Used Grieser Vpl 350 for sale (6,116)

Condition: used, Używany mieszalnik planetarny produkcji Grieser (DE) model VPL 350. Mieszalnik posiada dwa mieszadła spiralne i jedno obcierające ściany boczne. Mieszadła są napędzane silnikiem el. 15 kW, 1460 obr/min, 400 V, 50 Hz, przez przełożenia pasowe i przekładnię planetarną. Unoszenie i opuszczanie mieszadeł hydrauliczne. Mieszalnik jest wyposażony w 9 przejezdnych kadzi ze stali ko. Każda kadź ma wewnętrzne wymiary 695 mm x 500 mm głębokości, całkowita pojemność 365 l, robocza ok 350 l. Dwie z kadzi mają w dennicy otwory spustowe wyposażone w zawory otwierane ręcznie. W zestawie znajduje się również mechaniczna wywrotnica do unoszenia i rozładunku kadzi przez przechył. Mieszalnik posiada lokalny panel sterowania i szafkę elektryczną. Dokumentacja techniczna - ogólny podręcznik użytkownika i schematy el, w formie cyfrowej. Maszyna obecnie zdemontowana. Ostatnio pracowała w przemyśle spożywczym. Specifications: Power: 15 kW Hnjdpeyma E Ejfx Akrsu

Condition: used, GRIESER Type: VPL 3.0 Total volume of the mixing chamber: 3.0 liters Usable volume: 0.3 to 2.0 liters Pressure in the mixing chamber: 0 to 1.2 bar (absolute) Pressure in the stainless steel double jacket: N/A Critical speed: 1800 rpm Speed range under load: Impeller mixing tool: 38-282 rpm Scraper: 9-90 rpm Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3 kW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg Sold from our location! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Hedpfx Akezix Ehsrsnu We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2011, first registration: 08/2011, Equipment: ABS, Mercedes CLS 350 AMG, Sail edition Year of manufacture: 06/2011. The vehicle has a completely new rear axle with nine supports, a new turbocharger, the automatic transmission has been flushed and all filters have been replaced, as well as new brakes and a new front spoiler. It has undergone a face-lift! Approximately 20,000 euros have been invested in the vehicle; it runs perfectly and has a lot of power! You are welcome to take it for a test drive with me and see for yourself! Oh yes, it has 322,500 kilometers, but it is in excellent condition! It can easily handle another 300,000 kilometers! Fuel consumption: 5-12 liters of diesel! If you have any further questions, please do not hesitate to contact me! Hnjdpjd Tt Amefx Akrju Thank you in advance!

Condition: used, Year of construction: 2017, zpracování slabé hmoty Hnedpfx Aenqzkpokreu - délka výřezů od 1300 - 4500 mm - průměr kmene od 130 - 350 mm - 100 m3 / směnná výroba - celkový příkon 230 kW. ​Vyhledat podrobnosti 137 / 5 000 Výsledky překladu Výsledek překladu processing weak matter - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW.

Year of construction: 2017, condition: used, processing weak matter Hnodpfjnwm R Nex Akrou - length of cutouts from 1300 - 4500 mm - trunk diameter from 130 - 350 mm - 100 m3 / shift production - total input 230 kW

Year of construction: 2000, condition: used, Punching machine Premium quality Hodeg Dgyxopfx Akrsnu HM 35/350 BKE 200/5 Maximum pressure: 35 tons 5 mm sheet thickness at 40 kp/mm²

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus Hnedpfxsz R Uvxs Akrou 350 mm, with numerous frame saws and grinding machines.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 623 030, functionality: fully functional, volume flow: 10,000 m³/h, intake vacuum (max.): 350 mbar, suction capacity: 6,927 m³/h, intake manifold diameter: 350 mm, filter area: 50 m², noise level: 69 dB, actuation type: pneumatic, total length: 3,920 mm, total width: 1,610 mm, overall weight: 1,160 kg, SCHUKO Vacomat XP TWIN 350 Hnedpfx Aksz Rmkmoreu

Condition: used, machine/vehicle number: 008699, Max. forward feed speed: 36 m/min Number of shafts: 1 Motor power: 40 KW Hsdjzrl Hdspfx Akrjnu Blade number: 3

