Used Flygt Flygt Ready 4L for sale (9,416)

Condition: excellent (used), functionality: fully functional, For sale: a FLYGT Ready 4L submersible pump, designed for draining basements, sumps, and flooded areas. Maximum flow rate according to the provided data: up to 14,400 liters per hour (14.4 m³/h / 240 l/min). The pump is equipped with a Storz-type discharge connection, a power cord with a plug, and a carrying handle. Kdsdpfx Aez Sy D Njg Asu Used condition, with visible signs of wear, scratches, and dirt. The set includes the pump and accessories as shown in the pictures.

Condition: used, functionality: unexamined, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Kdsdez S Nbwepfx Ag Asu Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Kdsdpfx Aez R T Eljg Aeu Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Condition: used, functionality: unexamined, For sale: Flygt 2051.160 submersible pumps, designed for water pumping and drainage applications. Maximum capacity is 18 m³/h, which equals 18,000 liters per hour or 300 liters per minute. Actual capacity depends on the lift height and operating conditions. The stated price applies to one unit. The three pumps shown in the pictures are sold separately. Technical specifications: Manufacturer: Flygt Model: 2051.160 Maximum flow rate (Qmax): 18.0 m³/h – 18,000 l/h Power: 1 kW Rated voltage: 380/220 V Kdodoz S Ikwspfx Ag Aju Connection: star/delta Rated current: 2.4/4.1 A Three-phase motor Frequency: 50 Hz Rotational speed: 2850 rpm Operating mode: S1 – continuous operation Power factor cos φ: 0.89 Insulation class: F Weight: approximately 25 kg Manufactured in: Sweden Equipment: Carrying handle Lower suction basket Side discharge nozzle with hose connection Power cord The pumps are used, with visible signs of wear, dirt, and paint coating damage. The visual condition and equipment are shown in the pictures. The item for sale is one pump. Price per unit.

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A Kdsdpfxsz Sva Ho Ag Aou - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Keyence VL-500” 3D co-ordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features incl. software incl. VL-H2P add-on software incl. VL-H2G add-on software incl. laptop for operation incl. calibration plate Ready for immediate use Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! Kjdpfx Agsz N Akgj Aodu A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, Year of construction: 2005, Press capacity approx.: 3200 kN Bending length approx.: 4280 mm Kdedpfxoz R Rgas Ag Aou Distance between side frames: 3760 mm Control: Operateur 2000 Term hydraulic: 37900 h Length: 4670 mm Width: 2170 mm Height: 3095 mm Stroke: 350 mm Weight of machine approx.: 24000 kg Standard configuration 7-axis-backgauge

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2003, total length: 11,240 mm, total width: 1,900 mm, wheelbase: 880 mm, color: other, = Additional options and accessories = - Spare tire = Remarks = Damages: none XL919629135075522 = More information = Year of construction: 2003 Empty weight: 4.900 kg Carrying capacity: 3.100 kg GVW: 8.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: OH-15-HL = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Kdedpfx Ajynh Ikeg Aou IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), functionality: fully functional, overall weight: 400 kg, We sell directly. Make-Ready Table for Bobst 106 E/ER We offer a professional table for the pre-preparation and alignment of die-cutting tools, as well as a cleaning section located outside the die-cutting machine. This device reduces the machine setup time (make-ready) of the Bobst machine by up to 30-40%. Technical data and specifications: Compatibility: BOBST 106 E /ER (SP / Novacut / Visioncut / SPeria series) Working format: Max. sheet format 1060 x 760 mm. Basing system: Fully compatible with the Centerline II system (fast and precise tool centering) Construction: Stable, steel frame with an ergonomic work surface and shelves for accessories/frames Included equipment: Basing strips and millimeter scales Clamping system Additional elements - additional frames (without the tools visible in the pictures, i.e., pins and telescopes) Technical condition: Condition: Excellent, 100% technically sound, locking mechanisms operate smoothly. Location of the device: Dąbrówka / Poznań, Poland Logistics and delivery Delivery terms: EXW (self-collection by the Buyer) / Possibility of arranging transport at the Buyer's expense. Kedpfxezuwazo Ag Aedu Availability: Immediate (the table is secured and ready for loading).

