Used Helmerding Eh 35 B for sale (47,000)

Condition: used, Eccentric Press, C-Frame Press, Helmerding EH 35 B, Used Machine Manufacturer: Helmerding Gbodpfx Ajy D Uhdslmol Type: EH 35 B Year of Manufacture: 1985 Weight: 2500 kg Technical Specifications: Press Capacity: 35 tons Stroke Length: 70 mm Table Dimensions: 600 x 450 mm Operating Modes: Continuous / Single stroke (Inching) Safety: Two-hand safety start control Dimensions: Overall Dimensions: 1020 x 1600 x 2400 mm Additional Information: Note: The base plate (bed plate) is not included with the machine.

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Gjdpfxjyath Ts Almsbl Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Weight: 2050 kg Gbjdpfx Aljwxxr Asmjl Equipped with press safety valve

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm Gbedpfx Aljxh Sx Esmsl no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW Gbodefua Dcspfx Almjl • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Condition: good (used), Year of construction: 1978, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERL135B -Pressure capacity: 135 tons -Coupling: pneumatic -Drive: 11 kW -Stroke: adjustable 20 - 120 mm -Table size: 670 x 1050 mm -Table cutout: 200 x 325 mm -Projection: 360 mm -Punch holder: Ø 50 mm -Insertion height 445 mm -Dimensions: 2530/1200/H2410 mm Gjdpfxjyvuq Nj Almjbl -Weight: 8008 kg

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 SN: 68351 Permanent magnet three-phase servo motor, hole spacing of the mounting holes: 152x152 mm, drive shaft diameter: 32 mm, used, normal signs of use, 100% functional, shipping costs please inquire separately! Please ask for transport charges! Gbsdpfx Aji D Ii Delmjl

Condition: like new (used), functionality: fully functional, machine/vehicle number: VF7YCBPA912Y80744, mileage: 20,000 km, first registration: 02/2024, fuel type: diesel, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, airbag, fog lights, onboard computer, soot filter, traction control, CITROEN JUMPER 35 2.2 BlueHDi 140HP L4 Dropside 4.15 m Gjdjyl Ikyepfx Almsbl Company vehicle - National - Single owner Payload 1000 kg Air conditioning Bluetooth radio Cruise control Multifunction steering wheel VAT Exposed: €21,950.00 + 22% VAT = €26,779.00 VAT included 24-month warranty Possibility of financing and customized leasing Available with zero down-payment, with low monthly installments or balloon payment options Trade-ins and scrappage accepted Mileage CERTIFIED both on contract and invoice. While every effort is made to ensure all vehicle details are accurate, there may be discrepancies in the listed features and/or photos. We advise you to verify the details with one of our consultants, who will be at your disposal for any additional information.

Condition: used, mileage: 13,000 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 06/1995, loading space length: 3,140 mm, loading space width: 2,030 mm, loading space height: 1,500 mm, color: red, Equipment: ABS, Volkswagen LT 35 Fire Service Vehicle Double Cab Old-Style Analog Tachometer Gjdpfx Aeu Tzk Telmebl Internal Ref. No. for inquiries: 1124854 * Equipment and logistics transporter for fire brigade use * Condition: very good * Original 13,000 km * First registered: 22/06/1995 * Engine: 70 kW / 95 hp * ABS * Rear axle differential lock * Double cab * Radio * Rear bench seat * Blue light on roof * Shelving systems with aluminium frame construction Tyres: Front axle: 185 R 14 70% Rear axle: 185 R 14 70% ----Price: €11,900 + 19% VAT. For further questions, you can reach us at the following phone numbers: * We speak: German, English, French and ????? Errors, mistakes and prior sale reserved.

