Used Grifols Dg-224 Blood Typing Solution for sale (36,763)

Condition: used, This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition and is ready for intimidate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Pedpjxxz N Uefx Al Sepr Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

Condition: used, This listing is for a Grifols DG-224 Blood Typing Solution. The unit is in full working condition and is ready for immediate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Pjdjxxx Izopfx Al Sopr Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

Condition: used, This listing is for a Grifols DG Therm Incubator Podpjxxwapefx Al Sspr The DG Therm is a digital incubator designed for efficient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

Year of construction: 2021, condition: like new (used), functionality: fully functional, SLM Solutions Model: SLM 280 Build envelope (L x W x H): 365 x 280 x 280 mm (minus substrate plate thickness) 3D Optics Configuration: Twin (2x 400 W) Variable layer thickness: 20 µm - 90 µm Min. feature size: 150 µm Focus diameter: 80 µm - 115 µm Max. scan speed: 10 m/s Average shielding gas consumption during build process: 16 l/min (argon) Average shielding gas consumption during flooding process: 250 l/min (argon) Powder feed: 60-90 kg Electrical connection / Power consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement/consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 2500 mm x 2530 mm x 2620 mm Operated with Aluminum AlSi10Mg! Laser hours: 2,200 h Condition: very good condition Scope of delivery: (see image) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone. Ppodpsyqx R Isfx Al Sor

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Ppodorzq Arjpfx Al Sjr Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: new, Year of construction: 2025, functionality: fully functional, Full automatic pet blowing machine- linear Full Servo Drive. 4 cavities to 2000ml Brand new blowing capacity 4000bph Low energy consumption Psdpfxewrrcns Al Sepr

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 1,800 rpm, table length: 7,000 mm, TECHNICAL DETAILS Travel range X-axis: 5,300 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 2,000 mm Table size: 7,000 x 1,000 mm Tool holder: SK 50 Spindle speeds: 12.5 – 1,800 rpm Spindle motor: 22 kW Feed rate range: 6 – 10,000 mm/min Rapid traverse: 15 m/min Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 70 kW Dimensions & Weight Space requirements: approx. 8.7 x 4.7 x 4.1 m Machine weight: approx. 30 t EQUIPMENT Electronic handwheel Automatic swivelling milling head, vertical/horizontal 2 x 180° Milling head swivels automatically in the rear axis 72 x 5° Podoy Dg I Njpfx Al Sjpr Automatic tool changer (ATC 24) Coolant system Extended cross travel (Y-axis) 1,500 mm Extended vertical travel (Z-axis) 2,000 mm

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Saw blade diameter: 550 mm Saw blade speed: 2800 rpm MACHINE DETAILS Control: E555 touchscreen Ppjdpfxjy Egahs Al Ser Compressed air supply: 7 bar Dimensions & Weight Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Ppodpfxev Nw Npe Al Sor Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to Podpfx Aewwarusl Sopr 186 rpm)

Condition: used, breader suitable for standard and Japanese crumbs and corn flakes all stainless steel mobile Podpfxjy Ich Ts Al Sjpr adjustable speed with air knives with pressure roler belt width 1000 mm dimensions (l x w x h) : ± 2.800 x 1.850 x 2.500 mm

Condition: used, all stainless steel mobile with outfeed conveyor belt width 400 mm Pedey Ichmjpfx Al Sopr dimensions: (L x W x H): ± 2.390 x 800 x 2.285 mm power 13 kW weight 850 kg

Condition: used, all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with electrical hoists suitable for fire protection Pedpfxsy H Dc No Al Sspr overall length : ± 5.400 mm overall width : ± 1.500 mm New electric control box with new electrical components

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm suitable for thermic oil heating (= 214 kW) Ppodey H Dccepfx Al Sor with top hold down belt adjustable speed sediment removal system electrical hoists

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device Pjdpsy Idhhofx Al Sjpr * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, plastic belt Psdpfx Alsy Hig Tj Sjpr belt width 600 mm outfeed height ± 2.600 mm infeed height : ± 350 mm total dimensions : ± 5.800 x 2.400 x 3.150 mm mobile

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Podpfoy Hq Dyex Al Sspr Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, functionality: fully functional, Horizontal Bandsaw Manufacturer: KALTENBACH Model: KBS 620 DG Year: 2007 Technical Data Ppodpfsy H D Raex Al Ssr Manufacturer: Kaltenbach Model: KBS 620 DG Year of manufacture: 2007 Working range: 620 x 350 mm Working range (round): 360 mm Saw band dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15-90 m/min Saw band inclination: 3° Feed rate: 0 - 300 mm/min Saw dimensions: L 3.0 x W 1.2 x H 2.10 m Roller conveyor size: L 8.6 x W 1.1 m (incl. stop) Weight: approx. 2.6 t Equipment • Roller conveyor with CNC length measurement system, L = 8600 mm • CNC stop travel 7200 mm • Minimum quantity lubrication • Laser cutting line indicator • Automatic saw blade cleaning • CNC control Kaltenbach AS620 • CNC stop control EPS 80 • Automatic vertical hold-down • Automatic horizontal hold-down All information without guarantee. A demonstration is available at any time in our showroom.

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Pedpfxey Ex D Ss Al Sjpr Maximum load capacity: 400 t. Turning capacity: 800 t. Maximum speed: 108 cm/min. Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm.

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) Ppodpfx Aeyv H Tijl Ssr • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: used, Year of construction: 2005, x-axis 4000 mm y-axis 2500 mm z-axis 1600 mm w-axis 800 mm Control Heidenhain iTNC 530 table-size 1800 x 2200 mm table load capacity 20 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Pjdpey Hxp Refx Al Sepr Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min Pjdpfjy H Dmhex Al Sjpr - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, We are offering this used HAAS GR-510 gantry milling machine, year of manufacture 2015. Model: GR-510 Manufacture date: 02/2015 Ppsdpfx Ajyxx Azsl Ser Voltage: 354-488 V Phases: 3 Frequency: 50/60 Hz Full load current: 20 A Maximum load current: 35 A Short-circuit interrupt capacity: 10,000 A Wiring diagram: 96/0284 Short-circuit current: 5,000 A Arc protection rating: 208-240VAC models HRC-1; 360-480VAC models HRC-2 Part number (P/N): 29-10048 If you have any questions or require further information, please feel free to message or call us.

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection Ppodpfx Aley E H D He Sjr weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: new, NEW ! all stainless steel loading : max. ± 500 kg (depending on the product) PLC control with 50 programs adjustable speed from 0 up to 9 rpm with vacuum pump Büsch with water filter Psdjy E H Dtepfx Al Sjpr dimensions (l x w x h) : ± 2.550 x 1.300 x 1.650 mm