Used Giusti 225L for sale (18)

Condition: used, Giusti cooking vessel steam jacketed cooking vessel, 225L, central bottom discharge, stainless lid, Laodpfx Aodrmnbemmoc

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Lsdjrtr D Iepfx Ammoac Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: Ljdpoym Tuaofx Ammjac grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons

Condition: ready for operation (used), Year of construction: 2015, GIUSTINA R 114 CNC Fanuc Centerless Grinding Machine CNC Control: FANUC Series 18i - MB Laodpfx Amjzdnx Tjmoc Grinding capacity: Ø 1.5 to 500 mm Operating grinding wheel: Ø 610 x 508 mm Conductive grinding wheel: Ø 355 x 508 mm Weight: approximately 15 tons

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Ljdpeu Ng Dtofx Ammeac Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: used, Year of construction: 1995, Technical details: grinding height: -- mm grinding width: 220 mm grinding wheel diameter: 762 mm total power requirement: 90 kW weight of the machine ca.: 13 t grinding spindle 1 drive:: 37 kW grinding spindle 2 drive:: 37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors Laedpfxowi Nh Ns Ammsc *

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Lajdsxrnuwopfx Ammec

Condition: used, grinding diameter 800 mm grinding length 4000 mm Control SIEMENS Simatic OP3 grinding wheel diameter 800 mm spindle speeds 0 - 70 mm voltage 400 V 2 x Heavy Duty Steadies Coolant System The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Lodpfxsyqtwis Ammoac Your Markus Hirsch Team

Condition: used, power: 110 kW (149.56 HP), Year of construction: 2009, operating hours: 11,300 h, Empty weight: 21.500 kg Lsdpfx Amjzdtaiomoac Please contact Emal Jaweed for more information

Condition: used, mileage: 216,730 km, power: 162 kW (220.26 HP), first registration: 10/2003, fuel type: diesel, empty load weight: 7,300 kg, maximum load weight: 7,200 kg, overall weight: 14,500 kg, axle configuration: 4x4, wheelbase: 3,200 mm, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, loading space length: 3,000 mm, loading space width: 2,380 mm, loading space height: 500 mm, front tire size: 315/60R22.5, rear tire size: 275/70R22.5, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel superstructure, Doka, 1x air seat, rear window, heated mirrors, electric window left, electric window right, air conditioning, cruise control, switch 8, ABS (anti-lock braking system), power take-off, raised exhaust, differential lock, driving lights, rotating beacon, leaf suspension, air+light trailer hitch, aluminum tank, low-noise G1, winter service equipment, lashing eyes, U-protection, swing flaps, yellow environmental badge Wheelbase: 3200 mm Body: Atlas 3-sided tipper body, front mounting plate, air conditioning. 6 cylinder engine ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lajdpovhiixefx Ammec - .

Condition: excellent (used), Spako Cooking Vessel Capacity 225 litres Thermal Oil Jacketed up to 150 degrees centigrade Laodpfxey Tnmrs Ammoc Scrape mix arm Tap discharge New Process controller fitted Two new elements fitted New insulation fitted

Condition: used, Year of construction: 2011, machine/vehicle number: DWBHEDSOEB0050903, Operating weight: 21,500 kg, Power: 110 kW, Operating hours: approx. 3,500 h, equipped with quick coupler. NOTE: The concrete pulverizer shown in the pictures is not included with this item. Ledpfx Amey Rvmzjmsac

Condition: used, Year of construction: 2008, machine/vehicle number: 66271, - Device designation: XT H 225 L - Manufacturer: Metris X-Tek Systems Ltd. - Serial no.: JN1373 - Year of manufacture: 2008 - Dimensions of X-ray unit enclosure: - Length: 2422 mm - Depth: 1275 mm - Height: 1990 mm - Weight: 3500 kg - Dimensions of control console: - Width: 550 mm - Depth: 746 mm - Height: 1076 mm Laodpfoym N Txsx Ammec - Weight: 500 kg - Last maintenance/repair: February 2023 (job report attached) - Last used and powered on: Mid 2024 - The unit was shut down as the next maintenance was due, but it was decided not to incur these costs. Up to that point, the machine was running perfectly. - The scope of delivery includes various accessories, such as several filters for scanning mainly plastic materials, clamping and alignment aids, operator’s manual in paper form, etc.

Condition: good (used), 225 linear metres DUWIC pallet racking Used equipment, see photos. Manufacturer: DUWIC Height approx. 5.4 m Depth: 110 cm Beam length: 2.7 m / 1.85 m Load capacity per level: 3000 kg / 2000 kg Bay load: 12,000 kg Frames galvanised Beams orange Asking price: €20,900 net ex stock Offer includes: + 85 pre-assembled frames, depth 110 cm, height 5.4 m + 340 beams, length 2.70 m, 3000 kg load per level + 150 beams, length 1.85 m, 2000 kg load per level + 980 locking safety pins + 170 concrete anchors + Load capacity plates Lodpforiuyqsx Ammsac Goods in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available upon request. Over 5000 linear metres of pallet racking from various manufacturers always in stock. (Specifications, details and prices subject to change and prior sale! See our T&Cs, all prices excl. VAT ex stock.)

Condition: ready for operation (used), functionality: fully functional, mileage: 68,235 km, power: 165.49 kW (225.00 HP), first registration: 07/2003, fuel type: diesel, empty load weight: 8,500 kg, overall weight: 16,500 kg, tire size: 14.00R20, axle configuration: 4x4, color: green, gearing type: automatic, suspension: steel, Year of construction: 2003, operation weight: 8,500 kg, Equipment: air conditioning, all wheel drive, compressor, differential lock, trailer coupling, TUV is made NEW truck registration , The MAN in a good used condition directly from the authority (army) Super maintained and checkbook maintained, see photo, the body is in good used condition , The 18.225 is equipped with: Automatic transmission, all-wheel drive, differential lock rear and front, 2 front seats, tire size 14.00R20, transmission fully automatic ZF, has a curb weight of 8500 kg, total weight is 16500 kg, displacement 6871cm? , , 24Volt power supply , The Steyr not only has TÜV when handed over, but also drives reliably :-) - The MAN is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why do you want to settle for less? - Give me a call Greetings, Philipp Laodpfjvgbizsx Ammoc

Condition: ready for operation (used), Year of construction: 2021, A total of six Franz Wölfer three-phase asynchronous motors for converter operation are available. 1) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: right, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 2) Franz Wölfer ODRK 225L-4bT, year of manufacture: 2021, moment of inertia: 0.57kgm², rated power: 190kW, power factor: 0.94, rated speed: 3500rpm, duty type 40%: S3, weight: approx. 510kg. Including encoder POG 10. 3) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: left, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 4) Franz Wölfer DRK 250M-4T, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. 5) Franz Wölfer DRK 250M-4T, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. 6) Franz Wölfer DRK 250M-4, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. Documentation available. An on-site inspection is possible. Individual sale possible. Ljdpfx Aezcp T Dommjac

Year of construction: 1962, condition: ready for operation (used), A horizontal ploughshare mixer Gebrüder Lödige is available. Total volume: 300l, usable volume: 225l, mixing chamber diameter: 640mm, mixing chamber length: 1000mm, inlet opening diameter: 250mm, ground clearance: 800mm, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 500kg. An on-site inspection is possible. Expected to be available June 2026. Ljdpfsyxramsx Ammjac

Condition: new, Year of construction: 2025, TANK SHEAR FOR 25-40tons Excavator Cutting Force - Blade Throat: 4300kN Lajdpfx Amswmw N Aomec Cutting Force - Blade Center: 1900kN Cutting Force - Blade Tip: 1550kN Jaw Circuit - Max. Oil Pressure: 350bar Jaw Circuit - Max. Oil Flow: 225l/min Rotation Circuit - Max. Oil Pressure: 160bar Rotation Circuit - Max. Oil Flow: 40l/min Weight: 2800kg (including bracket, housing,jaw)