Used Herkules Passend Für Bo 238 K for sale (38,438)

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Crjdpfjglaq Iex Adroh Total weight of all rollers: 57 kg. Good condition.

Condition: new, functionality: fully functional, Aerial work platform, work basket with platform for forklift (like new) Width: 870mm Crjdpezyu Tiefx Adroh Depth: 870mm Guardrail height: 1020mm / 1500mm / Total height of forklift protection mast: 2330mm Includes extension: 480mm with side access With forklift mounting distance: min: 550mm – max: 940mm Forklift tine receiver: width max. 190mm x height 90mm Available in stock.

Condition: used, Year of construction: 2016, Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data - Manufacturer: Scaligera - Model: ULISSE 4000 - Year of manufacture: 2016 - Machine type: sleeve labeler with steam shrink tunnel - Output: up to 4,000 cans/h - Containers: sleek and standard cans - Machine direction: left to right - Power supply: 400 V, 3-phase, 50 Hz - Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) - Max. current: sleever 7 A, steam tunnel 10 A - Compressed air (sleever): 6 bar - Steam supply (tunnel): 6 bar, up to 200 kg/h - Weight: sleever approx. 850 kg, steam tunnel approx. 350 kg - CE mark on both machine plates Equipment - Scaligera ULISSE 4000 sleeve applicator with infeed screw and guarded, windowed housing - Scaligera TVP2SE steam shrink tunnel (2016) with two inspection windows and pressure gauges - Electrical control cabinet with push-button operation and signal tower Condition Used. The machine was in production until early September 2023 and is now dismantled, so it cannot be shown in operation. Sold without warranty. Availability Immediately. Location: Belgium. Crjdoz H N Hhepfx Adrjh

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 70012002 0406, fuel type: gasoline, Herkules KM 1200 H sweeping machine with a 120 cm working width, sweeping brush, and snowplow. Suitable for cleaning courtyards and paths, as well as for winter maintenance. TECHNICAL DATA Manufacturer: Herkules / telsnig Model: KM 1200 H Year of manufacture: 2011 Engine: Honda GXV 160 Fuel: Gasoline Working width: 1,200 mm No operating hour meter available. SCOPE OF DELIVERY Sweeping machine with sweeping brush and snowplow, width 120 cm. CONDITION Used machine in very good condition, according to available information. The engine runs smoothly and starts well, even when cold. Tires are in good condition; signs of wear can be seen in the photos. The carburetor was cleaned several years ago. Further maintenance work or oil changes are not documented; current maintenance is not guaranteed. LOCATION AND PICKUP 74376 Gemmrigheim, Germany. Inspection and pickup by arrangement. Csdpjz Hcrdefx Adrjrh Price: 2,875 EUR net, negotiable, plus statutory value-added tax. Reference: RQ427302

Condition: used, Year of construction: 2007, Overview Cjdpfx Aoz Hbp Ijdrorh This Logopak LOGOMATIC 920 II PF, built in 2007, is a print-and-apply labelling system for pallets. It prints labels by direct thermal or thermal transfer and applies them with a telescopic tamp applicator onto pallets standing still beside the conveyor. The machine is still installed at the end of a wine bottling and palletising line and can be inspected on site. Technical data - Manufacturer: Logopak - Model: LOGOMATIC 920 II PF - Year of manufacture: 2007 - Machine type: print-and-apply pallet labeller - Output: 4 labels/min - Print methods: direct thermal and thermal transfer - Label size: 148 x 210 mm (W x H), 3 mm gap - Label roll: max. diameter 400 mm, core diameter 76 mm (150 mm) - Mounting: vertical, print head at the bottom - Control: Logopak POWER LEAP II - Interfaces: W&T COM server, RS 232 - Power supply: 88 - 240 V AC, 50/60 Hz; 7 A at 115 V, 3.5 A at 230 V - Compressed air: required (valve block and vacuum generator) - Overall dimensions (L x W x H): 1,530 x 1,000 x 2,910 mm Equipment - Labelling unit in a closed cabinet with two windowed doors - Label unwinder, printer and telescopic tamp applicator - Control box on the machine frame with display terminal, start/stop, emergency stop, auto/bypass key switch and main switch - Bypass function and three-colour signal tower - Floor frame with foot plates for anchoring beside the pallet conveyor - CE marked; operating manual (Dutch) available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2015, functionality: fully functional, CNC Pegas Gonda Hercules 300x300 fully automatic bandsaw. Cedpfx Ajz Eacksdrjrh

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, turning length: 5,000 mm, turning diameter: 1,550 mm, Turning diameter: 1,550 mm Distance between centers: 7,000 mm Faceplate: 0.63 to 63 rpm Max. workpiece weight: 50 t Machine weight: approx. 80 t Csdpfx Aox Sdqqsdrorh

Condition: good (used), Year of construction: 2007, CPU boards for injection molding machines Arburg Multronica Boards manufactured approx. 2007 Cjdjzl Tv Tepfx Adrsrh Available: 3 units

Condition: used, Fensterfalztasche - Altarfalztasche - Gateway Buckle Stahl für K/T 94erwith deflector with control box Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Csdpfx Aoh Ax Rmodrsrh On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1997, functionality: fully functional, 4-AXIS CNC MACHINE FROM A PART-TIME JOINERY, VERY GOOD CONDITION Workpiece dimensions max.: Length 3,000 mm Credpfoz H Na Iox Adroh Width 1,050 mm Thickness 60 mm with standard clamps 120 mm with clamping templates (customer-supplied) 2 clamping stations for machining 2 identical workpieces, resulting in halved changeover times 6 clamping consoles with tubeless vacuum guidance 12 vacuum suction cups Machine zero point at the front left Chip conveyor belt Main spindle 7.5 kW, HSK 63 F S1 incl. stepless speed control 1,500 - 18,000 RPM C-axis for main spindle Tool changer magazine, 12-position, mounted on the support and moving with the X-axis Drilling head, 17 spindles, vertical, 7,500 RPM Spindle spacing 32 mm Drilling head, horizontal, 4 spindles Control system: ----- HOMATIC NC 83 Operating system OS-9 with WINDOWS interface WOODWOP 4.5 Connection values: 380 V / 50 Hz Control voltage: 220 V 50 Hz Additional accessories: ----- Anti-slip mats in front of the machine Adapter unit for saw with 2 outlets Maintenance performed: - Main spindle completely overhauled in 2019, since then max. 100 hours of use - X-axis bearings completely new - Water hoses partially replaced - New vacuum pump Becker - Cooling unit for main spindle new

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters Crjdpfx Adszizr Rersh - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 Credpfxjy Tptmj Adrsh For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Self-weight: 6.6 kg Very good condition, from stock

Condition: used, Year of construction: 2017, Overview This SACMI KUBE 60 is a rotary self-adhesive labelling machine built in Italy in 2017. It carries six self-adhesive labelling stations and eighteen servo-driven bottle plates, and reaches a maximum output of 12,000 bottles per hour in its current configuration. The machine labels 750 ml glass bottles in a sparkling wine line, where it currently runs at about 5,000 bottles per hour. A LINX SL301 laser marking system is integrated for coding. Cjdpfx Aez Durwedrjrh Technical data - Manufacturer: SACMI - Model: KUBE 60 - Year of manufacture: 2017 - Machine type: rotary self-adhesive labeller - Maximum output: 12,000 bottles/h - Current production speed: about 5,000 bottles/h - Containers: glass bottles, 750 ml - Self-adhesive labelling stations: 6 - Bottle plates: 18, servo-driven - Electrical supply: 400 V, 3 phases + N + PE, 50 Hz - Rated current: 13 A Equipment - Six self-adhesive labelling stations with their own operator displays - Main touch-screen operator panel - LINX SL301 laser marking system for coding Condition The machine is still installed and in production and can be inspected by arrangement. Dismantling and loading are not included. Availability Available from 29 January 2027.

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine Credpjz Dimpefx Adroh - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Cedpfxszr N E De Adrsrh Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: used, Year of construction: 1986, Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 79erYear 1985 Online-Video-Inspection by Skype-Video Codpfx Adeh Ax Aqsrorh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1989, Fensterfalztasche - Altarfalztasche - Gateway Buckle MBO für K/T 72erYear 1998 Online-Video-Inspection by Skype-Video Crsdpfx Aeh Ax A Usdrjh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Altarfalztasche MBO 76 Online-Video-Inspection by Skype-Video Credoh Ax I Sepfx Adrjh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Codjub Umqjpfx Adrjrh Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Year of construction: 2015, condition: ready for operation (used), controller manufacturer: SIEMENS, overall weight: 1,420 kg, total width: 1,000 mm, total height: 1,900 mm, product length (max.): 1,500 mm, Bandsaw machine manufactured in 2015. This Pegas HERKULES X-CNC 300x300 features a maximum cutting diameter of Ø 300 mm and is equipped with a powerful 6.5 kW motor. The machine dimensions are 1500 × 1000 × 1900 mm, and it weighs approximately 1,420 kg. If you are looking to get high-quality cutting capabilities, consider the Pegas HERKULES X-CNC 300x300 machine we have for sale. Contact us for further details. • Maximum cutting diameter: Ø 300 mm • Saw blade dimensions: 4500 × 34 × 1.1 mm Credoz Eqbqepfx Adroh • Power: 6.5 kW • Included standard components: all motors, electrical cabinet Additional equipment • Chip conveyor • Bar feeder

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3CR00640, Leased Equipment – Return Inventory Model Serial No Lease End Date Line Description Final Meter Reading imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Color A3 4,211,723 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Color A4 1,483,205 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Mono A3 1,157 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Mono A4 1,992,235 Canon imagePRESS C10010 VP 1 x Color Digital Printing System with Plockmatic BLM50 Booklet Finishing System Professional production printing solution for high-quality color and monochrome productions – including PRISMAsync workflow, high-performance paper feeder, high-capacity stacker, and extensive inline booklet finishing. System Overview Quantity 1 System Model Canon imagePRESS C10010 VP Printing Speed up to 100 pages/minute DIN A4 Printing Technology Electrographic Color Digital Printing Controller / Workflow Canon PRISMAsync Paper Feeder POD Deck-D1 Scanner Duplex Color Image Reader Unit-M2 Production Output High Capacity Stacker-H1 Booklet System Plockmatic BLM50 / BLM35 Booklet Maker with Upgrade Finishing Stapling, Folding, Front Trimming, Square Fold, Cover Feed, Rotate/Crease/Trim, Belt Stacker Crodpfoz I El Nex Adroh Color Management i1 Process Control v5.3 Printing Languages PCL6, IPDS, PDF for IPDS Equipment per System Canon imagePRESS C10010 VP Printing System • imagePRESS C10010 Series incl. Marking Engine • Fixing Station and Power Supply Unit • Operating Panel-A5 incl. Operating Panel Foot-D1 • Operator Attention Light-D1 • Canon Toner T02 – BK, C, M and Y • CABLE MAINS, C13 EUR PRISMAsync Print Server & Licenses • PRISMAsync for imagePRESS C10010VP-A1 • PRISMAsync Options Bundle C10010VP-A1 • PCL6 TP-J1 • IPDS-J1 and PDF for IPDS-J1 • PRISMAsync Remote Match imagePRESS C10010VP • imagePRESS C10010 License and Resale License Paper Feeder, Scanner & Production Output • POD Deck-D1 – High-performance Paper Feeder • Duplex Color Image Reader Unit-M2 incl. Reader Attachment Kit-B1 • High Capacity Stacker-H1 • DFD Interface Kit-A1 • Canon DFD Paper Path Kit 860-B1 Plockmatic Booklet Finishing System • Plockmatic BLM 35/50 • Plockmatic BLM 50 • BLM35 Booklet Maker • BLM50 Upgrade Kit • PLM Staple for BLM50 • FTR50 Trimmer Module – Front Trimming • SQF50 Square Fold Module – Spine/Square Fold Function • CF50 Cover Feeder Module – Separate Cover Feeder • RCT50 Rotate Crease Trim – Rotate, Crease, and Trim • BST 4000-1 Belt Stacker Module – Belt Stacker for finished booklets Color Management • i1 Process Control v5.3 for professional color calibration and reproducible production quality Key Selling Points Complete production line: 100-page/minute color printing system, PRISMAsync, POD Deck, duplex color scanner, high-capacity stacker, and Plockmatic BLM50 booklet system with front trimming, square fold, cover feeder, rotate/crease/trim, and belt stacker. Suitable for: professional brochure, catalog, manual, and booklet production, as well as demanding in-house and digital printing environments. Scope of Supply 1 × Canon imagePRESS C10010 VP with extensive Plockmatic Booklet Finishing System – corresponding to the configuration listed above.

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 3,000 kg, Four-way side loader Condition: Ready for use and fully functional Technical condition: good Description: Little-used spreader for Combilift CB2500 and CB3000, two units available – one for the 135 cm and one for the 175 cm fork carrier. Csdpeu Acuzsfx Adrjrh

Condition: ready for operation (used), Year of construction: 2018, Koenig Herkules HK1100/2650 L-S bowl lift for Kemper SP150 bowls dough scraping unit safety laser scanner max. 980 kg lifting weight lifting height approx. 257cm Codpfx Asv S D Dxsdrorh total height 380cm year of build 2018

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank The scope of delivery includes: 1x Closing lid, Grade II Manufacturer: SSI Schäfer Lid type: VD-14/6-A Suitable for SSI Schäfer stacking box 14/6-A Material color: green Material: Steel, painted Dimensions: approx. 520x320x35 mm (LxWxH) Weight: approx. 2.481 kg 4 draw latches Cedpshr I I Nsfx Adrjrh General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope. Our services at a glance: (Prices upon request) Assembly, installation Our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Year of construction: 2015, Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Technical data - Capacity: Codpfx Asy Hkghodrjrh - approx. 1,200 bottles/hour (standard labels) - up to approx. 1,500 – 1,800 bottles/hour (small labels) - approx. 1,100 bottles/hour (front and back from one roll) - Formats: Diameter 50 – 100 mm, conical bottle shapes - Application: Bottle labelling (beverage, wine, spirits) - Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll - Label positions: Front, back - Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table