Used Hermle C 250 U for sale (78,321)

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant. Ndsdpfxszghngj Aa Rsa

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). Nodpfjzt Nywox Aa Rsda With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Ndodpfx Aezv Syfja Rsa Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: ready for operation (used), Year of construction: 2020, Make: HERMLE Type of machine: C 42 U Year of manufacture: 2020 Nodezv S Rqepfx Aa Rsda Control system: Heidenhain TNC 640 Machine's weight: 13.000 kg Tool holder: HSK-A63* x-travel: 800 mm y-travel: 800 mm z-travel: 550 mm Speed range: 18.000 U/min max. Table load: 850 kg Table dimensions: 800 × 630 mm Number of tools in the magazine: 92 Pl. Internal coolant supply: 40 bar

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed length X-axis: 35,000 mm, feed length Y-axis: 35,000 mm, feed length Z-axis: 35,000 mm, controller manufacturer: HeidenHain, controller model: iTNC 530, total height: 2,800 mm, total length: 3,500 mm, total width: 3,000 mm, overall weight: 6,600 kg, spindle speed (max.): 18,000 rpm, X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Ø: 280mm Feed rate X-Axis: 35000mm/min Feed rate Y-Axis: 35000mm/min Feed rate Z-Axis: 35000mm/min Feed rate A-Axis: 10 degrees/min Feed rate B-Axis: 15 degrees/min Spindle Taper: 40ISO/Bt/Mk Nsdpezvd Ubjfx Aa Rjda Power on spindle: 15kW Speeds / ranges: 18000 rpm ATC / revolver: 30 Number of controlled axes: 5 Chip conveyor: No Length: 3500mm Width: 3000mm Height: 2800mm Weight: 6600kg

Condition: excellent (used), Year of construction: 2015, operating hours: 22,387 h, Manufacturer: Hermle | Type: C 400 U | Serial number: 23589 | Year of manufacture: 2015 | Operating hours: approx. 8939 | Control system: Heidenhain TNC 530; Travel ranges (X/Y/Z): 850 / 700 / 500 mm; Swivel/rotating table: Ø 630 mm, integrated, C- and B-axis. Nedpfjzq Dkxsx Aa Roda Tool magazine: 38 positions; Spindle speed: up to 18,000 rpm; Drive power: approx. 20 kW; Machine weight: approx. 8,000 kg; Cooling system: Knoll 850 K-1 with high-pressure unit; Coolant system; Central filter with return conveyor and heat exchanger; NC swivel rotary table; The operating hours refer to spindle operation. | Dimensions: approx. 4000 mm x 3400 mm x 2700 mm (W x H x L) | Approx. 10,500 kg | The specified dimensions are approximate values. All other information is provided without guarantee. | Grey | Steel Category: Machines and technical equipment

Condition: used, Year of construction: 2011, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. Njdszczhaspfx Aa Rjda The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Ndjdpozaf Huefx Aa Roa Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm Ndsdpfxox Dndce Aa Rja y-travel 600 mm z-travel 500 mm

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg Nsdpfszd E Tbex Aa Reda max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 6,5 x 4,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 U Dynamic - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change - OPTIONALLY available with a pallet changer (extra cost)

Condition: used, Year of construction: 2009, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm Njdpfjyy A N Uox Aa Rjda control HEIDENHAIN - TNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 120 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC (80 bar), NC swivel rotary table, 120-way tool changer & pallet changer. The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 20 | C20 | C-20 | C20U

Condition: used, Year of construction: 2012, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Siemens 840 D rotary table 800 mm c-axis 0.001º ( ±360º) 0 B-axis (table) º mm number of spindle speeds 18.000 U/min/rpm tool taper HSK 63 Tools changer 38 fach/tools Ndedpfeyxy E Rsx Aa Rja Internal cooling system 80 bar total power requirement 43 kVA weight of the machine ca. 10,6 t Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel

Year of construction: 2002, condition: excellent (used), HERMLE C 800 U CNC machining center Accessories incl.: among others: 3D touch probe, tool holder set, various clamping devices, chip tray, hydr. aggregate, double back-up Ndjdpfx Aajmqk E Te Roa Technical Data speed: 0- 18`000 rpm spindle nose: HSK-A63 Feeding speed: 1-35 m/min feed force: 8000 N X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm dimensions of the machine: 2700 x 2210 x 2930 mm Weight: 8500 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2015, C 22 U + IH 30 handling system + ZM 192 additional magazine Machine parameters: Travel in X, Y, Z axes: 450, 600, 330 mm Max. spindle speed: 18000 HSK-A63 rpm Ndjdpfjy Rgfzex Aa Rja Description: The machine is in good technical condition, test operation is possible by prior arrangement. Equipped with Hardware KinematicOpt, centre cooling 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Original price was approx. €570,000. Comprehensive specification of supplied components and options available – will be provided upon request.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Ndodpfx Asxbz A Hoa Rea Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Ndodpfxoyxn Dne Aa Rea

