Used Hera Hss Iii for sale (1,134)

Year of construction: 1988, condition: used, sheet width 1500 mm plate thickness 3 mm weight of the machine ca. 4 t Dcodpfx Aslp U Txsd Nsg dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: used, Year of construction: 1978, sheet width 3100 mm Dcodpfxsuagxps Ad Neg plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III Dedpoq A I Upefx Ad Njcg No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Year of construction: 1981, sheet width 2600 mm plate thickness 5 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min voltage 380 V / 50 Hz total power requirement 5,5 kW weight 4500 kg dimensions of the machine ca. 3600 x 2200 x 1600 mm Equipment: • elektric-motoric back stop • manual die clearance • 2 x lay-on arms • Foot switch • Knives as replacement Dcsdpoxuv Hyefx Ad Njg

Condition: used, Max. cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motorized backgauge with digital display Manual cutting gap adjustment Cutting length variably adjustable Cutting edge lighting Dedjw I Tu Nepfx Ad Nscg New knives

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Machine is in good conditions. Dcsdsv H Hfnjpfx Ad Nsg

Condition: new, Technical Data for the Shelf Panel: Shelving System: Meta Type: Clip Scope of delivery includes: 01x Shelf panel, used Dcjdpjy H Hkpsfx Ad Nsg Shelf designation: MS150-III Material finish: Sendzimir galvanized Dimensions: 1,000 x 500 x 40 mm Weight: 3.41 kg/piece Maximum load per shelf: 150 kg, with evenly distributed load. 04x Shelf support brackets 40 mm, used, galvanized silver, suitable for steel shelves with 40 mm upturned edge Finish: Zn blue + therm 4h, galvanized Color: Silver Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested individually depending on the delivery location and scope of delivery.

Condition: used, more available, ESD tables and side tables, as well as equipment such as oscilloscopes, isolation transformers, etc. Dsdpfxjy I Uw Ts Ad Necg Price for one lab table with superstructure and one mobile pedestal

Condition: good (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 7106, working width: 3,000 mm, sheet thickness (max.): 4 mm, Equipment: type plate available, hydraulic swing beam shear HERA TS 3000x4 with feed unit Year of manufacture: 2002 Dcjdpfxsx Td Ais Ad Njg

Condition: good (used), Year of construction: 1998, Chipper with horizontal feed and conveyor belt in standby mode. Slow-running and therefore very quiet. Max width: 300 mm. Max height: approx. 30 mm. Motor: 18.5 kW, 115 rpm. Ideal for use next to a panel saw for long strips. Dcodpfegmn Amjx Ad Nog

Condition: excellent (used), Year of construction: 2001, spindle bore: 20 mm, Machine in perfect condition. Can be inspected during production any time Djdpfeu Ivw Tsx Ad Nscg

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester Dcjdpoywcr Defx Ad Nsg ⸻ INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), CNC machining set for sale: Dedpsw Rd T Iofx Ad Nscg • Original ORION SK40-2/20-70 tool holder conforming to DIN 69871 AD – ventilated version with through-spindle cooling. • ER collet chuck with nut – stable and precise tool clamping. • HSS/HSCo twist drill 14 mm – robust tool for steel and alloys. • Set in good technical condition, ready for operation. Professional equipment – high rigidity, accuracy, and efficient cooling during machining.

Condition: used, Technical data for the shelf panel: Shelving system: Meta Type: Clip Included in delivery: 01x Shelf panel, used Panel designation: MS150-III Djdpfxjyk T E Ts Ad Nscg Material finish: Sendzimir galvanized Dimensions: 1,000 x 600 x 40 mm Weight: 3.93 kg|pc. Max. load per shelf panel: 150 kg with evenly distributed load Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs can be queried separately with us depending on the delivery location and the scope of delivery.

Condition: new, Technical data for shelf panel: Shelving system: Meta Type: Clip Scope of delivery: 01x shelf panel, used Panel designation: MS150-III Material colour: Sendzimir galvanized Dimensions: 1,300 x 600 x 40 mm Weight: 5.11 kg/unit Maximum load per shelf panel: 150 kg with evenly distributed load Dedpfjyk R Rmex Ad Nscg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply. These can be requested from us individually, depending on delivery location and scope.

Condition: used, Year of construction: 1995, sheet width 3000 mm plate thickness 4 mm work height max. 900 mm 450 mm total power requirement 5,5 kW weight of the machine ca. 4800 kg dimensions of the machine ca. 4250 x 1500 x 1850 mm Equipment: - electric bending angle adjustment - electric upper beam adjustment - foot switch Djdpfx Adoyk Diis Nscg - operating instructions

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 1000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backstop, 1000 mm - Motorized upper crossbar adjustment - Motorized lower crossbar adjustment - Side protection Dcodpfxoyk Dics Ad Nog - Foot switch - Operating instructions

Condition: used, functionality: fully functional, control type: CNC control, degree of automation: automatic, working width: 3,000 mm, sheet thickness (max.): 4 mm, Sheet Metal Folding Machine 3000 mm / 4 mm – With Electric Adjustments Dcjdpfx Ajyly Rrsd Neg Heavy-duty and reliable sheet metal folding machine for industrial use. Technical Specifications: Sheet width: 3000 mm Max. sheet thickness: 4 mm Max. working height: 900 mm Bending beam opening: 450 mm Total power requirement: 5.5 kW Machine weight: approx. 4,800 kg Machine dimensions (L x W x H): approx. 4250 x 1500 x 1850 mm Equipment: Electric bending angle adjustment Electric upper beam adjustment Foot switch Operating instructions included The machine is ideal for metal workshops and industrial production. Its robust construction and large working width ensure efficient and precise operation

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 230 h, load capacity: 408 kg, lifting height: 6,100 mm, platform length: 2,320 mm, platform width: 840 mm, overall weight: 1,594 kg, empty load weight: 1,594 kg, construction height: 1,970 mm, fuel type: electric, tire condition: 95 %, drive condition: 90 %, color: orange, SKYJACK SJ III 3220 scissor lift for sale in excellent condition personnel lift, work platform, aerial platform manufacturer: Skyjack type: SJIII 3220 year of manufacture: 2015 load capacity: 408kg Working height: 8.1 m Raised platform height: 6.1.m Total width: 0.84 m Dcedpjwb E Txsfx Ad Neg Total length: 2.32 m + 0.8 meters Gross weight: 1594 kg NEW non-marking tires hours: 230 good condition TROJAN MOTIVE batteries. built-in battery charger 220v socket If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 1961, Manufacturer: WMW NILES lathe DLZ 630 Condition: used Turning diameter over bed: 630 mm Dcedodwfdfjpfx Ad Nog Feed: quer: 0,018-1,25 mm/U Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Weight of the machine ca.: 4,2 t Transport dimensions lxwxh: 4,5×1,35×1,5 m Turning diameter over slide: 340 mm If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm throat 300 mm stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm Dcodpfx Adeuiz I De Nog Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: good (used), Gear cutter, module cutter, hob cutter, tooth form cutter, module milling head, end mill cutter, roller cutter, milling cutter, hob cutter, splined shaft hob cutter -1x milling cutter from: 650.054.06 A SPAN. < 5 ° EV 4 CO -Diameter: 22 mm -Weight: 0.6 kg Dodpfx Adsb A Srio Nscg

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm Dedpfxou Nfm Ts Ad Nocg total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *

Condition: used, 7 pieces Bending tools for bending machine Dcodob D Ry Rspfx Ad Njg Length 3000 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 3,100 mm, bending force (max.): 110 t, TECHNICAL DETAILS Press force: 110 t Bending length: 3,100 mm MACHINE DETAILS Machine weight: 10,000 kg EQUIPMENT - CNC Delem control - Side safety doors - Two-hand foot pedal - 2 support arms - Upper and lower tools - Hydraulic tool clamping - Crowning system Djdpoww E Risfx Ad Nscg