Used Fully-Automatic Centrifugal Disc Finishing System for sale (53,283)

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Rjdpfx Adoy E S Evs Ajt

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder Rjdpsrit H Rjfx Ad Aet The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Rjdpfx Adjw Hrrre Aot Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Year of construction: 2018, condition: ready for operation (used), Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible. Rodpfx Adow S Tyms Ajt

Condition: used, Year of construction: 1998, machine/vehicle number: 1941, Vollautomatische Hochleisungsstanze - Fully Automatic Punching System Kugler 340-2RBaujahr / Year 1998 - Serial-No. 1941-340-2R Arbeitsbreite / Working width max. 340mm Format / Sizes min. 120 x 105mm Format / Sizes max. 340 x 340mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute 80-100 Cycles Redpfxoiypk Sj Ad Ajt Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2009, Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R)Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Rjdpfx Asiypk Iod Ajt Nennstrom / Power 10 A2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Rodewdibxjpfx Ad Aet Manufacturer: Stork Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Redswz Ev Tspfx Ad Aot Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22.5, wheelbase: 9,350 mm, color: white, Year of construction: 2011, Axle configuration Tyre size: 385/55R22.5 Make axles: SAF Rear axle 1: Alloy wheels; Max. axle load: 9000 kg Rear axle 2: Alloy wheels; Max. axle load: 9000 kg Rear axle 3: Alloy wheels; Max. axle load: 9000 kg Weights Empty weight: 9.650 kg Carrying capacity: 29.350 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OL-78-GG Additional information Please contact Arie or Pedro for more information Rsdjyyztrepfx Ad Aet = Additional options and accessories = - Air suspension - Disc brakes - EBS - Hardwood floor - Lift axle

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 6.690 kg Axle 1: left 4 mm right 10 mm Redoyxrf Ajpfx Ad Aot Axle 2: left 5 mm right 10mm Axle 3: left 10 mm right 12 mm

Condition: used, axle configuration: 3 axles, first registration: 08/2018, color: other, Year of construction: 2018, Empty weight: 6.939 kg Rodpfxev Ica De Ad Aot The 2018 System Trailer 3 Axle SAF Disc Curtainsider features a galvanized chassis and anti-theft tilt, priced at €11,950 without VAT. It showcases good tire conditions across all axles, enhancing its appeal for heavy-duty transportation needs. The trailer is designed for optimal security and durability, making it a reliable choice for logistics operations. Tire profile dept: Axle 1: left 13 mm right 5 mm Axle 2: left 7 mm right 6 mm Axle 3: left 7 mm right 6 mm

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Redpfjymn R Nex Ad Ast Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Automatic Wagner powder coating plant, year of manufacture 2012 Rsdpsy Icfxjfx Ad Aot - Wagner SuperCube booth - Wagner SuperCenter powder supply system - PBS filter and cyclone 18,000 m³/h - STS CO2 extinguishing system - Pre- and post-coating stations with scissor lift platforms - Clearance dimensions (H): 2500 mm, (W): 1000 mm - 12 automatic guns + manual powder coating units Disassembly by arrangement at our facility in Bad Laer! Price upon request

Condition: good (used), overall weight: 160 kg, The BookMaster brochure machine and the TrimMaster trimmer combine maximum performance with cost efficiency. They are easy to operate, low-maintenance, and therefore by far the most advanced, user-friendly, and reliable saddle stitch booklet makers on the market. The BookMaster features a unique stapling mechanism that ensures virtually maintenance-free operation. The main wear parts are integrated into the staple cartridge and are replaced every 5,000 cycles during cartridge change. This enables over one million cycles before any stapler head service is required. The BookMaster is equipped with manual adjustments for page margins, end alignment, and staple/fold positioning. The TrimMaster trimming unit is fitted with a single, self-sharpening blade made of hardened steel for clean trimming of the book fore-edge. All trimming waste is conveyed outside the machine to an external waste container, allowing for continuous operation. Finished brochures are transferred onto a high-performance delivery conveyor. Redpfxsy Idr Ho Ad Aet Additional information: - Max sheet size: 482 x 320 mm - Min sheet size: 210 x 140 mm - Max brochure thickness: 22 sheets - Max trimming length: 25 mm - 230 volts Shipping available, collection possible, trial run available. Operating manual included.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) – Maximum product height: 360 mm – Product lengths over 2 m possible – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm Rodpfx Asyant Red Ajt – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,893 mm, total height: 1,585 mm, total width: 1,240 mm, warranty duration: 12 months, type of input current: AC, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, Pratika 56 MPE X2 The Minipack Pratika MPE X2 is a proven, fully automatic machine for manufacturing shrink film packaging. This machine is highly versatile and user-friendly, making it suitable for a wide range of products in both food and non-food sectors. • Fully automatic L-sealer with brushless motors and modern PLC control with a 7” color display • Simple operation • Storage of up to 128 recipes including product images • Quick product changeovers • Up to 3,600 units per hour • Convenient and fast product changeovers • Max. product dimensions: 600 x 400 x 240 mm • Machine dimensions: 2,480 x 1,240 x 1,675 mm • No compressed air required! • Doors on both sides of the machine Rsdpfxsx Tp H Ts Ad Ajt • Machine interior equipped with lighting

