Used Force Gauge for sale (7,601)

Condition: used, machine/vehicle number: 0901666, Force measuring device, force measuring device, calibration, force measuring technology, load cell Iodpfecdcn Hex Anwoic -Manufacturer: Johann Rein -Type: 1Mp -Dimensions: 190/290/H130 mm -Weight: 4.5 kg

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 71267, total width: 500 mm, total length: 500 mm, total height: 500 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring volume: 1,200 mm Accuracy: 0.015 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): approx. 500 x 500 x 500 mm Weight approx.: 20 kg Isdpfx Ajzb A Dtjnweic EQUIPMENT Laptop and software (completeness not guaranteed) Transport case Note: The red base frame on which the laptop is placed is not included in the offer.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Iisdpjzdn H Rjfx Anwjc Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Measuring gauge Iiodpfx Anjy Ipbmewoc Manufacturer: Micro-Maag Model: B2 40-100 Stock number: (28690) Measuring range: 40 - 100 mm in 2 mm steps per test gauge 1 test gauge DM 74-76 mm is missing Very precise measurements possible, as measurement is taken at 6 points. Measuring depth approx. 800 mm Transport case dimensions: Width: 505 mm Depth: 340 mm Height: 260 mm Weight: 29 kg

Condition: good (used), Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker Isdpfx Anjzcwqdjweic -Manufacturer: Carl Mahr, altimeter -Max. working height: 550 mm -Dimensions: 220/70/H635 mm -Weight: 2.2 kg

Condition: excellent (used), Binder FD 53 Drying Oven / Heating Cabinet Manufacturer: Binder Type: FD 53 Year of manufacture: 2014 Made in Germany Drying oven / heating cabinet with forced air circulation for laboratory, research, quality assurance, material testing, and industrial applications. Technical data Internal volume: 53 liters Temperature range: approx. +5 °C above ambient temperature to 300 °C Internal dimensions (W x H x D): approx. 400 x 400 x 340 mm External dimensions (W x H x D): approx. 635 x 620 x 690 mm Load per shelf: 15 kg Maximum total load: 40 kg Empty weight: approx. 44 kg Power connection: 230 V Frequency: 50 / 60 Hz Rated current: 5.3 A Rated power: 1.2 kW Protection class: IP20 Equipment Forced air circulation system Digital temperature display Electronic temperature control Safety temperature limiter according to DIN 12880 Stainless steel interior Multiple shelf levels Robust laboratory design Inspection / Calibration DGUV V3 inspection performed on: 28.07.2023 Calibration performed on: 28.07.2023 Inspection and calibration stickers are attached to the device. Condition Used equipment. Device can be switched on, temperature display is active. Signs of wear and tear due to age and use. Optical condition as shown in the pictures. Scope of supply: see pictures. The table shown in the pictures is not included in the sale. Iijdpszcwxzefx Anwsc Shipping possible. Errors and omissions excepted.

Condition: used, maximum load weight: 31,335 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 01/2026, loading space volume: 92 m³, Equipment: ABS, Sliding floor trailer with conical trough design, 92 m³ volume, 385/65 tires, ABS, ESP, 3x9 t SAF B9-22S Intradisc CD IO37 axles with 22.5 inch (430 x 45) disc brakes, ET 120 2040/1200; 9 t BPW SRBF Eco Air axle with 22.5 inch Eco Disc TS2 disc brakes ET 120; Wabco braking system with control box; lift axle on the first axle; automatic raising and lowering / starting aid controlled via EBS; Rectus 26KA air connection; 6x steel rims 22.5x11.75 inch ET120; Europoint 3 Hybrid lighting; 2x LED work lights mounted inside, in the upper corner of the front wall; floor: aluminum, 21-plank, 8 mm, smooth surface; hydraulic connection at front wall; radio remote control; ladder on the right of the front wall or on the front wall door; 12 pairs of lashing rings embedded in the side floor profiles in pairs; 2x round 80 mm bows (not swiveling) + 1x round 50 mm front + 1x round 50 mm rear; wear plates left/right at the rear section inside, aluminum 1250x2500x3mm; 2 rail cleaners made of plastic, attached to the carriage with a chain; plastic toolbox; roll tarp with tension belt; foldable A-board (rear side in body color white); side underrun protection with plastic plate; Rollfix. Iisdpfsxmpvljx Anwjc

