Used Heller Mch 250 for sale (10,266)

Condition: excellent (used), Year of construction: 2006, Heller MCH 250 4 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 12,500 rpm Travel distances: X: 800 mm Y: 800 mm Z: 800 mm Pallet size: 630 x 630 mm Lodpfoy Nycksx Ammjac Max. tool length: 600 mm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Twin pallet Technical Specification Taper Size SK 50 Lsdpfoy H D T Uox Ammsac

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • 4th axis rotary table, 1-degree indexing • Probe (workpiece/tool probing system) Laodpfx Amey Epfvomsc Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HELLER MCH 250 was manufactured in 2005. It features an XYZ travel of 800 x 800 x 800 mm and a pallet size of 630 x 630 mm. The machine is equipped with a 100-tool automatic tool changer and a 6-pallet pool for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 630 x 630 • Tool magazine: 100 ATC • 4th axis: 360° Additional equipment • 6x pallet pool • Probe Technical Specification Ljdpfx Amoy Egbrsmoac Taper Size SK 50

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Lodpfx Amsuxdhujmsac

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW Laodpetqqk Njfx Ammec weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: Siemens 840 D Travel distance X-axis: 1,000 mm Laodsy Nzh Uopfx Ammec Travel distance Y-axis: 800 mm Travel distance Z-axis: 800 mm Tool changer: 80-fold Tool holder: HSK 80 Max. tool weight: 25 kg Max. tool length: 500 mm Max. tool diameter: 228 mm Spindle speed up to: 6,000 rpm Pallet dimensions: 630 x 630 mm

Condition: excellent (used), Year of construction: 2006, Heller MCH 280 C Lsdey Nybgepfx Ammeac 5 axes Year of manufacture: 2006 Control: Siemens 840 D Spindle speed: 8000 rpm Travel paths X: 1000 mm Y: 1200 mm Z: 1100 mm Pallet size: 630 x 630 mm Rotary table: 360,000° x 0.001° Tool magazine positions: 400 Interface: HSK 100

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 52, number of axes: 4, This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details. • Automatic tool changer (ATC): 52 tools Additional equipment Ljdpfxjy Ef D Ee Ammeac • Twin pallet changer Technical Specification Taper Size SK 50

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment Ljdpfx Aox D Skmommeac • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: excellent (used), operating hours: 16,800 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, torque: 822 Nm, controller manufacturer: SIEMENS, controller model: 840D, workpiece length (max.): 1,890 mm, workpiece width (max.): 1,450 mm, table width: 800 mm, table length: 1,000 mm, rotational speed (max.): 6,000 rpm, spindle motor power: 43,000 W, spindle nose: ISO 50 DIN 69871, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MODEL MCH 450 C DOUBLE PALLET 5-AXIS CNC Control: SIEMENS 840D WORKING AREA: X-axis travel (longitudinal): 1600 mm Y-axis travel (vertical): 1200 mm Z-axis travel (transversal): 1700 mm LINEAR GUIDES: Size 55 DRIVE SYSTEM: Diameter x Pitch: 50x25 mm FEED FORCE: X axis (S3-40%): 15,000 N Y axis (S3-40%): 15,000 N Z axis (S3-40%): 17,500 N FEED RATE: Working feed rate (X, Y, Z axes): 1 - 40,000 mm/min Rapid traverse (X, Y, Z axes): 40,000 mm/min Acceleration (X, Y, Z axes): 4.0 m/s² SPINDLE: Front bearing diameter: 100 mm Spindle taper: ISO 50 DIN 69871 Spindle motor power (S1-100% / S6-40%): 28/43 kW from 500 rpm Max torque (S1-100% / S6-40%): 536/822 Nm up to 500 rpm Spindle speed: 45 – 6,000 rpm Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 10 Ledpfxoydfcds Ammsac ROTARY TABLE: Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 6 Max clamping weight on pallet: 2,500 daN Max tangential moment: 40,000 Nm Max tilting moment: 34,000 Nm Rotation time 45°: 2.9 s Rotation time 90°: 3.5 s Rotation time 180°: 4.6 s PALLET CHANGER: Coupling surface as per DIN 55201 A1 Pallet dimensions: 800 x 1000 mm Workpiece dimensions: - Positioning diameter in working area x height: 1890 x 1450 mm Pallet change accuracy (X, Y, Z axes): 0.02 mm Pallet change time: 27 s X/Y/Z AXIS POSITIONING ACCURACY: Direct measurement with optical scales Positioning tolerance as per VDI/DGQ 3441: 0.010 mm COOLING UNIT WITH ROTARY VACUUM FILTER – HIGH PRESSURE 70 BAR: Coolant tank capacity: 2,500 l Coolant pump 4 bar, flow rate: 230 l/min Coolant pump 4 bar, flow rate: 70 l/min High-pressure pump 50 bar, flow rate: 28 l/min TOOL CHAIN MAGAZINE WZM 100: Tool magazine positions: 100 Max tool length (from spindle nose): 600 mm Max tool diameter (with adjacent tools): 112 mm Max tool diameter (without adjacent tools): 228 mm EQUIPPED WITH: - Chip conveyor (modified for handling very long chips) - Tool breakage detection - Handwheel (for axis control and movement within the working area) - Tool change in masked time (tools can be loaded/unloaded from magazine automatically without stopping the machine program) USED MACHINE YEAR 2007