Condition: used, mileage: 158,500 km, power: 121 kW (164.51 HP), first registration: 12/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2025, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 12 m³, loading space length: 3,740 mm, loading space width: 1,660 mm, loading space height: 1,770 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, Sonderausstattung: Dachablage / Ablagegalerie Dach vorn, Dokumentenhalter (Smartphone / Tablet), Einparkhilfe elektronisch, Fahrassistenz-System: Notbrems-Assistent, Federung hinten verstärkt, Getränkehalter vorn mit Aschenbecher und Zigarettenanzünder, Laderaumtrennwand mit Fenster, Sitzsockelverkleidung, Steckdose im Lade-/Fahrgastraum Weitere Ausstattung: Airbag Fahrerseite, Außenspiegel elektr. verstell- und heizbar, Außenspiegel mit Weitwinkel, Blinkleuchten in Außenspiegel integriert, farbig, Bremsassistent, Dachantenne Digital (kurz), Heckflügeltüren (Öffnungswinkel 180 Grad), Karosserie/Aufbau: Kasten Grossraum Standard, Kopfstützen gepolstert, Kraftstofftank: 90 Ltr., Lenksäule (Lenkrad) höhenverstellbar, Motor 2,2 Ltr. - 121 kW Blue-HDI FAP KAT, Radstand 4035 mm, Reserverad in Fahrbereifung, Schadstoffarm nach Abgasnorm Euro 6d, Schiebetür Lade-/Fahrgastraum rechts, SCR-System (AdBlue-Technologie), Seitenschutzleisten, Sitzbezug / Polsterung: Stoff, Sitze im Fahrerhaus: Beifahrerdoppelsitz, Sitze im Fahrerhaus: Fahrersitz mit Lendenwirbelstütze, Start/Stop-Anlage, Zul. Gesamtgewicht 3,50 t. Gbsdpfxoxx Eubj Almjl The vehicle has an engine failure and body damage. Please call us at WhatsUp/Viber also) E-mail:

Condition: used, mileage: 109,900 km, power: 120 kW (163.15 HP), first registration: 10/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2027, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,500 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, soot filter, Special Equipment: Audio system: radio with CD player (supports MP3) – integrated display, electrically adjustable and heated exterior mirrors, reinforced rear suspension, high-capacity alternator, USB port Additional Equipment: Driver's airbag, exterior mirrors with wide-angle section, integrated turn indicators in exterior mirrors, colored, body/chassis: standard flatbed, fuel tank: 90 liters, height-adjustable steering column (steering wheel), engine 2.0 L – 120 kW Blue-HDI FAP CAT, wheelbase 4,035 mm, spare wheel with road tires, low emissions in accordance with Euro 6 exhaust standard, side protection strips, seat cover/upholstery: fabric, driver’s cab seats: twin passenger seat, driver’s cab seats: driver’s seat with lumbar support, permitted gross vehicle weight 3.50 t Gedpsykxiwsfx Almsbl

Condition: used, mileage: 65,680 km, power: 96 kW (130.52 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0551. GW222H01591 ---- SPECIAL EQUIPMENT - Passenger-side airbag, switchable - Air conditioning FURTHER EQUIPMENT - ABS - Storage compartments Gjdpfx Aexcc Uyolmobl - Driver's airbag - Exterior mirrors including integrated side indicators - Mechanical brake assist - Roof light in cargo area - Double roof light in cab - Tachometer - ESP, ASR - Front electric windows - Gearbox: 6-speed manual - Rear door (double-wing), closed - Paintwork: Solid colour - Reach-adjustable steering wheel - Manual headlight levelling - Multifunction display - Particulate filter: Diesel particulate filter - Upholstery: Fabric - Radio pre-wiring (cables and antenna) - Black side protection strips - Right-hand side sliding door, without window - Power steering - Double passenger seat bench - Height-adjustable driver's seat - 12V socket in cargo area - 12V socket in centre console - Partition wall, closed - 8 lashing eyes in cargo area - Service interval indicator - Immobiliser with transponder - Heat-insulating glazing - Central locking with remote control ...and much more. ---- Vehicle is in unprepared/original condition! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / Leasing possible with no down payment! Any questions? We are happy to advise you!