Condition: ready for operation (used), Year of construction: 2014, operating hours: 16,240 h, functionality: fully functional, machine/vehicle number: 99B021, spindle bore: 42 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 42 mm, Equipment: documentation/manual, We offer this ready-to-use Goodway SW-42 automatic bar lathe, manufactured in 2014. Manufacturer: Goodway Model: SW-42 Year of manufacture: 2014 Condition: ready for use Category ID: 1142 Type ID: 1081 Type: Automatic bar lathe Turning diameter over bed: 42 mm Turning diameter over cross slide: 42 mm Turning length: 110 mm Control: FANUC 31 and model B Spindle speed: 25 - 6000 rpm Spindle: 5.5 / 7.5 kW Spindle bore: 42 mm Total drive power: 25 kVA Weight: 3.3 tons Kjdpfx Agoyuu U Dj Aodu Space requirements Approx. LxWxH: 2.95 x 1.55 x 2.15 m 7 axes (X, Z, Y, C, Z2, X2, C2) 5-axis tool holder 20 x 20 mm 5-axis drill chuck 4 cross drills, powered, max. 6000 rpm 4 reverse machining units, powered, max. 5000 rpm Chip conveyor, high-pressure coolant system Parts conveyor belt Dismantling and loading costs 500€ If you have any questions or require additional information, please send us a message or call us. +48 602 459 621

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Ksdpfx Agsy Iaa Tj Asdu Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 89257, saw blade diameter: 450 mm, cutting height (max.): 150 mm, cutting width (max.): 250 mm, type of input current: three-phase, year of last overhaul: 2024, table length: 25,000 mm, A woodworking company in Latvia is offering a Weinig Dimter OptiCut 304 L optimization cross-cutting line for sale. The machine has had only two owners, both of which are well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated on one shift. It is equipped with 5 sorting cylinders; however, the sorting conveyor can be extended, and additional sorting cylinders can be installed if required. The machine can be inspected and demonstrated in operation at our facility. Kjdpfx Aez Arqkjg Aodu Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity, profitability, and high-quality optimization results. The machine operates with excellent accuracy. No modifications have been made to the original factory configuration. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig finger-jointing line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information, or additional images and videos can be made available.

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. Kdedpfxoyitvpo Ag Asu - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: excellent (used), Track width: 25 cm Cutting height: 10 cm Engine: 22 kW Kdedpfx Agey S Rpmo Aeu Ready for immediate use.

Condition: used, This listing is for an ÄKTA ready™ Chromatography System The unit is in full working condition and is ready for immediate release The ÄKTA ready™ Chromatography System is a single‑use liquid chromatography platform engineered for bioprocessing, process scale‑up, and GMP‑regulated manufacturing of biologics, including monoclonal antibodies, recombinant proteins, viral vectors, nucleic acids, and other sensitive therapeutic products. Key Characteristics - Single‑use disposable flow paths — eliminate the need for cleaning and cleaning validation between runs, reduce downtime, and minimize cross‑contamination risk. Kjdpjyhhgaofx Ag Asdu - Flexible operation — available in multiple configurations (isocratic, gradient, variable UV, extended) to match different purification needs. - Scalable platform — flow kits for low and high flow rates support a wide range of process volumes; systems scale from small‑batch purification to larger process requirements when paired with larger ÄKTA ready™ XL models. - Designed for GMP environments — extensive documentation and regulatory support help meet compliance demands in regulated biopharmaceutical production

Condition: excellent (used), mileage: 763,365 km, power: 338 kW (459.55 HP), first registration: 01/2019, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 960 l, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,770 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, spoiler, tachograph, traction control, trailer coupling, = Additional options and accessories = - Adaptive cruise control - Alarm system - Aluminum fuel tank - Outside temperature gauge - Heated mirrors - Co-driver's seat - Hands-free system - DAB radio - Sunroof - Roof spoiler - Differential lock - Digital tachograph - High beam headlights - Speed limiter - Air conditioning - Air suspension - Air horn - Radio/CD player - Sleeper cab - Side door - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system = Additional information = General information Year of construction: 2019 License plate: 58-BLH-4 Kdjdpozvp Nksfx Ag Aeu Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55 R 22.5; Max. axle load: 7500 kg; Steered; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle: Tire size: 295/60 R 22.5; Double tires; Differential lock; Max. axle load: 11500 kg; Tire tread depth left inside: 30%; Tire tread depth left outside: 30%; Tire tread depth right inside: 30%; Tire tread depth right outside: 30%; Reduction: single reduction Weights Unladen weight: 8,024 kg Payload: 10,976 kg GVW: 19,000 kg Interior Number of seats: 2 Maintenance, history and condition APK (technical inspection): valid until 01.2027 Technical condition: very good Optical condition: very good