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Nedpfxstmtxme Aa Rsda Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Nedpfxey U Nqno Aa Rjda

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. Ndodpfezmamuex Aa Rja The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009702, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances in accordance with DIN 1539! 3 heavy-duty pull-out shelves included, each with a load capacity of 123 kg, full extension! - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Volume: 1500 liters - Tmax: 250°C - Controller: JUMO Imago 500 - Approved amount of solvent at Tmax: 250 g / 46 g - Exhaust air volume flow: 6 m³/min - Additional equipment: 3 pull-out grid shelves, each with a load capacity of 123 kg 1 pull-out chip tray at the bottom, included Pass-through for e.g. thermocouples - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection is possible in our warehouse by appointment. We offer new and used industrial ovens. Please contact us! Ndjdpozivl Sofx Aa Roa Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009701, functionality: fully functional, immediately available, very good condition, 12 months warranty With safety system for solvent-containing substances according to DIN 1539 -Internal dimensions w x d x h 1000 x 1000 x 1500 mm -External dimensions w x d x h 1765 x 1425 x 2615 mm -Capacity 1500 liters -Tmax 250°C -Controller JUMO Imago 500 Nsdpfx Aajzivl Eo Reda -Approved amount of solvent at Tmax 250 g: 46 g -Exhaust air flow rate: 6 m³/min -Optional equipment: 1 feed-through, e.g. for thermocouples Entry markings -Matching charging carts and trays available on request! -Connected load 26 kW -Net weight 1250 kg -Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Inspection in our warehouse is possible by appointment. We offer new and used industrial ovens. Please contact us! Oven, industrial oven, drying oven, firing oven, heating oven, heating cabinet, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, curing oven, convection drying cabinet, solvent oven, chamber dryer, paint drying oven.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009703, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances according to DIN 1539! 3 heavy-duty pull-out shelves, each with a load capacity of 123 kg, full extension! -Internal dimensions w x d x h: 1000 x 1000 x 1500 mm Nsdpfx Aaozivlro Reda -External dimensions w x d x h: 1765 x 1425 x 2615 mm -Volume: 1500 liters -Tmax 250°C -Controller: JUMO Imago 500 -Approved solvent quantity at Tmax 250°C: 46 g -Exhaust air volume flow: 6 m³/min -Additional equipment: 3 pull-out grid shelves, heavy-duty, each with a maximum load capacity of 123 kg 1 pull-out chip tray at the bottom, included 1 feedthrough, e.g., for thermocouples -Connection power: 26 kW -Net weight: 1250 kg -Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection can be arranged at our warehouse. We carry new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, sintering oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: used, Year of construction: 2004, x-travel 650 mm y-travel 600 mm z-travel 500 mm Nsdpexmagzefx Aa Reda control Sinumerik 840 D pl Siemens turning speed range - main spindle 20 - 28.000 min/-1 power capacity - main spindel 23 / 18 kW max. Torque 79 Nm tool taper HSK-A63 table surface area Ø 630 mm Swivel range A: +30° / -115 ° rotatable C: 360 ° max. table load 500 kg max. workpiece sizes Ø 630 x 313 mm table speed A:25 / C:65 min/-1 number of toolpositions 117 pos. max. tool diameter 90 (125) mm max. tool length 300 mm rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8,5 kN total power requirement 43 kVA weight of the machine ca. 10,5 t dimensions of the machine ca. 6,5 x 4,5 x 3,0 m 5 Axis CNC - Machining Center Universal HERMLE - C 30 UP Dynamic - palletchanger - Tool-Magazine 117 pos. - ca. 9.000h Spindle-hrs. after change - OPTIONALLY available without pallet changer

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing Nodpsyzyttofx Aa Reda - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: not inspected (used), diameter / mm Cutting (quantity) / weight / kg Spindeltyp: 195.6/S/48-7.7/20-1D/60HSK-A63 Ident-No.: 195.6/x000917B2 Milling spindle is sold as untested ! Nedpfxoxn Aqfj Aa Rsda