Used Haco-Baykal Lower Tooling for sale (41,581)

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm Hjdszc Iztepfx Ahzefi MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hfsdpfx Ahjzc Izgjzei

Condition: new, Die block, 80 x 80 mm with V-grooves approx. 86°, length 2500 mm Hsdey Uxw Dopfx Ahzsfi

Condition: good (used), Die block, W x H approx. 3500 x 260 x 190 mm, Hodpfezh D Dyex Ahzsfi . Total length = 3500 mm Length of the reducers = 2600 mm . V-groove, without reducers, opening width approx. 100 mm V-groove, with reducers, opening width approx. 150 mm, H = 220 mm . .

Condition: good (used), Sheetmetalworking tooling Hfjdpfx Ahszc Iypezoi Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2025, condition: new, functionality: fully functional, Partial segment UKB die / lower tool system AMADA 415 mm Hedpfx Ajyqyc Sohzsfi V16 R2 85° V22 R2.5 85° V35 R3 85° V50 R4 85° Partial segments UKB upper tool system AMADA 415 mm, 150 mm, 35 mm, 15 mm and horn left/right 100 mm R 0.8 / 85° H 66.5 Furthermore, we offer a 835 mm die (manufacturer Eurostamp) which is structurally identical to the offered UKB dies. This die is slightly damaged, but fully functional and is offered for €70.00 if interested.

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Hsdpfxjwbvmis Ahzjfi Weight: 110 kg Very good condition

Condition: used, edge dimension: 65 x 65 mm Hfjdebruw Espfx Ahzsi length: 2600 mm weight: 70 kg

Year of construction: 2025, condition: new, functionality: fully functional, Rolleri segmented die / lower tool system AMADA: 835 mm x 2, 200 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm, 10 mm. V16 R2 85°, V22 R2 85°, V35 R2 85°, V50 R3 85°. Hfedpoyqyfmefx Ahzei Rolleri segmented upper tool system AMADA: 455 mm, 300 mm, 150 mm, 100 mm, 50 mm, 40 mm, 20 mm, 15 mm x 2, 10 mm and left horn 100 mm + right horn 415 mm. R 0.8 / 85° H 66.5.

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 24619, functionality: fully functional, operating hours: 2,442 h, power: 15.8 kW (21.48 HP), pressing force: 120 t, stroke length: 260 mm, controller model: Delem DA-66T, working width: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 120 t Max. working width: 3,100 mm Frame spacing: 2,550 mm Rear gauge depth: 750 mm Max. stroke: 260 mm Number of axes: 6 (Y1+Y2+X+R+Z1+Z2) MACHINE DETAILS Hedpfxszk Dy Ts Ahzefi Power: 15.8 kW Drive system: CNC Control: Delem DA-66T Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,000 x 2,700 mm Weight: 8,500 kg Operating hours: 2,442 h EQUIPMENT Finger guard Tools included Crowning system: CNC-controlled Punch holder: Standard Tool holder type: European style

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Hfedpjwwvx Djfx Ahzsi Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Light Guards Full length top and bottom tooling

Condition: used, Year of construction: 2008, total length: 4,900 mm, total width: 2,400 mm, total height: 1,750 mm, Colour: White Weight: 9.500 kg Hfedpfoy Tnzvsx Ahzsi - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 14418 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4060 - Cutting speed [mm/min]: 12 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 4900mm x 2400mm x 1750mm (l x w x h) - Transport weight [kg]: 9500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1998, condition: used, Colour: Grey Polishing sander Löwer FA 4 S Year of construction 1998 Machine no. 9667 Hsdpfjwnh Avsx Ahzsfi 400V, 14.5Amp. 4x 0.37kW motor Working length 3000mm Dimensions: 5000x18050x1600mm (LxWxH), weight 550kg - Year: 1998 - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, HACO ATPL CNC plasma cutter – Used Hfjdpfx Ahszky R Ijzsi Robust CNC plasma cutter for precise and efficient cutting. Specifications: Cutting bed: 3,000 × 1,500 mm Cutting capacity: up to 50 mm CNC controlled Ready for immediate use

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Hfodpfx Asyapdqshzei Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: good (used), Year of construction: 2007, Used 3-meter press brake from Baykal Type: APH 3106 X 120 Capacity: 3100 x 120 tons Hjdozi Rmqspfx Ahzjfi NC control (basic) Lazersafe safety system for high speed 1 set of tooling Year of manufacture: 2007

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Hfedpozi Rl Tsfx Ahzoi Electric cutting angle adjustment Year of manufacture: 1987

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Hfodpsxq Ehxsfx Ahzji

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. Hsdezlpahspfx Ahzofi - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Hfodpszku Hdjfx Ahzei Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: used, Year of construction: 1997, Press Brake HACO type PPM 36100 Command: ATL 550 Capacity: 3150 mm x 100 T Electric Back gear gauge travel: 800 mm Slide travel: 120 mm Year of construction: 1997 Throat depth: 250 mm Distance between uprights: 3150 mm Working Length: 3600 mm Motor power: 5,5 kW Voltage: 380 V Equipped with 2 multi V 90 x 90 mm - length 3660 mm + some tools (see photo) Hfedpfx Ajzku Dvehzsi Dimensions (L x W x H): 3900 x 1600 x 2300 mm Weight: approx 8 T

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Hfjdpfozku Dijx Ahzsi Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: good (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 94094175, sheet thickness (max.): 6 mm, input voltage: 380 V, overall weight: 7,000 kg, total length: 3,500 mm, total width: 2,200 mm, total height: 1,600 mm, HACO TS 3006 Guillotine Shear - Max. sheet thickness: 600 mm - Max. sheet width: approx. 3200 mm Note: The item can be collected from 16.02.2026 on a date to be agreed. Hjdsx Uymmepfx Ahzofi FCA D-73529 Schwäbisch Gmünd – loaded onto truck

Condition: good (used), Year of construction: 2005, sheet width 2560 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2600 mm down holder 15 Stück no. of strokes max. 24 Hub/min oil volume 120 ltr. cutting angle 1.6 ° back stop - adjustable 750 mm Control PRG 911-1 Number of working hours ca. 370 h total power requirement 11.0 kW weight 4700 kg range L-W-H 3190 x 2100 x 1560 mm with only approx. 370 operating hours (!) Hsdpfx Aozh N U Rshzofi Features: - Robust electro-hydraulic oscillating shear - Digital position display for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side stop * With T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms - Electric cutting length limiter * Cutting length limiter to increase strokes per minute - Manual cutting gap adjustment * centrally operated on the left side stand - front support plates - front finger/interference guard - jog mode with push buttons on the control panel - protective guard = safety device behind the machine - operating instructions (PDF)

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Serial number: 8293 Press force: 120 tons Bending length: 3100 mm Maximum stroke: 260 mm Working pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Hsdpfx Ahozk Epvozofi Weight: 7500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm