Used Haffner Kf 20 for sale (28,972)

Condition: used, Year of construction: 1980, Used machine Condition: various small defects Gijdpfx Ajw I U Nhjdhju without chains Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, Used machine Equipment and technical data: Lift left/right: 150 mm, Lift up/down: 150 mm Motor: 1.5 kW with chain Giedoyklfxepfx Adhju Availability: short-term Storage location: Röllbach

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Godpfx Adjvwgayjhsiu

Condition: excellent (used), functionality: fully functional, Chain Mortiser/Chain Chisel KF20, with several chains, very good condition, 1.7 kW, 380 Volt. Machine subject to differential taxation. Gsdpfx Aexf Hzijdhoiu

Condition: used, Year of construction: 1938, Machine cleaned, function tested, trial run incl. various chain sets Used, good condition, low hours Giedpjythcfjfx Adhou Manufacturer: Haffner Type: KF20 Year of manufacture: 1978 Machine no.: 20378 Column-type machine + undercarriage Chain set 12-17 / 50 x 175 J3 Door support Space requirement approx. 750 x 800 x 2000 mm Weight approx. 200 kg Location: 97447 Gerolzhofen, free on truck, unpacked Delivery as seen, without any warranty or guarantee

Condition: used, used manufactured by Haffner Gisdpfxevwf T Ee Adheu type KF20 wall machine workpiece rest lubricant unit total connected power 1,5 kW located in  97447 Gerolzhofen sale in current condition as seen. Without repair work. Pickup in the short term. - free on truck -

Condition: good (used), Type KF-30 In good condition Manual Motor 1,7 kW Tiltable Chain width 18 mm Made in Denmark Transport dimensions 700х700х1800 mm Gjdpfxjdrq Svs Adhsiu

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Giodpfx Asyyxc Rodhju

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Gijdpsifnxxofx Adhju Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-25-20-PA-KF 170922 -Piston: Ø 25 mm Gisdsxy Iutspfx Adhsu -Stroke: 20 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 93/95/H44 mm -Weight: 1.2 kg/pc.

Condition: new, bore capacity in steel (diameter) 13,0 mm x-travel 300 mm y-travel 130 mm turning speeds 100 - 2500 U/min throat 165 mm spindle taper MT 3 MK table-size 490 x 120 mm diameter of hob 30,0 mm motor 230 Volt total power requirement 0,75 kW weight of the machine ca. 50 kg. dimensions of the machine ca. 520x500x740 mm Gjdexabb Hjpfx Adheiu Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request. Giodpfxowtpfpo Adhsu

Condition: ready for operation (used), Festo 556815 / EGC-120-2000-TB-KF-0H-GK toothed belt axis SN: 3S7PLQX3B9D, used, in good condition, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Giodox Erlcspfx Adhou

Condition: ready for operation (used), Festo 556815 / EGC-120-1500-TB-KF-0H-GK-1HL-PN toothed belt axis, SN: 3S7PLVZ1S90 – stroke: 1500 mm, used, in good condition, 100% fully functional, delivery as shown in the photos. Godpsx Erk Ejfx Adhsiu

Condition: ready for operation (used), Festo 556815 / EGC-120-1500-TB-KF-0H-GK-1HL-PN toothed belt axis SN: 3S7PLVZ1S8H – stroke: 1500 mm, used, in good condition, 100% functional, scope of delivery as per photos. Gedpox Erkxjfx Adheiu

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l feed pressure max. 200 bar coolant capacity 950 l Control Siemens total power requirement 45 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m Giodpfx Adozczkzehou

Condition: used, maximum load weight: 211 kg, overall weight: 850 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 2,070 mm, loading space width: 1,080 mm, total width: 1,495 mm, total height: 1,150 mm, A57 GW26GA01495, Signatures of Eintracht Frankfurt players subsequently sealed with clear lacquer Gisdpfx Adsyqdq Hjhsu Product information "STEMA FT 8.5-20-10.1B" incl. jockey wheel and shock absorbers approved for 100 km/h with certification* * Optimal road handling due to stable chassis with safety V-drawbar * Robust rubber suspension axle with independent wheel suspension * Maintenance-free compact wheel bearings * Sturdy side panels with double corrosion protection through GALVALUME (aluminum-zinc coating) * Large and stable lashing hooks for load securing (model-dependent) * Robust cast steel angle lever locks (model-dependent) * Slip-resistant, waterproof phenolic plywood floor * All-round protected multifunction lights * Incl. lid/cover Low-loader, manufacturer: STEMA, type: FT 8.5-20-10.1 with lid/cover, gross weight: 850 kg, inertia braked, lid color: green/white, 100 km/h approval ...and much more. Subject to errors and prior sale.

Condition: used, mileage: 32 km, power: 121 kW (164.51 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,474 mm, total height: 2,786 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 70275 Errors and prior sale excepted! Weight specifications refer to base vehicle before conversion. ---- SPECIAL EQUIPMENT * 2 batteries * Increased front axle load to 2000 kg * Bi-xenon headlights with static cornering light, LED daytime running lights * Twin rear doors with 256° opening angle (without windows), no rear window, with retaining magnets * Wheels: All-season tires (winter-rated) * Wheels: Alloy wheels 6.5 J x 16 - 6.5 J x 16 with 235/65 R16 tires * Sliding door, left * Front mud flaps * Seat Package 3A: Driver seat electrically adjustable in 10 ways – double passenger seat – height-adjustable headrests – driver and outer passenger seat individually and variably heated – folding tray on double passenger seat – driver's inside armrest – lumbar support for driver – passenger airbag – side airbags (right & left) – head/shoulder airbags (right & left) – seat upholstery: fabric – heated steering wheel – leather steering wheel * Technology Package 6P: Exterior mirrors electrically adjustable, heated, and foldable – Blind Spot Assist incl. Cross Traffic Alert – audio system – fog lights – LED downlight – Pre-Collision Assist (camera and radar-based) – Rear Emergency Braking Assist – Lane Departure and Lane Keeping Assist – Enhanced Traffic Sign Recognition System – Park Pilot System front/rear – Adaptive Cruise Control with Stop & Go Function – Surround View Camera – Navigation Giodpfx Adjxquz Uehju * Refrigeration conversion: cooling while driving and stationary * Deep freeze unit -20°C * Webasto 2kW Air Top 2000 STC air heater FURTHER EQUIPMENT * 1 battery * Driver airbag * ABS with electronic brake-force distribution – ESP with traction control – Hill Start Assist – Crosswind Assist – Safety Brake Assist – Rollover Protection – Emergency Brake Support including emergency brake light * Exterior mirrors electrically adjustable and heated * Battery: battery runtime, programmable to 10 minutes * On-board computer with consumption and mileage display (e.g., remaining range) as well as outside temperature display and Ford ECO-Mode * High roof * Headliner in the driver’s cab * Twin rear doors with 180° opening angle (without window) * Electric front windows with quick down/up function for driver * Electronic parking brake * Ford Easy Fuel – Comfort filler cap with misfuel protection * FordPass Connect – incl. live traffic information and WiFi hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Heated windscreen * Lockable glove compartment * Interior lighting with delay function, front reading lights * Automatic climate control with automatic temperature regulation * 70-litre fuel tank * Cargo area lighting * Steering column adjustable for height and reach * eCall emergency call system * Diesel particulate filter * Radio accessories: 12-inch multifunction display and Ford SYNC 4 communication and entertainment system with voice control plus Bluetooth and USB interface – integration of various telephony functions and hands-free operation via voice command – SMS readout function with display on the multifunction display – integration of storage media – emergency call assistant – Ford Power-Up software updates – support for Android Auto and Apple CarPlay, AppLink (wireless) – capacitive touchscreen technology – 15 different languages * Wheels: full-cover wheel trims * Wheels: tire repair kit * Windscreen wipers with rain sensor

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Gsdpeq Ny R Sofx Adhjiu

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Gedshwt H Ajpfx Adheiu Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System Gsdsxf Ez Ujpfx Adheiu - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: excellent (used), "SOFTFORMING" LEFT-side SINGLE-SIDE SIZING and EDGE BANDING Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control / Software PC 22 / WoodCommander Adjustable feeding speed (m/min ) 10 - 40 Working line (work units support tables), manual adjustment mm 30 - 80 SIZING PART: Spraying unit (Anti-sticking liquid) Double Hogging Units KD 10 (2 x Kw 6,6) Fine Trimming unit for softforming (2 x Kw 1,85) 0°-20° Belt sanding unit (abrasive papers) for straight edge KS 10(mm 120 x 2100) Free space mm 700 EDGE-BANDING PART: Glueing Unit (Hot Melt + Quick Melt Unit) E34 softforming Pressing rollers (revolver) both for straight and shaped edges (softforming) G (4 stations) With top and bottom rolling knives (In-lay) Edge coils supporting unit E3 (No. 6 of reels) Gisdpfx Adjt N H Tashou Snipping (end-cutting) unit HL 84 (2 x kW 0,8) 0°-30° (max 25 m/min) 1st Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic 2nd Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic Milling grooving unit UF11 (1 x kW 4) 0°-90° Profile Scraping unit PN20 (Pneumatic adjustment) Finish processing unit (Glue scraper + Buffing unit) FA11

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Technical data: - Barrel width 1 - 15 mm - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° Gedei Ab Unspfx Adhjiu - Drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 319237, We are offering this very well maintained KNOLL KF 600/2000 coolant system with band filter, year of manufacture 2007. Gedpfoyknkkox Adheiu The unit is fully functional and has been operated with cutting oil. 2 new rolls with matching paper filters are included. Description Knoll coolant system with band filter Fully functional Previously used with cutting oil Includes 2 rolls of suitable paper filters

Condition: good (used), Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-40-200-B-PPV-A-KF 532319 -Piston: Ø 40 mm Giedpfxoxwlkto Adhju -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 365/155/H55 mm -Weight: 5.4 kg/pc.