Condition: excellent (used), operating hours: 12,705 h, axle configuration: 4x4, power: 265 kW (360.30 HP), fuel type: diesel, first registration: 06/2008, color: other, tire condition: 80 %, number of seats: 2, gearing type: automatic, Equipment: air conditioning, = Additional options and accessories = - 1 fuel tank - ABS - Armrest - Day Cabin - Hub Reduction - Hydraulics - PTO - Radio - Sper - Thick Axles = More information = General information Year of construction: 2008 Cab: day Technical information Engine capacity: 7.145 cc Drivetrain Drive: Wheel Axle configuration Kdjdpoz Rzhyefx Ag Asu Brakes: drum brakes Front axle: Differential lock; Steering; Tyre profile: 80%; Reduction: hub reduction Rear axle: Double wheels; Differential lock; Tyre profile: 70%; Reduction: hub reduction Weights Empty weight: 10.000 kg Carrying capacity: 3.350 kg GVW: 13.350 kg Max. towing weight: 40.000 kg Functional Quick coupler system: Yes Condition Technical condition: very good Visual appearance: very good Financial information Ask about the lease options

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMGATE, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 52 Tandem Emboss Machine is "embossing ready" - including a unique embossing module. Various embossing patterns/rolls available. New, Manufactured 2024 Specifications: Max. production speed: 25 m/min (2121 B2 sheets/h) Max. output of the feed. head: 8000 sheets/h Min. sheet size: 20 × 20 cm Max. sheet size: 56 × 80 cm Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0), Max 1.4 mm (with overlap < 0) Max. paper pile height: 52 cm Thickness of laminating film: 24-50 µm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: Approx. 4 min Sheet overlap accuracy: ± 1 mm Machine dimensions (incl. delivery desk): 3.07 x 1.13 m Consumption of compressed air: 65 l/min Max. consumption of compressed air: 95 l/min Max. pressing force: 15 kN Max. consumption of electricity: 7 kW Machine weight: 820 kg Recommended machine capacity: 100 000 sheets/month Machine Characteristics Comes out of the well-known and proven concept of the Amiga laminator. Thanks to modular design, the embossing module is in fact “inserted” between the laminating unit and separator of standard Amiga. The solution, with two processing units in a row, makes it easy to switch from standard single side lamination to embossing, which creates a special pattern on the laminated surface. 7 standard patterns available. Special patterns on demand. First unit for lamination is always activated and works with IR heated cylinder. Second unit is activated only when embossing is needed. The pattern is created due to sheet preheating before the processing unit and high pressure of PUR roller pressed to the structured cylinder. The cooling of the embossing cylinder helps to "freeze" the pattern to the laminated substrate. Basic configuration Feeder: Komfi single action feeding head. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Additional separation adjustable blowers for reliable separation of sheets from the pile. Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwind air expansion shaft for 3″ reel core. Adjustable spread roll for perfect smoothing of difficult film before lamination roller. IR heating for laminating cylinder. Temperature sensor inside the cylinder for extremely precise regulation. Rubber coated pressure roller for laminating unit, PUR pressure roller for embossing unit. Embossing Unit: Sheet preheater in front of the embossing roller to activate surface before embossing occurs. Powerful pneumatic pressure system to ensure excellent laminating and embossing result. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in perforator to enable sheet separation, placed behind pull rollers to avoid web brakes. Kdedpfxsziavuj Ag Aou Cam driven separation roller. Skewing wheel for fine adjustment of snapping to avoid film flagging. Adjustable speed of snapping roller for perfect separation of difficult jobs. Fixed delivery desk.