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing oven Conveying technology (cycle process) Rodsum Uflepfx Ad Ast Electrical control system

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Fully automatic milling machine Busch Rjdpsy E I R Uofx Ad Aot Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive: 5.5 kW Accessories: support tables Tool holders, cutters Coolant system Digital display Weight: 4 t Price: EUR 3,000 – plus VAT ex location

Condition: used, Year of construction: 2013, functionality: limited functionality, cutting height (max.): 230 mm, cutting width (max.): 245 mm, total height: 1,680 mm, total width: 1,950 mm, overall weight: 1,000 kg, empty load weight: 1,000 kg, feed length Y-axis: 500 mm, saw band length: 2,950 mm, saw band width: 27 mm, section length (max.): 9,999 mm, space requirement height: 2,100 mm, space requirement length: 2,900 mm, space requirement width: 1,950 mm, table length: 2,800 mm, table width: 245 mm, working height: 890 mm, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. If you have any further questions, please feel free to contact us by phone or email. Redpfx Adox Dirze Aet Best regards, Weber Geländersysteme

Condition: new, High-quality ZS38 PE centrifuge (new machine) from Eurotec Innovation – the ideal solution for cost-efficient solid-liquid separation in industrial processes. The system enables continuous recirculation processing, reducing operating costs and conserving resources sustainably. Machine type: Process water centrifuge (solid-liquid) Manufacturer: Eurotec Innovation GmbH Model: ZS38 PE Application: Vibratory finishing, general solid-liquid separation, coolant (metalworking fluid) treatment, wet blasting systems, treatment of industrial liquids ⚙️ Technical data: Speed: approx. 2,900 rpm Centrifugal force: up to 1,800 g Throughput: up to 1,400 l/h Drum diameter: 380 mm Power: 4 kW Tank volume: approx. 200 liters Temperature resistance: up to 70°C Advantages: ✔ High separation efficiency due to strong centrifugal force ✔ Significant reduction in disposal costs ✔ Reduced use of chemicals (compounds) ✔ Closed water circulation system ✔ Suitable for continuous operation ✔ Can supply multiple machines ✔ Environmentally friendly solution 🏭 Fields of application: Vibratory finishing / tumbling Metal processing Coolants and lubricants Washing & coating processes 🔧 Equipment: Dirty water tank with agitator Double diaphragm pump PLC control system Modular expandable Further variants and custom designs available on request. From development to production, we supply all products from a single source – all “Made in Germany”. Redohrh Ntjpfx Ad Ast ----- We are happy to provide individual consultation and prepare a suitable offer. Simply send a non-binding inquiry! ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal), where we will first provide you with a non-binding offer, including our general terms and conditions and information on the right of withdrawal with imprint details, before any purchase/contract conclusion is made.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, operating hours: 5,800 h, MEBA Mebamat 434 Automatic metal band saw Manufacturer: Meba Type: Mebamat 434 year of construction 2013 Condition: good, used Switch-on hours: 14.800h Sawing hours: 5682h NC-automatic version Motor 7.5 kW Saw band 6220 x 41 x 1.3 mm Belt speed 15 - 150 m/min. Rodpoy Egfdofx Ad Ajt Max. Material passage Ø 430 / 430 x 430 Smallest Ø 5 mm Dimensions (L x W x H) 1700 x 3100 x 2350 mm Working height 750 mm Weight 4100 kg Zero stop Scraper chip conveyor Minimum quantity lubrication Automatic material height and width detection Roller conveyor 300cm 8x new replacement saw bands

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Rjdpfx Adsy Ef Azj Aet Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Condition: excellent (used), mileage: 83,112 km, power: 279 kW (379.33 HP), first registration: 08/2000, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, total length: 8,920 mm, total width: 2,500 mm, Year of construction: 2000, XLWFM1457Y0092105 = More information = Technical information Number of cylinders: 6 Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Rsdpfxjymrufo Ad Ajt Empty weight: 16.880 kg Carrying capacity: 12.120 kg GVW: 29.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: BJ-LS-30 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 1994, Automatic defect cross-cut system Wood width max. 260 mm Wood height max. 100 mm Saw 7.5 kW Rodpfxskv Unto Ad Ast Feed 6 kW worked 1995 - 2012 approx. 4 hours/day

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Rsdpon I Rqcefx Ad Ast