Used Four Pillars Cup Making Machine for sale (71,099)

Year of construction: 2022, condition: used, Model: TQC-650B Max. Forming Area: 650*300mm Max. Forming Depth: 125-180mm Sheet Thickness: 0.3-1.8mm Sheet Width: 660mm Max. Forming Speed: 30 times/min Nodjyvh S Hepfx Ahcowk Air Pressure: 0.6-0.8mpa Air Consumption: 2.0m³/min Water Consumption: 0.5m³/h Rated Power: 98Kw Used Power: 69Kw Power Supply: AC 380V,50Hz, Three-phase, Four-wire Dimension: L7000*W2000*H3100mm Weight: About 5T

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Nodpfx Aszf Nk Tshcswk Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Year of construction: 2009, Production: • Bag type: Bottom seal bags • Suitable products: o Garbage bags o Fruit and vegetable bags o Various types of plastic bags Materials: • Processable materials: o LDPE o HDPE o MDPE Technical Specifications: • Maximum sealing width (bag width): 1200 mm • Bag length (draw length): 150–3400 mm • Number of lanes: 1 • Maximum linear speed: 150 m/min • Maximum production speed: Up to 50 bags/min Control System: Nwedpfszk H E Sjx Ahcjk • PLC controlled • Operator interface terminal (HMI) • Print registration control • Servo-driven sealing bar Equipment: • Unwind unit • Photocell • Anti-static bars

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Nedpfx Aszc Uu Hehcowk

Condition: excellent (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm turning speeds 200 - 3200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20.000 euros Special price available upon request Features: - Robust column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch * 4 feed speeds: 0.1-0.2-0.3-0.4 mm/U * with electric cross-handle control Nedpfxezw N Eho Ahcswk - swivel work table * 1 station clamping table with 2 T-slots * 1 station with ALZMETALL vise - stepless speed adjustment - Digital speed display - Adjustable drilling depth stop - Pole-reversible drive motor - Clockwise rotation of the drill spindle - Main switch Emergency Stop button - User manual (PDF)

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: Nodpfxodkx Anj Ahcowk - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm - Drill spindle mount: MK 3 - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: - Coolant system - Quick-change drill chuck 1-13 - Lighting

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. Nodpfx Ahexqf Urjcswk What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. Nwsdpfx Aoxp Saxohcok The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. Nwsdpfx Ajzl S T Rohcok – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2022, We are offering this used KÖNIG ECO TWIN roll production line, manufactured in 2007. Model: ECO TWIN Type: 800-(DB800)-K6-SCHN6/B-(DA) Serial number: 07.0.0782 Nwedpsznm S Hofx Ahcok Year of manufacture: 2007 Power: 8 kW Frequency: 50 Hz Rated voltage: 3 × 400 + N V Rated current: 15 A The system has been fitted with new belts and is in perfect, fully functional condition. It was used by us solely as a backup system and was therefore only used very rarely. We acquired and overhauled the system approximately two years ago. The system is immediately available and can be collected directly after arrangement. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector Nwodpfx Ahszwf Ekscjk year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1.191, total length: 12,000 mm, total width: 2,500 mm, total height: 2,900 mm, input voltage: 400 V, overall weight: 2,000 kg, type of input current: AC, power: 4.5 kW (6.12 HP), Equipment: documentation/manual, Fully automatic frame bending machine for insulated glass spacers. Materials: Aluminum and stainless steel profiles, as well as plastic profiles (e.g., Swisspacer, Thermix, TGI, Rolltech) Profile widths: from 6 mm to 24 mm Interfaces (e.g., floppy disk drive, network/Ethernet, or serial interface) for connection to production optimization software (such as LiSEC, Albat+Wirsam/A+W). The "XL" (large-format) version: The XL variant features extended feed and collection belts. This allows for the processing of extremely long, one-piece spacer bars (often up to 6 meters) to bend very large insulated glass windows (jumbo or oversized formats) in a single piece without additional longitudinal connectors. Supporting roller mechanism: A characteristic feature of R&R. During the bending process, plastic deformation is supported by a roller, ensuring extremely tight, visually flawless corner radii without material compression. Counter-bending: Bending is performed using profile-specific tools. This prevents the buckling of the thin-walled hollow profiles. Nedpfx Ajzv Hymjhcowk 6-position profile magazine.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Nsdpozw Erwofx Ahcswk Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Maximum size: 2300x2500mm Minimum size: 250x250mm, but not suitable for Georgian bars.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, working height: 640 mm, input voltage: 400 V, overall weight: 3,200 kg, type of input current: three-phase, Equipment: documentation/manual, Maximum unit length: 4000 mm x 2500 mm (height) Minimum unit dimensions: L320 x 180 mm Minimum unit thickness: 12 mm (3+6+3) Maximum unit thickness: 65 mm; unit pane between 3-25 mm, and spacer between 6 and 24 mm. Maximum unit weight: 200 kg/m Optional: custom shapes and triple units. Nsdpszduhusfx Ahcewk

