Used Heating System, Wood Chip Heating for sale (45,527)

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Kdsdpfx Asyalbljfdok

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Kodpfxjyhlrmo Afdodk

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. Kdedpfx Asxwhw Aofdjk FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 Kdodpfxjw Rpdre Afdek without discharge unit (can be provided if needed)

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ Kdsdpfxewahhvs Afdjk 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers Kodpfxsmuzq Eo Afdedk   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors • Boiler construction:   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Kdedpjttqd Nofx Afdek Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Kdodpsr R Ewljfx Afdok Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Ksdpsyrhd Tsfx Afdjdk Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution).

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Kdsdpovvmvfefx Afdjk

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled complete with boiler, stocker unit, and discharge system Kdjdpfxev Ngq As Afdjk

Condition: used, Wood chip screening plant Chip screening plant Width 1,9m Ksdpfxjtxblke Afdedk Length 5.3m Height 0.8m 1st grid 40x40mm 2nd grid 15x15xmm Double scraper for screening system Total length 7.5m (2m straight, 5m upwards) Outer flange width 760x610mm Scraper width 400mm + 250mm Gear motor 4 kW Speed 39 rpm

Condition: new, functionality: fully functional, machine/vehicle number: SH 200, Heat Recovery Co-Generation System, featuring: Integrated by: Wartsila Heat Recovery Steam Generator System; Alfa Laval Steam Header SH 200, Alfa Laval Vertical Exhaust, Gas Boilers, Model AV-6N, Alfa Laval Steam Drum HK-10-2, Alfa Laval Feed Water Control Unit, Alfa Laval Condensate Transfer Pump RDD 901, NCE Boiler Washing Water Tank, Alfa Laval Blow Down Cooling Module, Alfa Laval Aalborg Oy WES Technik T-Piece Damper, Wartsila Logics Controls, Alfa Laval R1 Heat Recovery, Universal Vent Silencer, SWAS pH Water System (containerized). Kedpsyf N Umjfx Afdjdk Sistema de cogeneración con recuperación de calor, que incluye: integrado por generador de vapor de recuperación de calor Wartsila; cabezal de vapor Alfa Laval SH 200; escape vertical Alfa Laval; calderas de gas Alfa Laval, modelo AV-6N; tambor de vapor Alfa Laval HK-10-2; unidad de control de agua de alimentación Alfa Laval; bomba de transferencia de condensados Alfa Laval RDD 901; tanque de agua de lavado de calderas NCE; módulo de enfriamiento de purga Alfa Laval; compuerta tipo “T-Piece Damper” Aalborg Oy WES Technik de Alfa Laval; sistema de control lógico Wartsila; recuperación de calor Alfa Laval R1; silenciador universal de ventilación; sistema de agua SWAS para control de pH (contenedorizado).

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Kdodpfxew Hfzae Afdsk Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment - Fully automatic drying process - Fast installation in under 24 hours - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.

Condition: used, Well-functioning wood dust extraction system. Kdsdpeyzw Easfx Afdek

Condition: used, Wood chip discharge hoppers with auger Ksdpfx Aoy Dtqksfdsdk

Condition: used, Drum Screen for wood chips: - drum - sea container - with electric motor Kdedpsy Dp Eqefx Afdok

Condition: used, Year of construction: 2014, This Holzstar chip extraction unit, type: SAA 3003, is being auctioned in our online industrial/machinery auction due to the ContiTech Transportsysteme site closure. Kedpfx Ajyz Sh Nefdjdk

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150°C or just water Max. thermal output up to 850 kW Kodpfxey Dfd Ns Afdodk Suitable for dry material

