Used Handilaz Handilaz Mini Particle Counter for sale (6,203)

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Kedsxhf Tiepfx Ahienc Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 9) The unit is in full working condition and is ready for immediate release. The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). Knedpfxsxtnquj Ahisc The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). Knsdpfx Ahjxv Ab Hsijc The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: used, Year of construction: 2011, offer consists of: laminating machine Gemini C 400 A - developed for a digital printing machines outputs lamination - pneumatic system of laminating rollers pressure with an easy thrust control - Anti-Curl-Mechanic Knjdpfx Ae Adq I Iohioc Technical details: - feeder: flatpile feeder; loading height: 230mm - Format: min. 320x250mm; max. 380x580mm - Paperweight: 115-350g/qm - film: 20-45 µm - film-types: OPP, Nylon - Inner diameter roll: 70-80mm - outer diameter roll: max. 400mm - capacity: 0-15m/min; max. 1800 sheets/h with Format B3 - warming up time: approx. 10 Min - weight: 365kg - power supply: 230 V, 2,3kW, 16A - floor space: : 74 x 280 cm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: good (used), Filter testing, filter test system, filter measurement system, filter test system, particle counter, dust particle counter -Particle counter: Laser Particle Count -Type: CLJ-E -Number: 2 particle counters available -Price: per piece -Dimensions: 280/205/H135 mm Kjdpfeyk Dipjx Ahienc -Weight: 2.4 kg/pc.

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Knsdpfexv A T Nox Ahisc Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Manufacturer: Becomix. Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. - PLC control integrated into a mobile table. -Mixing vessel full vacuum to 1 bar, double jacket 4 bar. Kedeyx Ibgjpfx Ahijnc

Condition: used, New: Yes Kjdpfxs Aarxts Ahionc Please contact us for more information.

Condition: used, New: Yes Year of construction: 2024 Kodpfxsz S D E Rj Ahijnc

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. MINI-BMS 105 / 5-10 tons / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide pads) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 Knsdpfxeyltv Uo Ahiec - Approx. 200 mm high Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. For the drive, a self-contained hydraulic system is recommended. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted! Internal No.: 170048 Year of manufacture: 2023 Please contact Marius Herden for further information.

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​ Kjdexv A Nqjpfx Ahijnc

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. Knodpfx Ahez Dxcmeijc The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Condition: new, functionality: fully functional, empty load weight: 1,600 kg, Year of construction: 2026, For sale: JKW-16 tracked mini excavator with an 18.4 kW diesel engine. The machine's operating weight is 1600 kg, and the maximum digging depth is 1800 mm. The excavator features a 360° rotation, a cabin, and work lights. A significant advantage of this machine is its extendable tracks, which allow the excavator to be narrowed for passage through tight spaces, gates, or openings, and then widened to increase the track gauge and provide more stable operation during digging. This excavator is ideal for construction, earthmoving, gardening work, and digging trenches for installations, cables, and pipes. Technical specifications: * Model: JKW-16 * Engine: Diesel * Power: 18.4 kW * Operating weight: 1600 kg * Digging depth: 1800 mm * Dimensions: 2270 × 1100 × 2270 mm * Bucket capacity: 0.04 m³ * Tracks: rubber, extendable * Rotation: 360° 🎁 FREE INCLUDED: Knedpjzudq Hjfx Ahijc * Narrow bucket – ideal for digging trenches for installations, cables, and pipes, * Wide ditching bucket, * Standard bucket installed on the excavator.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates Knsdsyltvuopfx Ahijc - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: like new (used), spindle diameter 35 mm 5 speeds from 3,000 to 10,000 rpm motor power 5.5 kW Maggi 4-roller feed with stepless speed control tenoning carriage with angle setting scale Kodezx U Nuspfx Ahienc worktable 120x730 cm 760 kg year of manufacture 2001 can be purchased without feed unit

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) Knjdpfx Aev Da Dlehiec - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: used, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 1,800 kg, Year of construction: 2000, operating hours: 4,182 h, drive type: Diesel, Mini excavator Condition: Ready for use and fully functional Technical condition: good Description: Mini excavator KUBOTA KX41-2 VC - - Year of manufacture 2000 - - 4182 operating hours - - 1800 kg operating weight - - like-new Powertilt MS 01 (year of manufacture 2023) - - mechanical quick coupler - - 2 used digging buckets 25 + 50 cm - - 1 used ditching bucket 100 cm - - - HYDRAULIC ADJUSTABLE UNDERCARRAGE 100 - 130 cm - - - work lights - - 3-cylinder Kubota diesel engine 15.3 kW (20 hp) - - NEW, complete service performed - - some pins and bushings new - - like-new Powertilt - - swivel joint NEW - - good rubber tracks Quick coupler, buckets, Kedpfxe Aa Hbis Ahijnc 3rd control circuit, work light rear, work light front, heater, fully enclosed cab

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (at tel. ). Seppi M. MINI-BMS 105 forestry mulcher / MS08 / 5-10 tons / CUT CONTROL / NEW / in stock & immediately available Price: €16,790.00 net / €19,980.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches shrubs and trees up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 40 - 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required with OPT 372 hydraulic 190° swivel device Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net A self-contained hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Mr. Herden (tel. ) will be happy to assist you. Knodpfxjyltvns Ahiec Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: new, functionality: fully functional, mileage: 1 km, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 07/2026, emission class: euro5, shovel volume: 0.2 m³, digging bucket width: 4,200 mm, Year of construction: 2026, machine/vehicle number: GT1000, Equipment: additional headlights, adjustable boom, adjustable chassis, steel tracks, GT1000 mini excavator Mini excavator The GT1000 mini excavator is a lightweight and exceptionally maneuverable machine weighing 1000 kg, designed for precise earthmoving, installation work, and landscaping. Thanks to its compact dimensions, this machine is ideal for locations with limited space, such as private plots, narrow passages, or work inside buildings. Engine The machine is equipped with a reliable Yanmar 3TNV70 engine that meets the EURO 5 emission standard. The engine, with an output of 13.6 hp (10 kW), ensures stable, quiet, and fuel-efficient operation, which guarantees high reliability and a long service life. Work equipment and operation The GT1000 mini excavator features a precise hydraulic system that is operated via ergonomic joysticks. The counter-cylinder on the boom provides extra protection for the working parts and increases safety during operation. The standard bucket with a width of 420 mm and a capacity of 0.02 m³ enables precise digging work. Working range The GT1000 offers a maximum digging depth of 1680 mm and a maximum digging height of 2490 mm. The dumping height is 1760 mm, and the maximum digging reach on the ground is 2430 mm, ensuring efficient execution of basic earthworks. Maneuverability The minimum digging radius is 1340 mm, and the turning radius of the platform is only 733 mm, ensuring very good maneuverability in tight spaces and easy operation of the machine. Dimensions The total length of the machine is 2650 mm, the total width is 930 mm, and the total height is 2200 mm. Thanks to its compact design and extendable tracks, the machine is easy to transport and deploy in confined spaces. Technical data Model GT1000 Engine Yanmar 3TNV70 EURO 5 Weight 1000 kg Power 13.6 hp Bucket width 420 mm Bucket capacity 0.02 m³ Joystick Yes Counter-cylinder on the boom Yes Swivel boom Yes Extendable tracks Yes Max. digging reach on the ground 2430 mm Kodpfxozifkqj Ahisnc Max. digging depth 1680 mm Max. digging height 2490 mm Max. dumping height 1760 mm Turning radius 1190 mm Min. digging radius 1340 mm Max. lifting height dozer blade 175 mm Total length 2650 mm Total height 2200 mm Total width 930 mm Total track length 1100 mm Platform swing radius 733 mm Ground clearance upper structure 380 mm Undercarriage width 950 mm Track width 180 mm Track width 320 mm

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 31.0.3986, input voltage: 380 V, type of input current: three-phase, TOP PROFESSIONAL DIVIDER WITH ROUNDING – KÖNIG MINI REX MULTI Are you looking for a reliable way to streamline the production of small baked goods, save time, and ensure perfect consistency for each piece? We offer for sale a top-of-the-line, automatic dough divider and rounder, the König Mini Rex Multi. This compact machine is an ideal choice for both artisanal bakeries and smaller industrial operations. Thanks to the interchangeable insert system in the dividing drum, it represents an unmatched universal solution on the market. TECHNICAL SPECIFICATIONS: • Hopper capacity: approx. 15 kg of dough • Total weight range: 8 – 330 g • Weight range with rounding: 8 – 140 g • Power consumption: 0.75 kW (energy-efficient operation) • Machine weight: 300 kg • External dimensions (w x d x h): 660 x 1790 x 1800 mm (does not take up unnecessary space) • Construction: Solid stainless steel design with wheels for easy handling in the bakery. After use, the discharge conveyor can be folded up, saving space in the workplace. The machine is sold in used condition, after a complete cleaning and basic repair, and is fully functional. Knodpfx Asz Tz Ifohisc

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers. Knodpfxjzz Hfye Ahiec

Condition: used, Year of construction: 2013, operating hours: 4,631 h, Equipment: all wheel drive,

Year of construction: 2021, condition: like new (used), functionality: fully functional, Specification Capacity 30 Ton Kodpfx Ahjziahdoijnc Working length 1300mm Stroke length 100mm Throat depth Maximum open height without tools Fast speed of beam Bending speed Return speed 200mm 300mm 100mm/s 10mm/s 90mm/s Backgauge travel 300mm Length 1500mm Width 1200mm Height 1910mm Approximate weight 2000kg Machine equipped with Cybelec CybTouch 8 control (X & Y axis) Top and bottom tooling Light guards

Condition: used, Year of construction: 2017, operating hours: 2,694 h, Rubber track, used vehicle Vehicle No. 3329, CAT 301.7D mini excavator, year of manufacture: 2017, operating hours: 2694, hydraulic connections for attachments, hydraulically adjustable undercarriage, 3-cylinder Yanmar diesel engine with 13.4 kW, 1,300 mm grading blade, 220 mm rubber tracks, CAT mechanical quick coupler with lifting hook, 1 x TL 300 mm, weight: 1,977 kg. For inquiries please contact us. Subject to errors and prior sale. Knods Aa E Uhepfx Ahisc

Condition: used, functionality: fully functional, power: 21 kW (28.55 HP), fuel type: diesel, empty load weight: 3,550 kg, Year of construction: 2003, operating hours: 6,106 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Technical condition: good Description: Excavator - Crawler excavator - Mini excavator HITACHI EX36UE - 3.55 tons operating weight - Year of manufacture 2003 - 6,106 operating hours - mechanical quick coupler - 2 used trenching buckets 25 + 80 cm - 1 used ditch cleaning bucket 1.40 m - Cab, heating - Work lights front and rear - 3-cylinder ISUZU diesel engine 28 HP - very robust excavator - 3rd control circuit for hydraulic ditch cleaning bucket up to quick coupler is available - good rubber tracks - Hydraulic tilting ditch cleaning bucket available at an extra charge of €1,800 excl. VAT Knsdpfxj Aa Hbpj Ahioc Quick coupler, buckets, 3rd valve, rear work light, front work light, heating, full cab,