Used Glatt Wsg-C200 for sale (201)

Condition: used, Year of construction: 1989, Batch fluidised bed dryer in stainless steel with spray granulation. Manufacturer : Glatt Model: WSG-C200 Year: 1989 Previous use: pharmaceutical Product pan capacity: 700 litres. Product capacity: 200 – 280 Kg Air filtration and heating battery. Bag filtration Heat exchange: tubular Temperature control: multiple sensors Spraying: yes Watson Marlow peristaltic pump Spray nozzle Frame and tower: 316 stainless steel Electrical cabinet Sold with 2 pans and protective pockets Trolley reverser: available Bwjdpfx Abex R An Seler Documentation: available in German Spare parts Valves available Fan not available. Hot water generator / boiler not available

Condition: good (used), Year of construction: 1994, space requirement width: 500,750 mm, Coating pan GLATT Type Coater GC 750/500 from 1994 with interchangeable drum, explosion-proof design. Bedpfxezmvqis Ablswr Process Equipment: Glatt Coater GC 750 (equipment only used for test runs) Perforated drum with D = 500mm drum and 750 mm drum, with: Inlet and outlet air ducts for both drums Capacity of 750 drum: 50 – 75 kg/batch Capacity of 500mm drum: 15-45 kg/batch Discharging must be done manually Spraying arm with nozzle adapter Spraying system with 1 Schlick nozzle Control cabinet (pneumatic/electrical) with Siemens PLC S5 Air handling unit 7AIR including: With inlet air fan F7 and H12 filtration Preheating Dehumidification Heating Deduster HERDING Outlet air fan WIP nozzle inside drum and external nozzle

Condition: good (used), Year of construction: 1998, gas heater WSG 100PA 9800m3 / h hall heating made by WSG 100PA Maximum air flow: 9800 m3 / h heating power 110 kW Gas connection: 3/4 " gas: g20 natural gas axial fan 2pcs electric power: 230v 50Hz 0.62kw Bwjdpfx Abehrnv Nsljr can be suspended mechanically adjustable slats honeywell gas regulator enclosure Size H: 150 cm SZ: 100 cm M: 155 cm

Condition: used, - Material: Stainless steel - Pneumatic version / ADF - EX Bodpfxjx Rz Nbs Ablswr - 2 truncated 400L tanks on trolley (per dryer) model WSG120 / D.1200 / 900 X PF.500 - 1 tank turner common to both dryers - Control cabinet - Safety by 2 explosion membranes coupled to nitrogen gas cylinder

Condition: used, A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf 1 Glatt GC 750/500 coating unit Bwedpox R Amnofx Ablsr – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar – Temperature : 159°C – Water volume: 10 L 1 Cleaning system (CIP) Used for easy cleaning and maintenance of the machine.

Condition: ready for operation (used), Year of construction: 2011, A used CNC turning machine, Index C200, with a wide range of accessories. Technical specifications will be added. Bsdpfjzhdk Hox Ablswr

Condition: excellent (used), Year of construction: 2016, operating hours: 5,397 h, functionality: fully functional, first registration: 12/2016, overall weight: 4,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,200 kg, empty load weight: 2,800 kg, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, emission class: euro6, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, electronic stability program (ESP), fog lights, hydraulics, An authorized SUBARU dealership in Łaziska Górne offers a compact JOHNSTON, now BUCHER JOHNSTON model C200 sweeper, sourced from Sweden from a company specializing in cleaning roads and large facilities. The machine is well-suited for work on sidewalks or in densely populated residential areas due to its small, compact dimensions. This sweeper comes from its first owner, who had over 20 units in their fleet, and all were serviced according to the manufacturer's recommendations. The machine is designed for maintaining the cleanliness of roads, sidewalks, parking lots, squares, urban areas, industrial plants, logistics centers, and municipal areas. The Johnston C201 is a highly regarded and proven suction sweeper, characterized by its compact dimensions, high maneuverability, and high work efficiency in urban environments. Cabin equipment: Radio Air conditioning Rearview camera Brand: Johnston Sweepers Model: C201 / C200 Year of manufacture: 2016 Serial number: 2000 / 207006 / 03 / 16 Bsdoy U Nidspfx Ablewr GVWR: 4000 kg Permissible total weight: 4750 kg Permissible front axle load: 1970 kg Permissible rear axle load: 2030 kg Certificate: PM10 Certified CE marking: Yes Noise level LWA: 103 dB Machine type: compact suction road sweeper Waste container capacity: 1.8 m³ Usable container capacity: approximately 1.5 m³ Fuel tank: 52 l Clean water tank: approximately 152–175 l, depending on the version Water recirculation system: approximately 250 l Total water system capacity: approximately 402–425 l Drive: hydrostatic Sweeping working speed: 0–16 km/h Travel speed: up to 40/50 km/h, depending on the CN/CX version Theoretical sweeping performance: up to 36,800 m²/h Climbing ability: up to 30% Suction nozzle width: approximately 815 mm Brush diameter: approximately 850 mm Container discharge height: approximately 1545 mm DIMENSIONS: Overall length: approximately 4270 mm Overall width: approximately 1315 mm Overall height: approximately 1985 mm MACHINE DESCRIPTION: The Johnston C201 / C200 is a compact suction road sweeper that performs excellently in urban and municipal work. Thanks to its small dimensions, the machine is very maneuverable and can operate in places where larger sweepers have limited maneuvering capabilities. The machine is ideally suited for cleaning streets, sidewalks, bus bays, parking lots, maneuvering areas, industrial areas, residential areas, city centers, and private properties. The suction system, together with the side brushes, effectively collects sand, dust, leaves, small debris, and road dirt. A major advantage of this machine is its 4000 kg GVWR, which means a higher permissible total weight than in the 3.5-ton versions. The machine has a PM10 certificate, CE marking, and a Johnston Sweepers factory nameplate. APPLICATION: Maintaining the cleanliness of roads and streets Cleaning sidewalks and paths Municipal work Cleaning parking lots and squares Maintaining industrial areas Serving municipalities, cities, and municipal companies Work at logistics centers and production facilities Cleaning private and residential areas The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. Please contact us directly by phone to get your best price.

Condition: ready for operation (used), Year of construction: 2016, laser power: 200 W, Laser engraving machine manufactured in 2016. This Trotec SP500 C200 features a powerful 200W CO2 laser source and a generous working area of 1240 × 710 mm. With only 1,550 working hours, it remains in excellent condition and has been used solely for paper and cardboard cutting. If you are looking to get high-quality laser cutting and engraving capabilities, consider the Trotec SP500 C200 machine we have for sale. Contact us for further details. • Laser source: 200 W CO2 • Working area: 1240 × 710 mm • Working hours: 1,550 h • Condition: Excellent/mint • Ownership/usage: Single owner; used only for paper and cardboard • Integrated equipment/options: Bwsdjzarzrjpfx Ablor • JobControl Vision camera system • Autofocus system (high-precision electro-optical) • Laser pointer • Electronically controlled Z-axis • Air-assist with integrated compressor • Dust Protection Pack Technology • JobControl Expert software • Pass-through system • Tables: Honeycomb table; Slat cutting table; White acrylic + aluminum table • Optics: 2.0" precision lens + additional optics package (2.0", 2.5", 5.0") • Gas kit • Commercial info: • Machine under power; available for inspection and cutting tests • Location: Modena, Italy • Note: 24 months warranty originally included Additional equipment • Industrial water chiller • Professional mobile fume extraction system • H13 washable filter cartridges • Additional spare filter cartridge • Pneumatic pulse-cleaning system • 1.5 HP extraction fan motor • Double activated carbon filtration cell • Full package sale includes: Laser machine + chiller + professional fume extractor

Condition: excellent (used), Year of construction: 2009, operating hours: 29,000 h, functionality: fully functional, Equipment: documentation/manual, The INDEX C200 – manufactured in 2009 – is a powerful CNC production turning center with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a high-quality 3-turret design, with turrets 1 and 2 each equipped with X, Z, and Y axes, and turret 3 used for machining on the counter spindle. All three disc turrets are equipped with 10 stations and, with driven tools up to 6,000 rpm, enable highly flexible complete machining. With a portal parts handler, conveyor belt, C-axes on the main and counter spindles, and powerful spindle drives, the machine is particularly suitable for productive series production of complex turned/milled parts. Control: FANUC 31i Design: Machine with 3 tool holders / 3 disc turrets Bar capacity: 65 mm Machine bed: Vertically arranged gray cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose: ISO 702/1, Size 140 Cyl. Chuck diameter: 160 mm Power: 25 kW at 100% ED / 33 kW at 40% ED Torque: 112 Nm at 100% ED / 150 Nm at 40% ED Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Z-axis: 700 mm travel Rapid traverse Z-axis: 50 m/min Tool holder / Turret Design with 3 disc turrets, each with 10 stations. Tool system with 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Bwedpfx Aboy Tmhzslor Tool holder 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (according to documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool holder 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment according to documentation Portal parts handling system with numerically controlled Z-axis Workpiece removal from main or counter spindle to conveyor belt Removal of scrap material from the main spindle into a scrap container Portal parts handler: Traverse speed: 100 m/min Traverse range: 70 mm Workpiece diameter max.: 90 mm Workpiece length max.: 250 mm Scrap length max.: 250 mm Workpiece weight max.: 3.5 kg Hydraulic system: Flow rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Coolant circuit: Flow rate: 19 l/min Coolant unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Condition: new, mileage: 10 km, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 8x2, fuel: diesel, fuel tank capacity: 325 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2024, Equipment: AdBlue, = Additional Options and Accessories = - PTO (Power Take-Off) = Further Information = General Information Year of manufacture: 2024 Applicable material: Concrete Technical Information Bedpfx Abouu A T Hsljwr Number of cylinders: 6 Engine displacement: 10,800 cc Transmission Gearbox: TraXon, 12 speeds, automatic Axle Configuration Front axle 1: Tire size: 385/65 R22.5; Max. axle load: 10,000 kg; Steered; Suspension: leaf spring Front axle 2: Tire size: 385/65 R22.5; Max. axle load: 10,000 kg; Steered; Suspension: leaf spring Rear axle 1: Tire size: 315/80 R22.5; Twin tires; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Tire size: 315/80 R22.5; Twin tires; Lift axle; Max. axle load: 10,000 kg; Suspension: air suspension Weights Curb weight: 14,500 kg Payload: 27,000 kg Gross vehicle weight: 41,500 kg Functional High-pressure pump: Yes Water installation: Yes Hoses: Yes Further Information Please contact Sjaak van der Wel for more information.

Condition: new, mileage: 10 km, power: 330 kW (448.67 HP), first registration: 03/2025, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 8x2, wheelbase: 6,810 mm, fuel: diesel, fuel tank capacity: 325 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, total length: 10,110 mm, total width: 2,550 mm, total height: 3,900 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2025, Equipment: AdBlue, General Information Usable Material: Concrete Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Gearbox: TraXon, 12-speed, automatic Axle Configuration Front axle 1: Tire dimension: 385/65 R22.5; Max. axle load: 10,000 kg; Suspension: leaf suspension Front axle 2: Tire dimension: 385/65 R22.5; Max. axle load: 10,000 kg; Suspension: leaf suspension Rear axle 1: Tire dimension: 315/80 R22.5; Dual tires; Max. axle load: 11,500 kg; Reduction: single reduction Bsdpsv Ifdfofx Abljwr Rear axle 2: Tire dimension: 315/80 R22.5; Lift axle; Max. axle load: 10,000 kg Weights Unladen weight: 14,876 kg Payload: 26,624 kg Gross vehicle weight (GVW): 41,500 kg Functional Equipment High-pressure pump: Yes Water installation: Yes Water tank: 400 l Hoses: Yes Additional Information Please contact Sjaak van der Wel for further information.

Condition: new, mileage: 450 km, power: 390 kW (530.25 HP), fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x2, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2024, Equipment: AdBlue, General Information Year of manufacture: 2024 Applicable Material: Concrete Technical Information Number of cylinders: 6 Engine displacement: 10,700 cc Bwodpfx Abevxi Shsler Axle Configuration Front axle 1: Tire size: 385/65R22.5; Max. axle load: 10,000 kg; Steered; Left tire tread: 100%; Suspension: leaf spring Front axle 2: Tire size: 385/65R22.5; Max. axle load: 10,000 kg; Steered; Left tire tread: 100%; Suspension: leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tyres; Max. axle load: 11,500 kg; Inner left tire tread: 100%; Outer left tire tread: 100%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Max. axle load: 10,000 kg; Steered; Left tire tread: 100%; Suspension: air suspension Weights Unladen weight: 14,700 kg Payload: 26,800 kg Gross weight: 41,500 kg Functional Water tank: 400 l Further Information Please contact Sjaak van der Wel for further information.

Condition: excellent (used), mileage: 55,000 km, power: 272 kW (369.82 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 6x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 325 l, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 8,800 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 10,000 kg, Year of construction: 2023, Equipment: AdBlue, = Additional Options and Accessories = - PTO Bwedpfsvyg Nmex Ablsr = Additional Information = General Information Applicable material: Concrete Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Transmission: TraXon, 12-speed, automatic Axle Configuration Front axle: Tire size: 385/65 R22.5; Max. axle load: 10,000 kg; Suspension: leaf suspension Rear axle 1: Tire size: 315/80 R22.5; Max. axle load: 11,500 kg; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tire size: 385/65 R22.5; Lift axle; Max. axle load: 10,000 kg; Suspension: air suspension Weights Unladen weight: 14,500 kg Payload: 17,000 kg GVW: 31,500 kg Functional Features High-pressure pump: Yes Water installation: Yes Condition Technical condition: very good Optical condition: very good Further Information Please contact Sjaak van der Wel for more information.

Condition: used, Year of construction: 2011, turning diameter 160 mm turning length 550 mm control Siemens weight of the machine ca. 9000 kg Bwedpfx Asyuzfpjbljr

Condition: used, power capacity 30 kW volt 380 V ampere 58 A Bodpfx Abod Ihafslowr new motor with options G45 und K42 Data please see typeplate.