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal output modulation —— Technical data: • Year of manufacture: 2012 • Output: 102–109 kW • Firing capacity: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water content: 190 liters • Weight: approx. 1010 kg —— Key features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-adjusted) • Automatic cleaning and ash removal • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic (self-cleaning) grate • Very low power consumption (~0.18 kW) • Modern, energy-efficient system —— Feed technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with automatic pellet suction system (vacuum system / pneumatic feed) ➡️ Pellet operation is very straightforward: • Connection to pellet storage with flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual refueling ➡️ Alternatively, the boiler can also be used for wood chip operation (by connecting a discharge/feeding system for chip storage) —— Condition: Kdsdey A Ei Nepfx Afdjk • Recently dismantled • In perfect working order until removal —— Viewing: Viewing possible by appointment at our 1500 m² warehouse in Mosonmagyaróvár, Hungary

Condition: used, Year of construction: 2023, tank capacity: 100,000 l, GENERAL Equipment: Venting/air release Design: Horizontal Year of manufacture: 2023 Notes: Manhole diameter approx. 600 mm; includes optical leak detector, tank fitting for heating oil, overfill prevention device, and ladder with working platform; External diameter: 2,900 mm Total length: 16,050 mm Heating/cooling: present Location: External storage Minden Technical documentation: Drawing, various documents Nameplate: Volume: 100,000 liters Product-contact material: Steel Condition: used Cylindrical length: 14,960 mm Last application: Heating oil TANK Ksdpfx Ajyckwqefdjdk Support type: Saddles welded on HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: on the tank

Year of construction: 1990, condition: good (used), Throwing fan ideal for wood chips, with feed conveyor belt approximately 3 m long. Blade span 900 mm, equipped with 11 kW motor. Kdsdpfoyy Uzcsx Afdsk

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Kedpfx Aeyt Ihbjfdjdk Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: used, Year of construction: 2009, Fröling Turbomat 500 – Wood Chip Biomass Boiler (2009) ⚙️ Technical Specifications • Model: Fröling Turbomat 500 • Year of manufacture: 2009 • Nominal output: 450 kW (W40) • Maximum output: 495 kW • Water capacity: 750 liters • Operating pressure: 6 bar • Max. temperature: 110 °C • Weight: approx. 6,800 kg • Manufacturer: Fröling Heizkessel- und Behälterbau GmbH – Austria ⸻ 🔩 Key Features • Fully automatic de-ashing and heat exchanger cleaning • Four-layer, fireproof high-temperature combustion chamber lined with refractory material • Water-cooled feed channel – suitable for fuels with higher moisture content • Stoker grate with continuous, efficient combustion • Lambda control with multi-zone air management and low emissions • Automatic induced and draft fan control • Heavy-duty industrial design, maintenance-friendly • Fuel types: wood chips (G30–G50), pellets, sawdust, biomass ⸻ 💡 Benefits • High efficiency, fully automatic operation • Low maintenance requirements, long service life • Reliable performance even with fuels with higher moisture content • Ideal for industrial and municipal heating systems ⸻ Ksdpfexmrwfox Afdjdk 📍 Location: Mosonmagyaróvár, Hungary

Condition: used, Fröling Turbomatic TMC – automatic wood chip boilers (35–110 kW) Several Fröling Turbomatic TMC units in stock – ready for immediate delivery. Output (kW) – Price (net) 35 kW – 5,000 EUR 55 kW – 6,000 EUR 70 kW – 7,000 EUR 85 kW – 8,000 EUR Kdedowakktjpfx Afdjk 110 kW – 10,000 EUR The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feeding screw (dosing auger), which automatically transports the fuel directly into the combustion chamber. The complete extraction system (raumaustragung) is usually not included (available separately). 👉 For the 110 kW model, the complete extraction system is already included. ⸻ Key technical features: • Lambda-controlled combustion for optimal efficiency and low emissions  • Automatic grate with vibration and tipping function for self-cleaning operation  • Multi-pass heat exchanger with automatic cleaning (WOS system)  • Automatic ash removal system (combustion chamber + heat exchanger)  • Induced draught fan ensures safe operation even with poor chimney conditions  • Large refractory-lined combustion chamber for stable high-temperature combustion  ⸻ Additional benefits: • Modular system – easy installation • Individual drives → high system stability • Automatic adaptation to fuel quality and moisture ⸻ 📍 Location: Mosonmagyaróvár, Hungary 📦 Immediate availability