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational Isdpfx Anszbxwiswoic • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Iijdpfjzbxvlox Anwjc Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, HBM Piezoelectric Force Measurement Ring 1-CFW/140kN New piezoelectric force measurement ring from HBM. The original packaging was only opened for the purpose of taking photographs. Manufacturer: HBM (Hottinger Baldwin Messtechnik) Type: 1-CFW/140kN Device type: Piezoelectric force measurement ring Measuring principle: Piezoelectric Iiodpfx Aszcg Dasnwec Rated force: 140 kN Available quantity: 1 piece

Condition: excellent (used), Very stable / heavy-duty roller stand - EUR 250.00 each, height adjustable from 0.68 m to 1.1 m 2 rollers, total width 260 mm Roller diameter 108 mm Iisdszc Ec Ijpfx Anwec

Condition: used, Manual torque multiplier, torque amplifier PLARAD Type XVR 100 The manual torque wrench for all applications in all industrial sectors. Torque: up to approx. 10,000 Nm Socket with splined drive Input square: 3/4" Gear ratio: approx. 32:1 - with right/left rotation - with anti-reverse mechanism - robust design - for tightening and loosening bolted connections - ratchet with 1" external square and 3/4" internal square - support arm Weight: 65 kg Total weight: approx. 70 kg Iodpfx Aozcf U Djnweic in good condition

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Iiedpshkz Hmefx Anwec Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: good (used), MEASURING ROD SET in wooden box, 3 pieces Iedpfx Anozazpljwsic - 3 pieces, length in wooden transport box DIN 875 - Quality 1 - 2 pieces, length 1600 mm - 1 piece, length 2700 mm - Total weight approx. 170 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2019, digital height gauge / electronic height measuring instrument Length:1200mm Width:800mm Iedpfjy Uvhyex Anwoic Height:1400mm Weight:500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Setting standards for micrometers Brand Mitutoyo 167-903 (28639) Standard settings for micrometers in a set from 25-275 mm 11 pieces Iisdpjwn E Ivjfx Anwec

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: NOH336-41, ABUS ELV overhead crane, crane runway, bridge crane, workshop crane Load capacity / lifting capacity: 5t - 5000kg Span: 12,990 mm, outer dimension approx. 13,250 mm Year of manufacture: 2005 with radio remote control Lifting height: 6 m Construction height (top of crane to hook): approx. 850 mm Iodpfx Aex Azrdjnweic Main girder length incl. buffers: approx. 260 cm Crane is dismantled and immediately available Very good condition, inspection logbook available Column-mounted and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please inquire with postcode Collection preferred

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Iiedpfjy S Rqwjx Anwec Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: used, Year of construction: 2002, Italpresse BG/660 Molding press / Heated platen press – 660 t pressing force Manufacturer: Italpresse Model: BG/660 Year of manufacture: 2002 Condition: Used, operational Technical data * Pressing force: 660 t * Press platen size: 1,900 x 1,600 mm * Heating power: 31 kW * Connected power: 108 kW * Operating voltage: 400 V * Control voltage: 220 V * Frequency: 50 Hz * Phases: 3 + N + PE * Rated current: 160 A * Weight: approx. 28,000 kg * Design: Bottom platen heated platen press / Molding press Robust hydraulic molding press from Italpresse for the production of molded parts and glued wood components. The machine has heated press platens and a pressing force of 660 tons. Ideal for applications in the furniture, wood, and molding industries. Isdpfx Anoy Ufqdjwjic The press is in used condition. Inspection possible by appointment. Documentation available.

