Used Hb-Therm 100 Z1 for sale (25,460)

Condition: good (used), Year of construction: 2017, heating cooling device HB Therm 100 Z1 Serie 5 Wasser, 100°C 9 KW new Service ! (art.3179) Podjwhygyopfx Ag Djpr year: 2017-2018 price: 3.250 € contact: Mr. Rainer Eckerle

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Psdpeyzmagofx Ag Dspr Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Ppedpfx Agex Emfwj Dor Cooling capacity: 30 kW Heat transfer medium: Water

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 160°C 9 KW + new Service ! year: 2017-2018 price: 4.950 € contact: Mr. Rainer Eckerle Ppsdpfx Agokn Enuj Der

Year of construction: 2017, condition: good (used), heating cooling device HB Therm 140 Z1 Serie 5 Water, 140°C 9 KW + new Service ! year: 2017-2018 Ppodpfx Agokn Elnj Der price: 4.650 € contact: Mr. Rainer Eckerle

Condition: used, max. temperature 160 °C operating pressure 20 bar heating capacity 8 kW Cooling capacity 30 kW Capacity 1 kW rate of flow 60 l/min Ppedpfx Agsy Erzks Dor The temperature control unit is, in our assessment, in good used condition. The offer consists of 4 units: 1 x manufactured in 2002 1 x manufactured in 2005 2 x manufactured in 2011 Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2019, operating hours: 8,000 h, condition: like new (used), functionality: fully functional, 4 ENGEL e-temp H16-100 temperature control units Cleanroom version with speed-controlled pump Temperature is software-limited to 120°C via e-flomo Heating capacity: 16 kW, pump capacity: 60 l/min, cooling capacity: 30 kW Connection cable USR-52 The price refers to one unit! There is also an HB Therm controller available, enabling independent operation of the units. The controller is not included in the price but can be purchased separately. Please refer to the documents below. There you will find the HB Therm invoice to the previous company as well as a list of additional equipment! Ppjdpfsw Hm D Aox Ag Djr

Condition: excellent (used), Year of construction: 2005, Welcome We offer Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Ppsdpsvyuvuofx Ag Djr Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) Pjdov H Ad Hopfx Ag Dspr 16KW Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: ready for operation (used), Year of construction: 1999, Peripheral devices HB-THERM Pedpfowuvh Hex Ag Djpr TYPE: HB-CW 90 4 units Year of manufacture: 1998-1999

Condition: excellent (used), Several HB-Therm flow meters and water distributors available Condition: as new – from cleanroom production The following versions are available: 3-way 5-way 6-way 12-way 13-way 16-way Note: Original new prices can be found in the attached documentation. I purchase all machines and peripheral devices directly from customers at a fair price. The subsequent sales price is calculated reasonably so that all three parties – seller, buyer, and myself as the intermediary – make a small, fair deal. Unsolicited purchase offers from various used machinery dealers are therefore not welcome. Ppjdpfsw D Eh Iex Ag Djr

Year of construction: 2001, condition: good (used), HB Therm 140 U1 Series 4 Water, 140°C 9 KW Ppodpowl Ingsfx Ag Dsr year: 2001-2005 overhold ! price: 1.650 € contact: Mr. Rainer Eckerle

Year of construction: 2018, condition: good (used), heating cooling device HB Therm 160 Z2 Serie 5 Water, 160°C 17 KW year: 2017-2018 price: 5.950 € contact: Mr. Rainer Eckerle Pjdpfx Ajk Tapwsg Djpr

Year of construction: 2018, condition: good (used), heating cooling device180 Z2 Serie 5 Water, 180°C 17 KW New Service ! price: 7.950 € Podpfek Tap Tjx Ag Djpr contact: Mr. Rainer Eckerle

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: Rod20x10RES, ABUS ZHB overhead crane runway, approx. 20x10m Ppedpfjxr S Dcex Ag Der Load capacity / lifting capacity: 1000 kg (1 ton) Technical data: Runway made of ABUS HB250 rails The system is delivered complete: ABUS HB rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Abus GM electric chain hoist, travel drives, and pendant control Lifting height approx. 3.5 m The crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock!

Condition: used, Plasma Cutting Unit HYPERTHERM Type Max 100 Pjdpfxoyah Sae Ag Depr Plasma cutter with mechanized torch Machine No. 70-2513 Year of manufacture: 1990 Output: 100 amps = 80% duty cycle 89 amps = 100% duty cycle Cutting capacity: up to 32 mm sheet thickness Continuously adjustable Torch lead length: 22 meters Compressed air connection: 4.7 bar Power supply: 400 V, 50 Hz, 63 amp plug - Torch package with straight torch (without switch) for robotic operation - Separate push-button for starting the plasma cutter Required space L x W x H: 850 x 700 x 1100 mm Weight: 225 kg In good condition

Condition: good (used), Manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology Ppedjb A R T Aopfx Ag Der -Screw connection: G 1/2" -Display: up to 10 bar -Quantity: 6 available Price: per package -Weight: 0.5 kg

Condition: used, functionality: fully functional, Thermo Scientific FH100X NO.72-320-100 Peristaltic Pump. Thermo Scientific FH100X peristaltic pump is ideal general purpose tubing pumps for high-repeatability, precision metering, and worry free performance in a variety of life science, industrial and process applications. The broad flow range capability of this unit make them ideal for laboratory to pilot process scale-up requirements. FH100X unit, our highly regarded peristaltic pump technology is combined with innovative digital control to provide robust performance at an economical value. This unit offer a reliable alternative to lab piston metering pumps, gear pumps and small circulating pumps used in life science laboratory applications. This stackable, variable speed pumps are self priming, able to operate dry, and contain no valves or seals eliminating replacement needs. Fluid contacts only the tubing, providing for contamination-free pumping in high-purity applications. Ppsdpfx Asupvvkog Dsr Good working condition. Please check out our other listings as well.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Pjdpfx Asvf E Aveg Djpr Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: new, 100 mm roll diameter 315 mm bending speed 5 m/min bending capacity - flat iron max. 12 x 20 mm 75 mm Drive 11 kW Ppedpfxjy H N Ido Ag Djr weight 2.600 kg range L-W-H 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: like new (used), Year of construction: 2023, functionality: fully functional, • Measuring range: 100-150 mm • Number of micrometers: 2 pieces Ppodpfx Aey Hqu Sog Dor • Setting rings: Ø125 mm • Hoffmann item no.: 428550 100-150

Condition: used, mileage: 247,000 km, power: 243 kW (330.39 HP), axle configuration: 6x2, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 8,600 mm, loading space width: 2,470 mm, loading space height: 2,450 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, tail-lift, traction control, General information Year of manufacture: 2020 Axle configuration Front axle: Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle 1: Double wheels; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Rear axle 2: Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 12.728 kg Carrying capacity: 13.272 kg Ppedpfx Agoy Em Ths Der GVW: 25.999 kg Functional Tail lift: Dhollandia , tail lift, 2500 kg Make of bodywork: Lambaret Thermoking T 100R Height of cargo floor: 223 cm Cooling engine: diesel and electric = Additional options and accessories = - Camera system - Heated driver's seat - Heavy duty engine brake - Lifting axle - Lock diff - Outside temperature display - Radio with bluetooth - Rear air suspension - Reversing camera - Visor = Remarks = MOT valid until 24-01-2027

Condition: used, Year of construction: 1997, operating hours: 3,861 h, overall weight: 1,500 kg, rotor diameter: 235 mm, total length: 2,500 mm, total height: 2,500 mm, total width: 1,500 mm, rotor width: 794 mm, power: 11 kW (14.96 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, No. 04527 Ppsdjy Hlgiepfx Ag Djr Single-shaft shredder Vecoplan VAZ 100/80 U40 Used, year of construction 1997, 3861 operating hours The waste shredder VAZ 100/80 is designed for shredding wood waste, pallets, crates, particleboard and fiberboard, paper and cardboard, plastics, etc. The machine is most commonly used to produce fuel chips from wood waste, wood scraps, and pallets. Feed opening 1000 x 800 mm LW Universal rotor, tool size 40 Connected load 13 kW, drive power 11 kW Throughput capacity for logs 250 - 350 kg/h Throughput capacity for particleboard 800 - 1000 kg/h Screen hole size (diameter) 25 mm Rotor diameter 235 mm, rotor width 794 mm, speed 95 rpm Rotor mounted in self-aligning roller bearings with steel housing Feed unit made of channel steel, driven by hydraulic cylinders Guided in brass rails, with rollers on the sides Main drive via gear motor with two-stage worm gear Motor speed 95 rpm Automatic foreign object breakage protection PLC control, automatic mode / manual mode Hydraulic unit with 2 operating speeds 2 suction connections on the sides, 200 mm each Currently, the machine is designed so that the wood chips fall downward. If the opening at the bottom is closed, an extraction system could be connected. Includes 1 new counter blade, various cutting blades, complete technical documentation Transport dimensions approx. 2500 x 1500 x 2500 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 2014, Spänex SHB 100 R K1 briquetting press Motor capacity: 100 kg/h Throughput: 0.9 m³/h Pedpfoy Dc Tusx Ag Djpr Briquette diameter: 70 mm Motor power: 7.5 kW Year of manufacture: 2014 Price: 10,500.- Better photos coming soon

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 Pedpfx Agjwmbcyj Depr - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels