Used Hanseatic Hs 10-3100 for sale (32,038)

Condition: used, Year of construction: 1991, Max. cutting length: 3100 mm Max. cutting thickness: 10 mm steel Motorized backgauge up to 1000 mm with digital display Side stops and table extensions cutting length limitation Cutting edge lighting Weight: approx. 10,000 kg Iodpfohlnv Uex Ab Nsat Attention: Back stop works slightly inaccurately (+/- 1 mm)

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° Iasdjuagxpopfx Ab Not no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Max. cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motorized backgauge with digital display Manual cutting gap adjustment Cutting length variably adjustable Cutting edge lighting New knives Iaedpfx Asw I Tu Nsb Njt

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, good condition, machine ready for immediate use for further technical details, see pdf file (brochure) Iasdpjyzxkwjfx Ab Nst located in Neustadt/Weinstr. Transport available at additional cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons Iodpfx Aeyxvgqob Njat The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, Swing cut guillotine shear Iaedpfx Aolac Dreb Not Cutting length 3100mm Material thickness steel 10mm Knife for stainless steel Touch control Cybelec backgauge 1000mm Cutting gap adjustable via control Delivery time 3 months

Condition: new, sheet width 3100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 14 Stück no. of strokes 13 Hub/min oil volume 260 ltr. cutting angle 2,0 ° throat 350 mm engine output 22,0 kW back stop - adjustable 1.000 mm weight 10.575 kg. range L-W-H 4,05 x 2,5 x 2,17 m ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Ijdpjxabdbefx Ab Noat Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws Iasdpfxoxab I Hs Ab Nst * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail Iaedjwnyu Depfx Ab Not along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Bending angle: 145 degrees

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° Isdpfx Abopxmxce Nsat - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 - 10 complete with pneumatic rear sheet metal support. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC INTERSPACE-BLADE ADJUSTMENT Material cutting capacity 450N/mm2 10 mm Material cutting capacity 700N/mm2 6 mm Cutting length 3100 mm Distance between shoulders 3600 mm Variable cutting angle 0.5 - 3 ° Blade press cylinders 14 Strokes per minute 7 - 13 Hollow 250 mm Motor power 22 kw Millimeter square and two sheet supports 1000 mm Rear register stroke 1000 mm with PNEUMATIC SHEET SUPPORT. Iedpjfh R Iljfx Ab Njat Approximate weight : 10.5 Ton

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Iaodpfekh Niqex Ab Not Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: used, Year of construction: 1988, total length: 4,300 mm, total width: 3,000 mm, total height: 2,500 mm, Colour: Grey Weight: 13.700 kg Price: On request - Year: 1988 - Documentation available: No - CE certificate present: No - Serial number: 15322 - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 3100 - Backgauge depth [mm]: 1000 - Transport dimensions: 4300mm x 3000mm x 2500mm (l x w x h) Iodpfsyym Ihsx Ab Noat - Transport weight [kg]: 13700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1988, total length: 3,500 mm, total width: 2,000 mm, total height: 2,000 mm, Colour: Grey Weight: 4.600 kg - Year: 1988 - Documentation available: Yes - CE certificate present: No - Serial number: 14685 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge depth [mm]: 750 - Transport dimensions: 3500mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 4600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Isdpfoyl Uvpex Ab Njat

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 3,100 mm, sheet thickness (max.): 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls driven by hydromotor and planetary gearbox * Hydraulically opening head for easy removal of bent parts * Very easy operation with mobile control panel * Lower rolls positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile- and pipe-bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Infinitely adjustable hydraulic speed control * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Ijdjw Sld Repfx Ab Neat Pre-Bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Iajdpfx Abow Slbve Nst Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum, or stainless steel materials Highly suitable for bending materials into round and various diameters Lower and side rolls move up and down hydraulically via direct linear motion Protected against overload Upper roll driven by electric motor and planetary gearbox. Lower roll driven by cardan coupling system. Both rolls are driven Positions of the rolls easily readable via three digital displays Bent workpiece can be easily removed thanks to the hydraulic opening head Very easy operation with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of the rolls Conforms to EU safety standards and bears the CE mark User manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (elevator) support for large-diameter bending Hydraulic side supports for large-diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Isdow Slkkopfx Ab Noat Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Model: KR210 R3100 ultra with 4.5m linear axis Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload: 210 kg Kuka Controller KRC4 Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Iodpfxsxuwlwj Ab Neat Kuka connection cables Kuka linear axis Type: KL1500-3 T Year of manufacture: 2013 Length approx. 4.5 m Travel path approx. 3.5 m KRC4 cable drag chain Weight: 2,200 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW - 50, maximum load weight: 777 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 113 1000 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Sidewall height incl. railing: 43cm Loading platform height: 52cm Gross vehicle weight: 1000kg Payload: 777kg Braked single-axle low loader Overrun brake and handbrake by AL-KO 1000kg axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension latch 15mm strong, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg pull force each 13" tyres 2x U-chocks Net/rope hooks on frame 13-pin plug Front marker lights Rear lights with reversing light, rear fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY PRICE REDUCED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front wall - Loading ramps Iedpferk Ikqsx Ab Neat - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Flat tarpaulin with or without bows - High tarpaulin 120cm, openable on all sides - Rear supports More accessories available on request! Plus freight to Gera and vehicle registration document €100 net Pictures are examples and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock, ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including caravan axles. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by in person.

Condition: excellent (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN80 -Width: 190 mm -Nominal pressure: PN10 Isdpfeb A Ru Tjx Ab Njat -Weight: 18 kg

Condition: good (used), Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system Iodpfx Aeh Uhmkob Nsat -Designation: HSD A3-100, HSD P3-100, P3-100, 1- 4.5 bar -Diameter: 19mm -Length: 45mm -Number: 21 pieces available -Total Cost -Total weight: 0.5kg

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor Iajdswvv Rwopfx Ab Net - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz Iasdowrihnopfx Ab Njt - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Iedsxzf Dzspfx Ab Noat Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, distance between stands: 2,550 mm, control type: CNC control, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Iodpfx Ajxyw Sbjb Neat Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Hydraulic toolclamping Yes Power 7.5 kW