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Bodpfjud R T Ssx Ablowr

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Bwsdpfxoy Au I Uo Abljr Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Bwsdpfxow Hc Spo Abler Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: good (used), Year of construction: 2008, functionality: fully functional, We offer for sale: WEEKE (Homag drilling systems) – OPTIMAT BHC 200 – High-precision CNC machining center with woodWOP 8! Technical data: • Year of manufacture: 2008 GUIDE SYSTEM AND DRIVE TECHNOLOGY • - Dust-proof linear guide system • - Rack and pinion drive in the X-axis and ball screw in the Y- and Z-axis • Travel ranges of the axes: - Y = 1822 mm - Z1 = 300 mm - Z2 = 185 mm • Work table: • X = 5250 mm (length) • Y = 1250 mm (width) • Z = 100 mm (thickness) Optimat BHC200 • Control system: HOMAG PowerControl/woodWOP • Equipment: o Automatic tool changer o Multi-spindle drilling head o Integrated vacuum table for secure clamping o Processing of wood, plastic and light metals possible • Condition: good; very well maintained, regularly serviced / last service 03/25 • Modernization measures of the machine: 10/2022 - New machine computer / Siemens industrial PC - woodWOP 8 / Windows 10 update Advantages of the HOMAG BHC200: • Precise and efficient machining for a wide range of materials • Ideal for carpentry shops, furniture manufacturers and custom-made products • Reliable performance, even for demanding projects Scope of delivery: • Machine + Industrial PC • Operating manual • CE SAFETY AND PROTECTION EQUIPMENT - Protective grille in the side and rear area - Three-part safety mat in the front area allows the placement of workpieces in the non-active working area. Inspection and test run on-site possible and welcome! Dismantling and transport must be arranged by the buyer. Bsdpfowx Iidjx Abljwr

Condition: used, Year of construction: 2007, spindle speed (max.): 6,000 rpm, overall weight: 2,500 kg, Fanuc 21T Spindle bore: 42 mm 12-position turret X: 130 mm, Z: 280 mm Bsdsznlaispfx Abljwr Weight: 2500 kg

Condition: used, Year of construction: 2009, filter area: 80 m², suction capacity: 8,000 m³/h, DANTHERM dust extractor, welding fume extraction, automatic self-cleaning cartridge filter, pneumatic, vacuum type for plasma cutting, laser, sandblasting, soda blasting, shot blasting, plastics and catalytic converters, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Bsdjyq Nygepfx Abljwr The fan is located on the clean air side, minimizing explosion risk. Fan power: 11 kW with frequency inverter. Airflow capacity: 8,000 m³/h – 10,000 m³/h Filtration surface area: 80 m² Inlet diameter: 250 mm Stock no.: 1090

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 Jaw width 200 mm Base body type LC 160/200 Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Bodpszfimuefx Ablowr Used, in good condition.

Condition: new, Year of construction: 2026, machine/vehicle number: CATDE200TN7400697, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.931 kg Functional Generator capacity: 200 kVA Dimensions of cargo space: 335 x 117 x 175 cm CE mark: yes Other information Fuel consumption: 34.2 Liter per Hour at 75% Load Generator: Caterpillar A2635L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Additional information Please contact Team DPX for more information = Additional options and accessories = Bwsdpfx Aoxq Uqceblor - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software Bsdpfx Abeu Icc Ajljwr equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: excellent (used), functionality: fully functional, pressing force: 2,000 t, clearance between the columns: 5,100 mm, retraction force: 130 t, HYDRAULIC PRESS LOIRE SAFE mod. EDIMC 2000 Maximum force adjustable slide Ton 200 to 2,000 n. 04 Cylinders Net slide return force Ton 130 Maximum piece dimensions mm 5,000 x 2,800 x 1,700 Maximum piece weight kg 60,000 Upper part weight Kg 35,000 Slide stroke mm 1,500 Maximum clearance between worktops mm 2,500 Minimum clearance between worktops mm 1,000 Front distance between uprights mm 5,100 Lateral distance between uprights mm 2,000 Moving Bolster Front: Front mm 5,000 Lateral mm 2,800 Plan height above zero level mm 650 Bodpfxswlgr Rs Abljwr External stroke mm 4,000 Capacity Ton 60 Slide Plane: Dimensions mm 5,000 x 2,800 Number of guides n° 8 Guide height mm 1,800 Lower blank holder cushion (6 cylinders, force 600-6,000 kN) Upper slide cushion (force 300-3,000 kN) Spark plug diameter (40 mm) and center distances (150x150 / 200x200 mm) Working speed: Minimum mm/sec 3 Maximum mm/sec 110 Approach mm/sec 400 Return mm/sec 350 Stop time ms 219 Safety distance mm 438 Weight without tools kg 365,000 USED MACHINE