Used Hokutech Hoku 119-90 for sale (11,538)

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage, compression-enhancing, mobile piston compressor The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, comes standard with a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 674 l/min, delivery capacity 505 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V Hnodovl Ev Ajpfx Akrsu Ex works, from the Seevetal location, without transport, as inspected, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, delivery capacity at 6 bar of approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, Hedpfswgcb Dex Akrjnu 2 cylinders with 2 stages, speed of 920 rpm, 400 Volt, 50 Hz, 4 kW motor with Condor pressure switch and pressure gauge, including pre-filter, desiccant dryer (230 Volt), automatic tank drain (230 V), and oil/water separator, bolted onto a safety base pallet with rubber vibration dampers, immediately available, Ex Works, from the Seevetal location, excluding transport, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Robust compressors for professional use with V-belt drive and a high-performance 2-cylinder unit made of cast iron. The universal model with V-belt drive and high-quality components, specifically designed for tradespeople, for use in environments where the quality of compressed air, as well as durability and efficiency, are essential. Long service life Hsdevl Euxspfx Akronu thanks to high-performance units with low speeds, safe transport and excellent stability thanks to large wheels with a parking brake, optimal cooling through a large fan wheel, an aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, improved efficiency through optimized units, standard equipment includes a Condor pressure switch, pressure gauge, pressure regulator with water separator and quick-release coupling, motor with overload protection. Technical data: Intake capacity 500 l/min, delivery capacity 375 l/min, maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, motor power 3 kW / 400 V Ex works, from the Seevetal location, excluding transport, as inspected, subject to prior sale.

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Hnodpjhk Dfkofx Akrou Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Power 15 KW Hodpsvwfhcjfx Akrsnu Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 rpm.Number of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Hjdpeyw Thvofx Akronu Location: Rieth

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model Hnedpfxsutmw Hs Akrsu H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Hnodpfxjvvi Ans Akreu Storage location: Supplier

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at parallel guide: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm with saw blade at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Dust extraction port D = 120 + 80 mm Angle stop extendable to 3,600 mm, Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable parallel guide adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminum incl. high-precision guide made of hardened and ground steel Sliding carriage locking in any position Saw blade guard with swing-away device Outrigger with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Hnedpfxowz Nbaj Akrou Belt change for speed adjustment from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices according to CE standard as inspected, Ex Works, from location Seevetal, without pre-carriage, freight and training, subject to prior sale.

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos Hedpord Adbefx Akrsnu -Dimension: 75 x 119 mm -Total length: 2505 mm / 3 x 835 mm -Total weight: 63.2 kg

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch Hnsdpfx Aksvyp Avorsu 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Hnedpfsrd Aczjx Akrou -Tool: for press brake, 8 pieces -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 80 x 119 mm -Total length: 835 mm / 1x 400/200/100/50/40/20/15/10 mm each -Total weight: approx. 22 kg

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Hnedpfewd U U Dox Akreu Location:

Condition: new, p 450 ax for panel materials including: Programmable sawblade height adjustment Programmable sawblade pivot adjustment Programmable parallel stop adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP General features of the p 450: Sliding carriage made of anodized aluminum, including high-precision guide made of hardened and ground steel Sliding carriage lock in any position Sawblade guard with pivoting mechanism Extension arm with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45°, and 90° Belt adjustment for speed changes from above (opening in the saw table) Display for the set sawblade speed Electrical system and safety devices in accordance with CE standards Technical specifications Specifications: Sawblade tilt: 0° to 45° Hjdewl N Twopfx Akrenu Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at the parallel stop: 1,100 mm Max. cutting height with a 450 mm sawblade: 90°: 155 mm / 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP 2 extraction nozzles Extendable angle stop to 3,600 mm

