Used Grenzebach Mit Zentriereinheit for sale (6,778)

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Lrsdpfxez Ehfas Agret Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone. Lredoyq Rdyjpfx Agret

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive Lodpfx Aozt Ai Esgrjrt with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Lrjdpowcgr Eefx Agrot Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Year of construction: 2009, condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Pneumatically driven with centering unit -with lifting unit -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1950 mm -with frequency converter in the gear motor -Drive: 0.075-0.37 kW Lrsdpfjb A Tfhex Agret -Speed: 14-72 rpm -Height: adjustable -Dimensions: 1950/1120/H960 mm -Weight: approx. 300 kg

Year of construction: 2009, condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Pneumatically driven with centering unit -Belt width: 2 x 30 mm -Width: adjustable Ljdpfjb A Tf Ajx Agrort -Conveyor belt length: 1450 mm -with frequency converter in the gear motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Dimensions: 1580/1380/H1250 mm -Weight: approx. 300 kg

Condition: good (used), Year of construction: 2009, Conveyor belt, belt conveyor, transport belt, belt conveyor -with pneumatically driven centering unit -with lifting unit -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 2450 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Number: 2 conveyor belts available Lredpeb A Nllefx Agrst -Price: per piece -Dimensions: 2450/1380/H1000 mm -Weight: approx. 300 kg

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -Drive motor: 0.18 kW 76 rpm Lredob A H Skspfx Agrot -Conveyor speed: 25.05 m/min -Roller width: 1000 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 960 mm, adjustable -driven: via belt -Number: 3x roller conveyors available -Price: per piece -Dimensions: 1400/1150/H960 mm -Weight: approx. 230 kg

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 820 mm -Conveyor length: 1140 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable -driven: via belt -Number: 2x roller conveyors available Price: per piece -Dimensions: 1150/1140/H960 mm -Weight: 219 kg Lodpob A N Huefx Agrjrt

Condition: good (used), Year of construction: 2009, Conveyor belt, belt conveyor, transport belt, belt conveyor Lrodpfxob A Ndtj Agrst -with pneumatically driven centering unit -Belt width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1450 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Height: adjustable -Number: 2 conveyor belts available -Price: per piece -Dimensions: 1450/1360/H1000 mm -Weight: approx. 100 kg

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -Drive motor: 0.37 kW 76 rpm -Roller width: 1400 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm Lrodpfx Aeb A S Uaogrst -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 1100 mm, adjustable -driven: via belt -Number: 2x roller conveyors available Price: per piece -Dimensions: 1400/1500/H1100 mm -Weight: approx. 230 kg

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven centering unit -stable design -electrically powered -with frequency converter in the geared motor -Drive: 0.075-0.37 kW -Speed: 14-72 rpm -Roller width: 820 mm -Conveyor length: 1140 mm -Roller diameter: 105 mm Lrsdpfx Agsb A I Hmerst -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 1200 mm, adjustable -driven: via belt -Dimensions: 1150/1140/H1200 mm -Weight: 230 kg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS06, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Lrodpfx Aoyktv Sjgrot Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Lrodpfx Asykuh Njgrjt 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: new, functionality: fully functional, Aerial work platform, work basket with platform for forklift (like new) Width: 870mm Depth: 870mm Guardrail height: 1020mm / 1500mm / Total height of forklift protection mast: 2330mm Includes extension: 480mm with side access With forklift mounting distance: min: 550mm – max: 940mm Lodpfszyu Tijx Agrjrt Forklift tine receiver: width max. 190mm x height 90mm Available in stock.

Year of construction: 2009, condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor -Strap width: 2x 30 mm -Width: adjustable -Conveyor belt length: 1950 mm -with frequency converter in the geared motor -Drive: 0.075-0.37 kW Lredolxul Sjpfx Agrst -Speed: 14-72 rpm -Height: adjustable -Quantity: 1 piece available -Dimensions: 1950/930/H960 mm -Weight: approx. 100 kg

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Ljdpfx Aszzrutogrort Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven lifting mechanism -stable design -electrically powered -Drive motor: 0.37 kW 71 rpm -Roller width: 1450 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable Lrodpfx Agsiv Inasrst -driven: via belt -Dimensions: 1400/1650/H960 mm -Weight: approx. 230 kg

Condition: excellent (used), Viessmann Vitoplex 120 kW. Low-temperature boiler with oil or gas burner. 1.0-9.5 Lsdpfx Ajxgnx Sjgrert

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Lrjdpfxeq Am Ivj Agret

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Lrsdpewauaxsfx Agrjt

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Lrodpfjwauarex Agrjt

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Lrsdpfx Aozx Uwxogrst Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: good (used), functionality: fully functional, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2013, loading space length: 7,300 mm, suspension: air, Year of construction: 2013, Equipment: ABS, tail-lift, Good condition. Ledpfxezm Ev Ie Agrert Year of manufacture: 2013. Insulated (body length 7.30 m), air suspension, axle load 18 t GVWR, tail lift, very good tires, good condition. Equipped with electric roller shutters at the front and rear, extendable tandem trailer coupling, hydraulic supports. Internal body length: 7.40 m, internal width: 2.40 m, internal height: 2.30 m.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. Lrodpfx Agjyy Rtzorjt 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.