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness Nwsdpfx Aorrvkbshcsk VL-1/25-2, sealing robot for double glazing units DOS-1TH, 2k metering station for Thiokol The machine will be completed and tested in simulation mode prior delivery

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4633, total width: 1,800 mm, total length: 10,000 mm, total height: 2,140 mm, Working machine in exellent condition from German production Nwodpfxszhk Avs Ahcek System consists of 1 x Honsel type: F13, serial number: 4633 1 x Fischer & Kreck, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories

Condition: good (used), Year of construction: 1995, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK table: 420 x 350 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm Current list price ~ 12.500 euros Special price available upon request Features: - Sturdy column drill press (V-belt) - stepless speed adjustment - pole-changing drive motor - height-adjustable worktable Njdpfxozl E Uuo Ahcjwk * with 2 T-slots - R/L rotation of the drill spindle (reversing switch) - Main switch with motor protection switch - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Operating instructions (PDF)

Condition: used, Year of construction: 2018, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, We are offering this used KÖNIG CertoPan M roll production line, manufactured in 2018. Model: CertoPan M Year of manufacture: 2018 Machine no.: 32.1.0103 Power: 3 kW Rated voltage: 3x400+N V Rated current: 6 A Frequency: 50 Hz The system is currently still in daily use and is in fully functional condition. All service and maintenance work, as well as any necessary repairs, have been and will continue to be carried out regularly. An inspection of the running system is possible at any time by arrangement. Nedpfx Aheznm Unecjwk The system is expected to be available from spring 2027. If you are interested or have any questions, we look forward to hearing from you. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2018, overall weight: 750 kg, Brand: HDT Type: HD Pro6 Easy SI Year: 2003 / 2018 Power: 16 A Weight: 750 kg The HD Pro-6 Easy is the highlight of HDT's hydraulic manual sealing systems. The innovative hexagonal base frame guarantees increased stability, and the pivoting control panel is just one of the most noticeable features of the new high-tech version. The pivoting arm with pneumatic support enables effective integration into your individual workflow and optimal adaptation to local conditions. Pivoting control cabinet – always in the operator's field of vision Hydraulic unit with 4 kW and steplessly adjustable output New maintenance-free pump generation Increased dosing accuracy Mobile base frame, adapted for loading with pallet trucks: height approx. 20 cm Variable mixing ratio adjustable from 100:15 to 100:5 Roll-off track for easy drum change One-hand dosing control Pot life control Drum empty indicator (basic) Heated subsequent plate as a basic component (PU/PS) Automatic shutdown of all pumps in case of overpressure Nedpjzraafefx Ahcjwk Automatic shutdown of all pumps in case of material shortage Automatic rinsing with a defined number of cycles Two-hand safety control (occupational safety during container change) Pivoting arm in standard design with pneumatic support, 2.5 meters in length / length of manual hoses 2.5 meters

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60: 35 mm - Drilling capacity in steel ST 60: 40 mm - Drill spindle connection: MK 4 - Drill spindle stroke: 170 mm - Overhang: 345 mm - Rotary table with 2 T-slots: 550 mm - Max. distance table – drill spindle: 650 mm - Max. distance base plate – drill spindle: 1000 mm - Feeds: 0.09 - 0.16 - 0.28 mm/rev - Variable speed AZ gearbox with gear shift Nwodskt Nqqjpfx Ahcsk - Continuously adjustable drill spindle speeds: 40 - 720 rpm - Right/left rotation - Drive: 400 V / 2.5 kW - Lighting - Coolant system - Space requirement: approx. W 750 x H 1950 x D 1000 mm - Weight: approx. 700 kg

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding Nwedpen D E A Tjfx Ahcsk • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 2,200 kg, type of input current: AC, Equipment: documentation/manual, We are offering this used LISEC LBH-25AR insulating glass manufacturing machine, manufactured in 2014, for sale. Serial/drawing number: 572-074946 Weight: 2,200 kg Rated current (full load): 10.0 A Apparent power: 7.00 kVA Voltage: 400 V Frequency: 50 Hz Njdpezmn Iysfx Ahcswk Short-circuit strength: 10 kA Pressure: 6.00 bar Degree of protection: IP32 Maximum current: 1.4 A AC/DC voltage: 400 / 24 V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Nwedpfx Ahetxni Nscsk Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Fully Automatic Paper Bag Making Machine for Sale – WFD-550 Fully automatic paper bag making machine, model WFD-550, manufactured in 2020, available for sale. The machine is in good working condition and was used in production for only 2 years. It has been regularly maintained and operates reliably. Main features: - Production of paper bags with twisted handles - Production of paper bags with flat handles - Fully automatic feeding and forming process - Stable and efficient operation The machine is suitable for industrial production and can be used for manufacturing shopping bags, packaging bags, and other paper products. Condition: good technical condition, ready for operation. Nwedpfx Ajyuf T Rehcjk Price: negotiable For serious inquiries, please contact by email.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm - Maximum drilling capacity in steel ST 60: 65 mm - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 Nedjyk Dp Nopfx Ahcswk - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg