehicle number 5726 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, maximum load weight: 28,933 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2015, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire size: 385/55R19.5 * Overall length: 13,850 mm Hedpfovhv H Rjx Ahzonp * Own weight: 6,097 kg * TÜV & periodic inspection: expired -----Subject to errors and prior sale Vehicle number 5732 WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, maximum load weight: 28,410 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2012, loading space length: 13,600 mm, loading space width: 2,400 mm, loading space height: 700 mm, FLIEGL flatbed semi-trailer with drop sides and 3 axles Payload: 28,410 kg TYPE: SDS350 Brakes: disc Axle: BPW + air suspension 2x landing legs (JOST) Length: 13.60 m Width: 2.40 m Height: 0.70 m We are also happy to assist you with financing/leasing through our partners. Hnjdpfxswgghns Ahzop All information without guarantee. Subject to errors and prior sale.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,950 kg, maximum load weight: 23,050 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, total length: 9,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis – Central axle trailer design Fine-grained steel welded construction Gear-supported front leg Hydraulic rear supports Wheel chocks with holder Aluminum side impact protection Without under-run protection Mud flaps at the rear, covering the entire width Mud flaps in front of each axle and anti-splash mud flaps behind each axle Plastic tool box, with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening elements to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3,000 mm Tie-down points for low-bed trailers Recessed ring-type tie-down points in the outer frame, each rated at 5 tons (can be converted to stake pockets) Tie-down eyes at the top and on the sides in the outer frame, each rated at 10 tons Towing device – Central axle trailer Drawbar with a tested 50 mm tow hitch Axles + Suspension Drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Last axle with trailing arm steering, with automatic reversing lock controlled via the reversing light, and an additional locking function on the vehicle via a manual button. Hedpfx Ahozcv D Nezsnp Air suspension 1st axle – automatic lift axle, additionally manually lowerable, operable with a button on the vehicle Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle height in conjunction with the lift axle; when the lift axle is raised, the loading or overall height increases by 50 mm Vehicle – Driving stability system Trailer Info Center for displaying vehicle data such as axle loads, mileage, and diagnostic/system messages Axle load detection via EBS-CAN bus signal for display on the display in the cab Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin fail-safe plugs at the front, with connection cable Additional LED work light at the rear LED rotating beacon with mount Warning signs, LED illuminated and extendable to 3,000 mm Floor Subsequently with 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Low-bed platform including rear slope 7,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood Hydraulically operated via towing vehicle’s auxiliary drive with throttle, operation on the left side in the front Hydraulic lateral adjustment of the ramps, individually controllable Hydraulic connection with quick-release coupling NW 10/3, including connection hose Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,995 kg, maximum load weight: 16,005 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 8,450 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Center-Axle Trailer Fine-grained steel welded construction 2-speed gear-supported landing leg at the front Folding rear support 2 jockey legs with holder Aluminum side impact protection Splash flaps at the rear, spanning the entire width Quarter panel fenders in front of and behind each axle with anti-spray splash flaps according to EC regulations 1 aluminum storage box with stainless steel flap Container locking mechanism, 1 pair of recessed locking recesses in the floor for 1 x 20 ft container, 1 pair of container locking adapters Extendable widening sections to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3000 mm Tie-down points, low-bed trailer 1 pair of tie-down brackets additionally at the front in the front cross member, 10 tons each 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) 7 pairs of tie-down cleats recessed on top and on the side in the outer frame, 10 tons each Coupling system, center-axle trailer Drawbar with tested 50 mm tow hitch Axles + Suspension Drum brake axles, according to the manufacturer's choice "Axle/chassis laser aligned" reduces tire wear and fuel consumption Axle distance 1810 mm Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Parking sockets for ABS/EBS and air connection on the drawbar or drawbar 24 Volt EBS, electronic braking system with EBS connector at the front with lift and lower valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the cab "TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the display in the towing vehicle, via EBS Wheels and Tires 235/75 R17.5, manufacturer's choice Protective caps for wheel studs Electrical System 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side, coupled with the turn signal "Flashing side marker lights" Premium LED side marker lights, with "20 LED diodes per light" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connection cable Parking sockets for electrical system on the drawbar LED work lights on both sides 2 additional LED work lights at the rear 1 LED rotating beacon with holder, switched via sidelights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Hnjdpezcvt Rsfx Ahzjp thereafter with approx. 70 mm soft wood flooring, in the wheel arch area steel/diamond plate flooring Rear inclination with "Mega Grip surface" made of interlocking grating Low-bed area including rear inclination 6,500 mm Front panel / corner posts Aluminum profile, approx. 400 mm high, plug-in Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Ramp surface with "Mega Grip" made of interlocking grating Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left side Hydraulic side displacement of the ramps, individually controllable Hydraulic connection with quick-release cou

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 8,685 mm, total width: 2,550 mm, total height: 3,970 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center axle trailer Fine-grained steel welded construction Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened! "Vario-Lash" lashing rings for use in the "Load-Lock profile", 2.5 tons each, loose Gear-supported front legs, with a straight lower part and single-sided operation on the right Telescopic rear support Retractable ladder at the rear Door latch on the side Chocks with holder Aluminum side impact protection Steel underrun protection Quarter panel fenders in front of and behind each axle Rear impact protection Plastic toolbox with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Coupling device for center axle trailer, according to customer requirements Axles + Suspension Hjdpfx Ahjzcqh Nozjnp SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle EBS, electronic braking system with EBS plug at the front, with connection cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle – driving stability system Wheels and tires 385/65 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length approx. 6,900 mm Front bulkhead / corner posts at the front 2,580 mm high, steel corner posts in a full-volume design, release mechanism for side tarpaulin on the front bulkhead Center posts Sliding posts, can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom Insertion slats Rows of aluminum V-insertion slats Rear bulkhead / corner posts at the rear Rear corner posts, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioner Rear portal doors, 2-wing, each with 2 internal rotating bar locks Tarpaulin Tarpaulin with welded horizontal and vertical straps Tensioners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Fixed roof with tarpaulin and bows, tarpaulin color: white Optimal rain gutter at the rear, at the top of the end bow, above the doors Registration country / signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Load securing certificate according to EN 12642 XL 24/7 service hotline prepared for license plate holder, single row Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels) Reflective strips: red, around the rear portal *also available as a drive-through version Customized transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Type: TPS 118 Logistics Semi-Trailer Chassis: Central Axle Trailer Outer frame slightly inclined, new design with "Load-Lock profile" for securing tie-down straps 2-speed gear support leg at the front Plastic toolbox Platform height: 1080 mm Coupling: Central axle trailer Drawbar with tested 40 mm drawbar eye, logistics version Drawbar mechanically adjustable in height via threaded spindle, below floor level, max. adjustment range 200 mm Drawbar mechanically adjustable in length from approx. 1950 - 2300 mm, can be mechanically locked at approx. 50 mm intervals, drawbar length set to approx. 2100 mm Axles & Suspension SAF/BPW axles, selectable by the manufacturer "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking System 2-line pneumatic braking system Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle 24 Volt EBS, electronic braking system with EBS plug at the front, with connection cable with raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 4x 235/75 R17.5, brand selectable by the manufacturer 4x steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length: approx. 7,300 mm Superstructure Front wall / corner posts at the front Through-loading system with front portal doors, 2-leaf, each with 2 internal rotary bolt locks, corner posts made of steel, release mechanism for side tarpaulin Ramp, approx. 2,400 mm wide, 1 x divided, approx. 350 mm long for resting on the tailgate, load capacity approx. 1,800 kg, incl. support for the tailgate (drawbar length then approx. 2100 mm, for tailgate length of 1800 mm, the coupling offset from the truck must be at least 20 to max. 240 mm). Note! Usable internal length is reduced by the ramp! Side Walls Center Rails 2 pairs of sliding rails that can be moved along the entire length, with 4 pockets and a long pocket at the bottom Insert strips Hnjdpfozcp E Tsx Ahzsp 5 rows of wooden insert strips (in combination with side walls, 4 rows) Rear Wall / Corner Posts at the Rear Corner posts at the rear made of steel, extending to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf, each with 2 internal rotary bolt locks Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning fasteners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Sliding tarpaulin, rear end lift that can be folded up, with the tarpaulin sliding from back to front, tarpaulin color: white Optimal rain gutter at the rear, above at the end beam, above the doors Country of Registration / License Plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Fliegl manufacturer certificate for the structural strength of the superstructure according to EN 12642 XL prepared for single-line license plate holder Reflective strips: white, continuous on the bottom of the side tarpaulin and at the top in the corners Reflective strip

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Hodji Rixkepfx Ahzsnp Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental----- Hsdpfx Ahsvzk Najzonp

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Hsdei Ri R Sspfx Ahzenp Type Approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts Hedjzb Iu Depfx Ahzsnp 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! Hnedpfji Ri Szex Ahzep 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader Hsdpfxei Ri Hgs Ahzsnp 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front Hodpfxoi Ri Hco Ahzonp With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3,000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting, rotating beacon = price: ¤ 800, widening to 3 m = price: ¤ 100 hydraul. Surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1,100 ¤, hydraulic 1-piece ramps 500 ¤, also with 8.10 m loading area length + widening in stock, , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hnedpfjzl T A Hsx Ahzjp

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Hsdpfx Ahjzl T Ayozjnp

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Hedpozl Tziefx Ahzjnp

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, with axle load indicator, loading platform length 8,200 mm, loaded height approx. 900 mm, 20 lashing rings each 10 t, 14 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable ramps, spring assist for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or ratchet straps, contour marking according to regulations, spring-actuated parking brake, vehicle hot-dip galvanized, incl. axle load indicators. Surcharges for: Warning panels + lighting + beacon = Price: €800, Hnedpfxjzl Ty Ee Ahzjp Widening to 3 m = Price: €1,100, hydraulic one-piece ramps €500, hydraulic ramp displacement? = Price: €1,000, digger shovel recess = Price: €1,000, Also available with 9.20 m loading platform length from stock. -- Subject to typographical errors, mistakes and changes, sample images -- More details available on request!

Condition: new, overall weight: 20,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, with axle load indicator, loading platform length 8,200 mm, loaded height approx. 900 mm, 20 lashing rings each 10 t, 14 stake pockets in the outer frame, loading ramps (approx. 3,000 x 750 mm), climbing strip on the outside of the ramps and rear slope, laterally adjustable ramps, spring assist for one-piece ramps, 70 mm thick wooden floor, storage box with lid for lashing chains or ratchet straps, contour marking according to regulations, spring-actuated parking brake, vehicle hot-dip galvanized, incl. axle load indicators. Surcharges for: Warning panels + lighting + beacon = Price: €800, Widening to 3 m = Price: €1,100, Hnsdpfxjzl A Tzo Ahzjp hydraulic one-piece ramps €500, hydraulic ramp displacement? = Price: €1,000, digger shovel recess = Price: €1,000, Also available with 9.20 m loading platform length from stock. -- Subject to typographical errors, mistakes and changes, sample images -- More details available on request!