Condition: ready for operation (used), Year of construction: 2011, pressing force: 224 t, stroke length: 350 mm, overall weight: 18,000 kg, This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Stability and robustness ensured by the heavy machine weight. • Reliable construction for long-term performance. Technical Machine Benefits • Power supply: number of phases: 3 Kdedpfx Agszvvxle Asu • Versatile stroke to accommodate various bending requirements. Technical Specification Bending Length 4000 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 55, working width: 600 mm, compressed air connection: 6 bar, type of input current: AC, total width: 2,250 mm, total length: 7,220 mm, total height: 1,840 mm, stack height: 500 mm, overall weight: 3,000 kg, Equipment: CE marking, PERONDI C800 laminating machine and PERONDI R4L 600 in good condition, available for sale. The sale also includes the following equipment, providing a complete and versatile production setup: Hot-melt glue system Feeder Vacuum belt Pressing rollers Kedpfx Agoz Hm Ntj Asdu All included equipment has been part of the production setup and is offered together with the machines. The equipment has been well maintained and carefully operated and is in good condition. Machine highlights: Manufacturer: PERONDI Good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment This is an attractive opportunity to acquire a well-maintained PERONDI C800 and PERONDI R4L 600 laminator with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: used, Year of construction: 2010, Loading silo for asphalt mixes 270 tons with bucket conveyor - separate loading silo for various asphalt mixes - capacity: 270 tons - with bucket conveyor and bucket Kedpfx Agov H R Tpj Asdu - can be attached to any existing system - control system

Condition: like new (used), Year of construction: 2023, operating hours: 4,837 h, functionality: fully functional, total length: 17,400 mm, total width: 1,970 mm, total height: 1,870 mm, cutting range round steel at 90°: 200 mm, type of input current: three-phase, overall weight: 2,300 kg, input voltage: 380 V, cutting range square steel at 90°: 200 mm, length stop: 8,000 mm, Equipment: documentation/manual, We are offering this like-new Jih-I Machinery JIH-NC24L circular saw for non-ferrous metals and aluminum, manufactured in 2023. Model: JIH-NC24L Serial number: N24L022C056 Date of manufacture: 20220826 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Power: 15 HP Kdodpfx Aszzp Epjg Aju 8-meter infeed table 6-meter outfeed table If you have any questions or would like more information, please feel free to send us a message.

Condition: used, mileage: 330,360 km, power: 175 kW (237.93 HP), first registration: 05/2019, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2027, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,470 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 97005A Refrigeration unit Thermo King T-800 R Next refrigeration unit service: 07/2027 Standby and driving cooling Total hours: 5484 hours Internal dimensions L: 6.20m W: 2.47m H: 2.35m BÄR 1500 kg tail lift Equipment lines and packages * L1Y LED lighting package Exterior * D8A Roof hatch/ventilation flap, roof * G1D Transmission G 90-6/6.70-0.73 * K0G Fuel tank: 180 liters, plastic * L1C LED daytime running lights * M5U Engine brake * C2J Wheelbase 4220 mm * F1X S-cab ClassicSpace, 2.30 m, tunnel Interior * D1C Driver's air suspension seat, comfort * D4W Electric window lift Comfort and Environment Kdsds Aa Ennjpfx Ag Asu * I6X Suspension: leaf spring / air * S5Z Speed limiter (cruise control) * G5G Mercedes PowerShift 3 * M5M Engine version Euro VI, with OBD-C * S1H Lane keeping assist * S1D Stability control assistant (ESP) * F8E Central locking with remote control Safety * S1P Active Brake Assist Other * M2A Engine 7.7 L - 175 kW R6 Diesel (OM 936) Other: This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily rate. The currency of the vehicle location applies.

Condition: good (used), functionality: fully functional, Velox 350 crosscut saw with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kW, 380 Volt 2 speeds Double mitre cuts possible Kdsdpfx Agot Ta Ure Aju Transport available at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Year of construction: 2018, condition: good (used), Bagging line consisting of Incline Conveyor with Flights and product speed control Weigher 4 Dispensing Buckets Ksdpfx Agoinbhto Aodu PLC Controller for complete system In good working order