Condition: new, Year of construction: 2026, functionality: fully functional, compressed air connection: 16 bar, total width: 500 mm, total length: 550 mm, total height: 1,000 mm, overall weight: 96 kg, input voltage: 230 V, warranty duration: 24 months, 💥 NozziTec X-Force M Dry Ice Cleaning Machines – New & Immediately Available! A - QUALITY 💥 Dry ice blaster / Cold Jet Quality Are you looking for top-quality industrial cleaning technology for your business? We offer brand new NozziTec X-Force dry ice cleaning machines. NozziTec is a leading manufacturer with more than a decade of experience in dry ice cleaning technology — machines engineered for maximum efficiency, reliability, and safety. 🛠️ Why choose NozziTec X-Force? ✅ Professional quality: Premium Polish craftsmanship featuring robust construction and high-end components; ideal for demanding industrial environments. Iodpfx Ansyf Aaijweic ✅ Durable & reliable: 24 months warranty and excellent support. ✅ Efficient & clean: Clean surfaces without water or chemicals — fast, sustainable, and environmentally friendly. ✅ Versatile application: Perfect for maintenance, production cleaning, renovations, or thorough degreasing in workshops, industry, and technical services. 📌 Optional: Full range of accessories, nozzles, blast hoses & service kits available. 💼 Ideal for, among others: 👉 Injection molds and dies 👉 Industrial machines & production lines 👉 Removal of paint, grease, oil, and fire residues 👉 Restoration and renovation of metal, stone, or wood 👉 Cleaning of electrical equipment (without moisture) 📞 Quotation, demo, or questions? Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, switch cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blaster Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: good (used), operating hours: 2,200 h, load capacity: 1,200 kg, lifting height: 1,800 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,200 km, The WIDE GAUGE stacker of this brand is from 2006 and is in good condition; Capacity 1,200 kg; Lifts up to a height of 1,800 mm; Clearance height is 2,100 mm; Only 2,200 hours on the counter; Equipped with stainless steel forks! Outside fork width 88cm, inside fork width 69cm; Gel battery is maintenance-free and comes with an external charger. Watch the video on YouTube. Iisdpfxow Nk Szs Anwec

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m in length, 2.5 m in width, approx. 2.6 m in height Machine weight: approx. 7 tons Iiedpfxjra Ddde Anwsc Cycle time: approx. 45–47 s Construction features large feed opening for cardboard possibility of automatic feeding (e.g., via conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales = fewer transports high pressing force suitable for continuous operation Available production years: 2018–2020

Condition: good (used), functionality: fully functional, Year of construction: 2017, Forced-circulation chamber ovens, electric, 12-month warranty, available for short-term delivery -Temperature 200°C, can be increased to 250°C! -Charging trolley, 5 units available, modification upon request -Fast heating times, short process times -Homogeneous temperature distribution of +/- 10°C -Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm -External dimensions (W x D x H): 4850 x 1705 x 3880 mm -Usable volume: 11.6 m³ -Control system: S!MPAC with touch panel -Program execution with feeler as a cascade control -Temperature limiter -Signal column -Directly accessible, with grid rails -Exhaust air volume flow: 140 m³/min Iiedpfx Ajy Tkfwonwjc -Electromagnetic door lock -Rated power: 180 kW -Connection: 241 kW!! -Weight: approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, forced-circulation oven, chamber oven, heating oven, chamber forced-circulation oven, annealing oven, tempering oven, forced-circulation chamber oven, hardening oven, Vötsch oven, Weisstechnik, fusing oven, curing oven, post-curing of liquid crystal windows, CFRP support structure, oven for glass, glass tempering oven, glass fusing oven, glass hardening oven.

Condition: used, functionality: fully functional, Main Technical Specifications Machine Model: COMDEC LV 50-40 PFT horizontal baling press Iisdsy Uddiopfx Anwec Pressing force: 50 tons Horizontal hydraulic baler for cardboard, paper and industrial waste Electrical data Power supply: 380 V / 3 phase / 90 A Hydraulic motors: 2 × 22 kW hydraulic pump motors Conveyor pump motor Hydraulic system Hydraulic main cylinder: 180 / 150 × 2000 mm Hydraulic pressure control system with oil cooling and filtration Oil tank with pressure and return filters Machine dimensions Total machine length: approx. 8,394 mm Width: approx. 1,920 mm Height: approx. 3,104 mm Functional equipment Automatic wire tying system Bale length control system Hydraulic wire twisting unit Automatic bale ejection system Conveyor control cabinet and electrical automation system Noise level Working noise level below 70 dBA

Condition: good (used), I sell a depth gauge of the well-known company Mahr EX 30 . Very good condition. Iiedpfxju Swkco Anwec