Condition: used, Year of construction: 2015, functionality: fully functional, working width: 1,300 mm, total height: 1,780 mm, total length: 9,000 mm, total width: 1,783 mm, LOW USAGE!!! Technological line – equipment characteristics The technological line consists of a set of devices designed for transporting, cleaning, drying, and curing components, including furniture fronts and panels. The TB 2000 and TB 1500 belt conveyors are equipped with belts resistant to abrasion, friction, and solvents. The drive is powered by a geared motor controlled by a frequency inverter, providing a feed rate of 2.2 to 20 m/min. The devices have independent control panels with PLCs. The SMARTCLEAN 33-F brush machine is used to clean components before the painting process. It has a steel, reinforced body, adjustable height of the working units, and a system of brushes, blowers, and deionizing bars. The working width is 1300 mm, and the range of thickness of the processed components is 3–80 mm. The feed rate is 4–20 m/min, and the brush speed is 250–1100 rpm. The machine is equipped with a PLC, a touch panel, and safety systems. The UV-R SP M2 oven is designed for curing UV-cured products and for operation in a line with a working width of 1300 mm. It is equipped with two UV lamps, a cooling system, and an integrated conveyor with a length of 2000 mm. The total length of the oven is 12,000 mm, and the maximum component thickness is 80 mm. Control is via PLC and a touch LCD monitor, with the ability to save programs. The system enables precise adjustment of the radiation power and automatic control of the lamps and cooling. The TT 11000 chain conveyor has steel guides and chrome-plated beams. The length of the device is 11,000 mm, the operating speed is 2.1–20 m/min, and the drive power is 0.75 kW. Control is via a frequency inverter. Hnodsz Ahr Rspfx Akrou The TR 1500 roller conveyor is equipped with driven PVC rollers with a diameter of 66 mm and a pitch of 125 mm. Its length is 1500 mm, and the feed rate is 2.2–20 m/min. The device has a PLC panel, a protective cover, and a photocell at the output. The ECOGEL 64/5 oven is designed for rapid drying of components using laminar flow of hot air. The flow is in the opposite direction to the direction of panel transport. The oven is equipped with a G4 filtration system, a heat exchanger with automatic temperature control, and supply and exhaust fans. The total length is 9000 mm, the working width is 1300 mm, and the maximum component thickness is 80 mm. The installed power is 3.7 kW, and the thermal power is 76,400 kcal/h. Control is via PLC and an LCD monitor. The AQUADRY LA/8 oven is designed for rapid drying of water-based stains and lacquers. It uses high-speed air knives to ensure efficient heat exchange. The process can be further accelerated using infrared lamps. Air recirculation helps to reduce energy consumption. The entire line has integrated control systems, safety features, and solutions that enable the automation of transport, cleaning, drying, and curing processes.

Condition: new, - NEW -DESCRIPTION- Heavy-duty design with high dead weight for maximum running smoothness- Particularly quiet and precise running thanks to torsion-resistant machine housing- Cast flywheels with rubber coating and cleaning brush- 3-roller precision saw blade guide as standard at top and bottom- Large cast iron saw table, swivels from 0° to 15° with ground and polished surface- Large cast iron parallel fence with round bar guide, easily adjustable- Saw blade tension indicator- Precise cutting height adjustment via toothed rack with millimetre scale- Self-braking motorAvailable on request- Version with cutting height up to 1650 mm- Other special versionsTable, motor and switch must be assembled on siteTECHNICAL DATADimensions and weights- Length (product) approx.1050mm- Width/depth (product) approx.720mm- Height (product) approx.2180mm- Weight (net) approx.320kgSuction connection- Suction nozzle diameter2 x 120mmWork table(s)- Work table length 885mm- Work table width 600mm- Work table height 840mm- Work table inclination 0 - 20°Electrical data- Supply voltage400V- Mains frequency50Hz- Output power2.2kWCutting ranges- Cutting height max. 90°400mm- Cutting width max.620mmSaw blade- Saw blade speed(s) 1630m/min- Flywheel diameter 640mm- Saw blade length 4780mm- Saw blade length min. 4770mm- Saw blade length max.4810mm- Saw blade thickness 0.5 - 0.6- Saw blade guide Precision guide top and bottomOrder number: 5152164 Hnodjvwfvajpfx Akrsu