Year of construction: 1977, condition: ready for operation (used), An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible. Gjdpfx Aloypr Spomobl

Condition: like new (used), functionality: fully functional, Height/lumbar/armrest adjustable driver's seat, Overcab, Reinforced dual-member suspension (carrying loads), 2-seater front passenger bench seat, Central locking with plip, Digital radio antenna, Uniform spare wheel, Citroën Connect Box, Standard steel wheels, Gbodpfx Asv Nh E Uslmsl Electric and heated exterior mirrors, Hill start assist, ABS, AFU, ASR and ESP, Driver airbag,

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Gederm Nqmepfx Almjbl Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: used, Year of construction: 1980, Pressing force 1,100 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Strokes per minute 35 / 70 1/min Gsdjyg Ecpspfx Almsbl Machine weight approx. 5,100 kg Further data and images available on request

Condition: used, Year of construction: 1984, Press force 1,500 kN Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Machine weight approx. 8,000 kg Gbjdpfx Asyg Ebxjlmjl Further data and images available on request

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith Gbedpfxetrhf Ae Almel - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm Gbsdpfx Aelp U Rvelmol stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm Gbjdpop Apxhefx Almel no. of strokes 50 / 75 Hub/min ram - range of adjustment 85 mm table surface area 1150x670 mm ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm

Condition: new, Balluff BTL0NLH BTL7-G110-M0200-B-S32 Micropulse displacement transducer, serial no. according to photo, unused in opened original packaging, 100% functional, scope of delivery according to photos Gjdpei D T Ehsfx Almobl

Condition: used, mileage: 103,500 km, power: 121 kW (164.51 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,998 mm, total width: 2,050 mm, total height: 2,522 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Citroen Jumper Panel Van L3 H2 with 3 seats – original 103,500 km – immediately available – * Diesel – Displacement: 2,179 cc – 121 kW / 165 hp – Euro 6 – Green emissions sticker * 6-speed manual transmission – Wheelbase: XXXX mm – with built-in shelving – * German vehicle – German registration documents – one previous owner – * Vehicle is immediately available and ready for collection – * Please schedule an appointment for viewing – * Contact person: Mr. Andreas Vogel * The information provided online constitutes non-binding descriptions. * These do not represent guaranteed characteristics. Gbsdpfxsw A Ekao Almjl * The seller is not liable for typographical or data transmission errors. * Subject to alterations, errors, and prior sale. Special Equipment: Passenger side airbag, audio system: digital audio system (DAB) with CD player, MP3-capable and touchscreen, driver assistance system: emergency brake assist, rear door (opening angle 270 degrees), navigation system with color display, USB port, reversing camera system. Additional Equipment: Driver’s airbag, electric and heated exterior mirrors, wide-angle exterior mirror, integrated turn signals in exterior mirrors, color-coordinated, brake assist, short digital roof antenna, body type: large-volume panel van, padded headrests, 90 L fuel tank, cargo partition, height-adjustable steering column (steering wheel), engine 2.2L - 121 kW Blue-HDI FAP CAT, wheelbase 4035 mm, full-size spare wheel, low-emission per Euro 6d-TEMP standard, sliding door on right side (cargo/passenger compartment), SCR system (AdBlue technology), side protection mouldings, seat upholstery: fabric, cab seats: front passenger double bench, cab seats: driver’s seat with lumbar support, start/stop system, permitted gross weight 3.5 t.

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm Gbodpfx Alet Ei Hnomol distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 25 t, table width: 360 mm, table length: 560 mm, throat depth: 180 mm, total length: 1,680 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 1,750 kg, ram adjustment: 60 mm, Projection 180 mm Smallest distance between press bed and ram at maximum stroke at bottom, Ram adjustment at bottom 50 mm Largest distance between press bed and ram at maximum stroke top, ram adjustment top 340 mm Fold-through hole in table 150 x 100 mm Gjdpfx Aet Sgruolmebl Table adjustment 150 mm Ram stroke 12-80 mm

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min Godpfod Nl E Uex Almebl weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement