Used Hans Schoen Tes C 25 for sale (66,163)

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics Ljdpfx Aevw Spmsa Rsrr

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Lrodpfxsfcw Apj Aa Rer Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg. Lrjdpfx Aaszf Ilce Ror

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Lrjdpfxozvfp Hs Aa Rjr Post-travel: max. 10 mm Motor power: 3 kW

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) * Lodpeu Nfmyofx Aa Rsrr

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Lrjdpfx Ajry Trpsa Ror Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: Ljdpfox Ry Nyex Aa Rsrr • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Ljdjy S A Nfepfx Aa Rsrr

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Lrjdpfx Asyq R D Hoa Rjr

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Lrodpfxslmmwrj Aa Rsr

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. Lrjdpfx Aajx Ehmyo Rsr It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate.

Condition: excellent (used), Year of construction: 1985, functionality: limited functionality, Description Technical information Swing over bed 420 mm Distance centre tot centre 1000 mm Max longitudinal travel Z-axis 1028 mm Max cross travel X-axis 335 mm Spindle coneA2-6 Dia of spindle bore 56 mm Power on the spindle20/25 hp Number of speeds16 - 4000 rpm CommandMazatrol Cam T3 Total power needed18,5 kW - 32,9 kVa Length 3734 mm Width 1893 mm Height 2401 mm Weight 4400 kg Toolchanger yes Number of tools 16x - rotating yes Lrsdpfxsvk E Ayo Aa Rjr milling tools C-axis Robo flex automatic loading system tooling included Measuring arm included MAZATROL CAM T-3 CNC Accessories Tailstock, Evoquator, Tool Attachments, Presetting Machine weight 4700 kg Axis C Yes

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Lsdsgbvkvjpfx Aa Rorr Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Lrsdpfx Aotiwgioa Rjr Side passages Ground level installation

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Lrodpfx Ajx Ehlcoa Rsr

Condition: new, Siemens Simovert 6SE7022-5FA87-2DA0 braking unit E version C > unused < in opened original packaging, 100% functional Lrodpfx Aezu Eyvoa Rjr

Condition: refurbished (used), Year of construction: 1987, machine/vehicle number: 3163, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 360 mm, table length: 220 mm, Equipment: safety light barrier, Schoen hydraulic double-column press NH 25 (3163) completely overhauled machine – year of manufacture 1987/2026 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table (width): 360 mm Lodpfezd Akqex Aa Rorr Table (depth): 220 mm The machine is undergoing a general overhaul new control system new light curtain hydraulic system revised

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm Lrodpfx Aaslp U A Is Rsr weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm Ledsvnwfbopfx Aa Rsrr table surface area 300x300 mm ram surface Ø105 mm hole in the table Ø60 mm table height 1050 mm tool hole in ram Ø30 mm total power requirement kW dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Lrodpfxju T Uvio Aa Rjr

Condition: used, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, total height: 1,025 mm, total width: 520 mm, total length: 1,135 mm, water tank capacity: 25 l, empty load weight: 40 kg, The Kärcher BD 43 / 25 C is a 2022 model and has only been used for 5 operating hours. It has been completely overhauled and refurbished in our in-house workshop. During this process, each component was checked for functionality and cleaned. Two new, maintenance-free batteries have been installed. A bracket allows the suction head to be easily transported on the machine. The Kärcher BD 43 / 25 C is perfectly suited for small to medium-sized areas such as shops, workshops, or schools, etc. In short: - Yellow, highly visible, and robust controls - Easy operation thanks to the EASY-Operation panel = very short learning curve - Small, compact unit = maneuverable and easy to handle even in tight spaces - Convenient home-base system - Simple handling of cleaning and maintenance tasks - Separate charger Technical data: Lsdpeztpfaofx Aa Rjrr Working width, brushes: 430 mm Tank volume, fresh/dirty water: 25 liters Theoretical area performance: 1720 m²/h Practical area performance: 860 m²/h Maximum battery runtime: approx. 2 hours Permissible total weight: 115 kg

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Lredpfx Ajziiypja Rsr Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 25 l, KARCHER BR 40/25 C Ep SCRUBBER 400mm cleaning head equipped with new medium-hard cylindrical brushes for use on any surface. New natural rubber squeegees 230V power supply The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: mains Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 400mm PPL0.5 cylindrical brushes NEW suction hose NEW drain hose Squeegee blade with new rubbers 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 25-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. Ljdpfx Aozl Tu Noa Rsrr The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: good (used), High-voltage system, high-current system, high-voltage system, transformer -Manufacturer: Himmel, high-voltage system, high-current system -Type designations: Sky HG 64-25 KTSHigh frequency: 0.7 MHz -Rated power: 25 kW -Individual components/technical data: see photos, nameplate -Dimensions: 1605/880/H1840 mm Lrjdpfxspy Rx No Aa Rjr -Weight: 830 kg

Condition: used, machine/vehicle number: 8830469, Starting resistor, series resistor, resistor Lodpjb Uhvmefx Aa Rsrr -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg