Used Hoffmann Rw/Nc160 for sale (962)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, center height: 160 mm, From surplus stock: Like-new NC axis HOFFMANN RW/NC160, complete with coupling and servo motor, for use as a 4th axis. Laodozvd Rvjpfx Ahash

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily realized thanks to the rotating drilling unit. Lajdpoyfta Tsfx Ahaoh Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowelling on two levels without adjustment The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then carried out pneumatically from the front Cross adjustment approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Chassis Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is very rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (L x W x H), weight 310kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter Lajdozvn Hbjpfx Ahajh with stops.

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 180.1001, functionality: fully functional, input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, We are offering this very well-maintained Hoffmann + Kuhnheinrich 180 four-sided planer, year of manufacture 1997. Manufacturer: Hoffmann + Kuhnheinrich GmbH Machine type: 180 Lsdjy D Nc Nepfx Ahaeah Year of manufacture: 1997 Machine no.: 180.1001 Voltage: 380 V Rated current: 32 A Frequency: 50 Hz If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Manufacturer: Becomix. Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. Laodpfxoyx Ibge Ahajh -Vacuum pump. - PLC control integrated into a mobile table. -Mixing vessel full vacuum to 1 bar, double jacket 4 bar.

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, Ljdpfx Aoz T Ahmehajah - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018

Year of construction: 2017, condition: used, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system. Weight approx: 1700 kg Ljdpov Uw U Njfx Ahaeah Dimensions W x D x H: 1900 x 1200 x 2400 mm Cutting disc diameter: Max. 200 mm Drive power grinding motor: 4,0 kW Workpiece length without loader magazines: 3 - 450 mm Workpiece diameter without loading magazine: 3 - 32 mm Workpiece length with loader magazine: 1-350 mm Workpiece diameter with loading magazine: from 3 - 20 mm

Year of construction: 2015, condition: ready for operation (used), A variety of semi-automatic and automatic window production machines is available. 1) Selecta BSS, year of construction: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of construction: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic slot milling machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of construction: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Wood and aluminum punching machine Batimet FOM, year of construction: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of construction: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum miter saw Hoffmann MS-35, year of construction: 2003, power: 2x18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. An on-site inspection is possible. Individual sale possible. Lodpfoucw Tiox Ahajah

Condition: used, used good condition low mileage cleaned functionality tested Manufacturer: Hoffmann Model: MU X-line Stop for stub tenon Ljdpjz Np Ixsfx Ahasah Stop for miter cut New price approx.: 1900.00 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: used, maximum load weight: 5,500 kg, overall weight: 7,500 kg, axle configuration: 2 axles, first registration: 09/1994, next inspection (TÜV): 02/2026, loading space length: 4,660 mm, loading space width: 1,890 mm, total length: 6,940 mm, total width: 2,500 mm, Hoffmann low loader, type LTD 11.T, de-rated, in standard version with loading ramps, air brake system, front toolbox, TÜV valid until 02/2026, in good and ready-to-use condition. Ljdpfx Aoxq Uf Hjhaeah

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Tool24 PickOne Goods dispensing system with an innovative drum system to ensure secure individual retrieval of each item. Very fast goods retrieval due to short access times, a self-opening compartment, and an optical signal at the correct retrieval compartment. The drum of the Tool24 PickOne is available with up to 4 different compartment sizes as a standard configuration and, with a load-bearing capacity of over 1000 kg, is specifically designed for industrial use. Flexible mounting of a touchscreen thanks to perforated panels installed on both sides. Lajdpfx Ahozuwvcsajh The master system can be expanded as needed with additional expansion systems and combined with all Tool24 hardware variants. The Tool24 PickOne – master system is a state-of-the-art goods dispensing system that was specifically developed for industrial use. It combines the functions of a tool magazine with the security and efficiency of an automated tool cabinet.

Condition: excellent (used), Year of construction: 2020, liter capacity 240/300 l feed pressure siehe Plan bar coolant capacity 2900 l Ljdpswgizwsfx Ahasah Filter capacity 6 m² total power requirement 45 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 4,3 x 2,6 x 2,2 m

Condition: used, Year of construction: 2009, Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure, Laodowd Ha Sepfx Ahaeh Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel Automatic fire extinguishing system Kraft & Bauer FB 703, Length positioning freely programmable, Control system Siemens Simatic HMI, Preparation for connection to central coolant system. Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3-32mm Workpiece length with loading magazine: 3-350mm Workpiece length without loading magazines: 1-450mm Spindle speed grinding spindle: 2000 rpm, mass: approx. 1,700 kg weight: approx. 1,700 kg Dimensions L x W x H: 1900 x 1200 x 2400 mm colour: Gray

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Max. axle length wheel set:26450mm Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Number of slides: 2 Length: 3500mm Width: 2000mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ledpfx Ahey Uvgceaeah

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm Lodpouxc Dhjfx Ahasah workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg Lasdouxczajpfx Ahaoh colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Laedpfx Aox T Ah Dohaeh Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Pneumatic pressers Adjustment stops 380V Lodpfxexzpwlj Ahajah

Year of construction: 2009, condition: used, KSS/filter/cooling systems Emulsion Lsdpfxjw Tbnus Ahasah *

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Lasdsvyurcjpfx Ahash Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: used, empty load weight: 2,500 kg, maximum load weight: 7,500 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 10/2001, loading space length: 4,550 mm, loading space width: 2,200 mm, loading space height: 500 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem, leaf springs, lashing eyes, U-protection, front support, rear support, swing flaps Construction: 3-way tipping trailer with loading ramps, steel side walls swinging and foldable, GFA axles, drum brakes! Loading ramps available for an additional charge of €1,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Lodpfx Asmu Rfrehaoah - .

Condition: good (used), Item description: Hofmann 4th axis RWNC - 160 from DMG DMU50T ----- Laodpfx Aezzkldshaeh Item condition: The item comes from a company liquidation. Condition: used. Functional video available. Internal number: 26,564

Condition: good (used), functionality: fully functional, ALLMATIC NC high-pressure chuck - Type NC 160 - incl. 2 sets of jaws - incl. angular bracket for horizontal machining Laedpozlytrofx Ahash - incl. base plate 350 x 350 mm

Condition: good (used), Year of construction: 2010, 1 x Spako Electric Jacketed Cooking Vessel Year: 2010 Lajdpfx Aoz Dw Eaehajh Model: DW 150 RW Capacity: 150litres Suitable for sauces, soups, fillings, preserves, ready meals and other cooked food products.

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Lasdpfxj Adtqls Ahaoh