Condition: used, Year of construction: 2002, Technical details: Lasdpjw T Tntsfx Ammsc x-travel: 1000 mm y-travel: 800 mm z-travel: 1100 mm weight of the machine ca.: 20 t dimensions of the machine ca.: 6,80 x 3,0 x 3,20 m Tool bore: SK50 Tool taper: HSK-A 100 turning speed range: 45-6.000 U/min size of pallet: 630x800 mm change time of pallets: 21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to *

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Lsdpsxwpmxofx Ammsac Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld;

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Lodpfezdpvgex Ammjac Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Sawmill Line Equipment for Sale Lasdpfx Amoyyv Udsmoc We are offering for sale part of a sawmill production line (the EWD band saw has already been sold). The following equipment is available: - Complete conveyor systems - Esterer edging saw (year of manufacture: 2000) - Multi-rip saw (250 kW German motor, year of manufacture: 1992) - SDOP 600/3 drum chipper (year of manufacture: 2010) - Full conveyor system for sorting sawdust and offcuts into the chipper The line has been in operation until 02/2026 and is fully functional. ✔ Available as a complete set or as individual machines. For more information, please contact us via email or WhatsApp.

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 250 cm x 110 cm, disassembled. Laodpfx Amjzf Hwdomjc - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8690,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth - Saw shaft - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft Lodpey Tiuqjfx Ammsac - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Lsdpfxoy St Sks Ammoac Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: new, For sale: Professional industrial pump from the renowned manufacturer KSB. The pump is in new condition (ex-stock/warehouse storage) – unused, with possible storage marks visible in the photos. ⚠️ Sale concerns the pump only – electric motor not included. ⚙️ TECHNICAL DATA Manufacturer: KSB Model: ETACHROM BC 80-250 / 1104 Year of manufacture: 2000 Capacity: up to approx. 160 m³/h Head: approx. H-14 Type: centrifugal pump Construction: single-stage Connections: flanged Design: industrial, heavy-duty 🔧 APPLICATIONS Water installations Industry Process systems Cooling Liquid circuits ✅ CONDITION New – stock item Unused Fully operational construction No motor included 📦 ADDITIONAL INFORMATION Ledpfxoywcq Tj Ammoac ➡️ Option to purchase an electric motor ➡️ Matching motor available – additional cost: €700

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D • Tool magazine: 160 • Tool holder type: HSK-63A Lsdox D I Alepfx Ammjac

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm Lodsy S Ahbepfx Ammeac - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Mounting: Long taper, diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm Ledpfx Amjfimg Homeac Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated.

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm total power requirement 60 kW weight of the machine ca. 12.5 t dimensions of the machine ca. m H E L L E R (Germany) 5 Axis - CNC Controlled Horizontal Machining Centre Ljdot Hwrhspfx Ammsac Model FST- MC 160 / 800 / E Year 1998 Only approx. 500 hours in operation _____ Working range: Longitudinal stroke X axis 800 mm Vertical stroke Y axis 630 mm Cross stroke Z axis 560 mm NC rotary table Tilting A axis 180 ° Turning B axis 360 ° Size of pallet, approx. 250 x 620 mm Tool holder HSK 63A Spindle speeds, infinitely variable 63 - 20,000 rpm Feeds / quick feeds XYZ 1 - 70,000 mm/min Spindle drive 24 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Weight, approx. 12,500 kg Accessories / Special Features * 5-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D, allows working operation on 5 sides. * Workpiece handling system: Workpiece is mounted on a pallet outside the machine and is transported via a conveyor into a lifting/turning device, which brings the workpiece onto the table, where it is automatically clamped and machined. * 40-position tool magazine with tool replacement door, and laser-operated tool breakage control. * Internal high pressure coolant supply, 50 bar. * Coolant preparation unit with filter and temperature control. * Oil mist exhaust. * Separate cooling aggregate for motor spindle and switch cabinet. * CO² fire extinguisher. * Chip conveyor. * Complete covers for the working area. Machine comes from the design department of an car manufacturer and was only used for trials. The new price in 1998 was approx. 1.3 million DM (EUR 650,000.00). The machine is very suitable for medium-sized production series. Ideal for aluminium.

Condition: new, Heller SL90 F A 23 Uni Pro CNC 90 interface card in opened original packaging, 100% functional. Ledpfxji Ea E Ro Ammjac

Condition: ready for operation (used), Heller uni-Pro 24.000914 monitor with 20.003 / E 23 control card, used, in good condition, 100% functional, scope of delivery as per photos Lodpfx Amjy Nrwaemjac