Condition: excellent (used), CATALOGUE NUMBER: 6913 TECHNICAL DATA - Track width: 360 mm - Shaft width: 350 mm - Max. blade diameter: 350 mm - Blade bore diameter: 80 mm - Max. cutting height: 120 mm From above: - Clamps - Toothed feed shaft - Clamps - Smooth sliding shaft - Shaft with saw blades - Sliding, pressure shaft From below: - 2 sliding rollers in front of the table - Guide - Clamps - Track - Central track lubrication - Electric lifting of the saw blade shaft - Electric lifting of the machine body - Smooth feed speed adjustment - Feed motor: approx. 2.5 kW - Main motor: 30 kW - Overall dimensions (L/W/H): 2500x2300x1900 mm - Weight: approx. 4000 kg ADVANTAGES - Made in the Czech Republic - 2 sliding rollers on the table - Used multi-blade saw Hsdpfx Ajzu R H Ijkrenu - Very good condition Net price: 31900 PLN Net price: 7419 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Year of construction: 2015, condition: used, There are two Arburg ALLROUNDER 270S 350-70 available, an on-site inspection is possible. Hsdpfx Asz S It Sokrjnu

Condition: excellent (used), Year of construction: 2018, operating hours: 1,680 h, functionality: fully functional, total length: 7,003 mm, total width: 1,920 mm, total height: 2,300 mm, overall weight: 2,710 kg, input frequency: 50 Hz, input voltage: 400 V, 8 cup wheels vertical glass grinding machine total number of working meters : 45716 min. glass size height : 35 mm glass thikness : 3 - 40 mm speed : 0,5 - 5m/min work piece weight : 200 kg/m power : 20 Kw Hodpfxoz N Dk Ue Akronu

Condition: good (used), Year of construction: 2023, CNC turning machine Manufacturer: DMG Mori Machine model: CLX 350 V3 Control system: SIEMENS Slim Line Multi Touch Year of manufacture: 2023 TECHNICAL DATA Travel distances - C-axis, degrees: 360 Spindle - Spindle head - Bar diameter: (mm): 66 - Max. speed: (rpm): 5,000 - Drive power 100% duty cycle: (kW): 11 - Drive power 40% duty cycle: (kW): 16.5 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: VDI30 Tailstock - Hydraulic, controlled via M-function EQUIPMENT FEATURES + C-axis + Through-hole chuck, diameter 65 mm (max.) + Direct measuring system for the X-axis Hnedpfxoz Sa Svo Akreu + Chip conveyor + Electronic handwheel + 3-jaw chuck, diameter 210 mm (hydraulic) + DMG Mori IoT connector + Coolant spray nozzle, 5 bar + Hydraulic tailstock + Tool package - Chip conveyor not included Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 22 A, type of input current: three-phase, volume flow: 6,920 m³/h, intake vacuum (max.): 2,630 mbar, suction capacity: 8,000 m³/h, intake manifold diameter: 350 mm, overall weight: 825 kg, Equipment: CE marking, documentation/manual, We are offering this very well-maintained FELDER RL 350 stationary extraction system, year of manufacture 2023, including all pipes and shut-off dampers. Serial number: 35.03.120.23 Rated voltage: 400.0 V Number of phases: 3 Rated current: 22.0 A Rated power: 11.0 kW Year of manufacture: 2023 Extraction port diameter: 350 mm Motor speed: 2,900 rpm Nominal volume flow (at 20 m/s): 6,920 m³/h Negative pressure at nominal volume flow: 2,630 Pa Weight: 825 kg Main fuse: 32 A Hnjdpfx Aeytq Dxekreu Including silencer 5 electropneumatic slide valves and control system Extinguishing device included If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9556, saw blade diameter: 350 mm, type of input current: three-phase, Pneumatic cutoff saw for solid wood, Stromab TR 350, year of manufacture 2023. Connection 3 x 400 V, CE version. Support table of 1000 mm to the left and right of the saw, pneumatic drive for the saw unit, automatic separation of small pieces, safety control with 2 hands, brake motor, emergency stop, and protective guard. Widia saw blade 350 x 30 mm, motor power 4 HP at 3000 rpm, work table height 800 mm, 2 dust extraction ports with a diameter of 80 mm. Sawing capacity 150 x 80 mm and 210 x 30 mm. Equipped with an extended roller conveyor and manual lateral guide. Hjdpfoz Ngkqsx Akrsnu

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Hsdpfx Ajzdtflekrjnu Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2009, condition: ready for operation (used), A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible. Hnsdpfx Akewtg Ihereu

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Hnodpsz I A D Nsfx Akrju Total height: 1300 mm Weight: approx 250 kg

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Hedoz Rrbdopfx Akrjnu Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: good (used), Year of construction: 1995, EISELE circular saw Model VME 350 Hodoz Imqyspfx Akrenu

Condition: excellent (used), Year of construction: 2020, ZOLLER EZset 350 – Professional CNC Tool Setting and Measuring Device – 2020 For sale is a professional ZOLLER EZset 350 measuring device, manufactured in 2020, designed for the precise setting, measurement, and inspection of cutting tools used in CNC machine tools. The ZOLLER EZset 350 is an industrial tool measuring system for offline tool measurement, enabling accurate determination of tool length, diameter, and geometry before machining. The device reduces CNC machine setup times, minimizes setting errors, and increases production efficiency. Technical data * Manufacturer: ZOLLER – Germany * Model: EZset 350 * Year of manufacture: 2020 * Type: CNC tool setting and measuring device (Tool Presetter) * Z-axis measuring range: up to 350 mm * Measuring system: optical, with camera * Control: computer-based with touchscreen * Software: ZOLLER pilot / Drive Snapshot 1.4 – according to the markings visible on the device * Computer panel: MOSTRON PPC3-13 * Device order number: EZS350C1T-00141 * Identification number: PMT0221 * Panel power supply: 12–24 V DC Device functions * Measurement of cutting tool length * Measurement of tool diameters * Inspection of CNC tool geometry * Setting of tool corrections * Optical measurement of cutting edges * Measurement of tools before mounting in the machine tool * Support for tool wear monitoring * Reduction of CNC machine downtime * Increased repeatability of settings Equipment shown in the pictures * ZOLLER EZset 350 measuring device * Integrated optical system * Computer panel with touchscreen * Tool holder / spindle for mounting tools * Work table with frame Hjdpfxoz Si S Dj Akronu * Pneumatic system with pressure regulator * Label printer * Additional printer located under the table * Power and connection cables shown in the pictures Application The device is intended for use in: * CNC machining centers * CNC milling and turning machines * Tool rooms * Precision manufacturing plants * Automotive and aerospace industries * Tool preparation and quality control departments Technical condition The device is used, manufactured in 2020, and is in good visual condition. The device has a calibration mark dated 29.08.2024, valid until 29.08.2025. The set is equipped with a dedicated computer panel and measuring accessories. Inspection and testing of the device are possible by prior arrangement.

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 200 mm Max średnica piły: 300 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Króciec odciągowy: 2x220 mm Wyłącznik bezpieczeństwa Moc silnika wału górnego: 55 kW Moc silnika wału dolnego: 55 kW Zasilanie: 380 V Obroty silnika: 2800 obr./min Producent: A.Costa Wymiary całkowite: Długość: 2700 mm Szerokość: 2220 mm Hnjdpfx Akjichkcorsu Wysokość: 1650 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, WE OFFER AN NICE CONDITION SAW PEGAS AND GONDA HERKULES X-CNC 350X 400 with rollers and many new reserve blades MACHINE WAS USING IN FURNITURE PRODUCTION FOR CUTTING METAL TUBES FOR CHAIRS AND OTHER FURNITURE WITH MACHINE INCLUDED A LOT SPARE BLADES, RAILS CONVEYOR FOR WASTE Hnodpfxsvznkbe Akreu WHEN MACHINE CLEANED WILL LOOKS AS NEW. WE CAN ORGANIZE FOR CUSTMER ALSO TRANSPORT WOLDWIDE

Condition: ready for operation (used), functionality: fully functional, Manual feed of the cutting head Disc diameter 350 mm 3000 rpm Cutting angle adjustment -45/+45 degrees Pneumatic clamping Cutting process initiated with two buttons Safety switch Minimum air pressure 6 bar Hnsdpfx Aez E Dy Hjkrsu Year of manufacture 1995 400V

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 0-243-02-2974, functionality: fully functional, operating hours: 3,566 h, The equipment was purchased new in 2007 for its current location. The factory ceased operations in 2016, and the equipment has not been used since then. The equipment is available for purchase as-is or fully dismantled and loaded onto a truck. The machine has only 3566 hours on it. Prize request of the machine wholeness shows in advertising is 24.500 € vat 0 % Dismantling, packing, and loading to trailer can be offered with 2.680 € vat 0 % Hedpfjzcn Ndex Akrsnu Do not hesitate to contact for more information.