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hedpfox Iwfmex Akronu Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: new, Year of construction: 2025, Hoku BK119-270-10-VKK upright piston compressor with refrigerant dryer, automatic condensate drain, oil-water separator, pre- and fine filters, mounted with rubber vibration dampers on a safety pallet. Universal piston compressors with belt drive and high-quality features. Pressure vessel manufactured according to German AD 2000 regulations. Hnedpjr Ig Ahsfx Akrsu Intake capacity: 650 l/min Effective delivery rate: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor power: 4 kW/400 Volt Air throughput: 650 m³/h Motor power: 4 kW Machine dimensions: 1200 x 800 x 2000 mm Pressure vessel: 270 L Effective delivery volume: 520 L/min Intake volume: 650 L/min Maximum pressure: 10 bar Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 730 kg, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Maximum reach between axis 1 and axis 6: 1,000 mm Repeatability according to ISO 9283: ± 0.03 mm Rotary unit Maximum rotation angle: 350° Safe positions: 0° / ± 90° / 180° Drive unit Maximum rotation speed: 16.8 °/s Maximum travel speed: 0.6 m/s Platform positioning accuracy: ± 10 mm / 1° Drive type: Differential drive Navigation: based on laser scanner data Average surface pressure on the ground: max. 10 N/mm² MACHINE DETAILS Wrist protection class: IP67 Hnsdpfoz Im S Rjx Akrou Arm protection class: IP65 Total system protection class: IP20 Battery capacity: 5.8–8.7 kWh Compressed air tank: 0.75 l Compressed air pressure: 7 bar Power supply: 1 × 230 V / 16 A Dimensions & Weight Dimensions without robot arm (W x H x D): 890 × 1,120 × 1,000 mm Weight: 730 kg Interfaces: WLAN, LAN, Fieldbus Multi-coupling: Compressed air, power supply, 2 × Cat5e, 26 × 1 mm² contacts EQUIPMENT Storage station for 4 tools Tool changing system MPS032 3 laser scanners with 360° monitoring range Height of the personnel-safe scanning plane: 150 mm 4 LED units Storage space for up to 16 audio files

Condition: used, Horizontal tank, insulated, jacketed Brand: Limitech Denmark, Type A3111-1906 Capacity: 1,500 L, 2 identical units Insulated, jacketed, manhole at top Hnsdsx Ttnnopfx Akrsu Stainless steel tank AISI 304 Cooking tank with robust horizontal agitator Special cooking vessel Motor with gearbox 4 kW, jacket rated for 4 bar pressure, max. temperature 100°C

Condition: used, Year of construction: 2012, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,610 kg, Wagner Magnets – Non-ferrous metal separator / Eddy current separator – Type 0429/1-37/90/8 For sale is a used non-ferrous metal separator (eddy current separator) from the manufacturer Wagner Magnets. The machine was used in our recycling and processing plant and serves to separate non-ferrous metals, such as aluminum, from various material streams. Due to the restructuring and upcoming renovation of our recycling plant, the machine is being offered for sale. Technical data: Manufacturer: Wagner Magnets Machine designation: Non-ferrous metal separator Type: 0429/1-37/90/8 Equipment number: 542449 Order number: A 354429 Belt speed: adjustable from 0.5 to 2 m/s Weight of base unit: approx. 1,610 kg Discharge hood included Permissible ambient temperature: -20 °C to +45 °C Control: Type: 0428/1-25 FE Equipment number: 542450 Mains connection: 400 V / 50 Hz Recommended fuse rating: 25 A (slow-blow) Protection class: IP54 Weight: approx. 173 kg Hedpfx Aoz R S D Tokrsnu Drives: Rotor drive: 4 kW Belt drive: 1.5 kW Frequency converter for rotor and belt drive included Magnetic drum: Type: 0421N-30/85-02 A 1AL 15x20 Equipment number: 542449 Motor power: 0.55 kW Discharge hood: Weight: approx. 260 kg Condition and sale: The machine is in used condition and shows corresponding signs of wear and tear due to operation. An on-site inspection is possible after prior appointment. Technical documentation is available. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, TH0400F-1119-00-2, WEISS heavy-duty table Model: TH0400F-1119-00-2 Hnodpfoqct Disx Akrou Type: TH0400FXX- Condition: Used

Condition: good (used), Year of construction: 1988, functionality: fully functional, WE OFFER AN POWERFULL MANDREL TUBE BENDING MACHINE IT CAN WORK UP TO 110mm tubes bending. Hsdpsvk I Thsfx Akrsnu MACHINE CAN BE AS WELL RETROFFITTED TO A CNC CONTROL...WITH ADDITIONAL SEVERAL SERVO MOTORS, TO ROTATE HEAD AND MOVE FORWARD. IT HAS CLAMPING SISTEM AND ALL RAILS SAM AS FULL CNC. Machine comes with a lot of tools accessoriess. Machine just turn on and work, ready for operation, Tools from 60 up to 100mm 6 SETS OF TOOLINGS INCLUDED + MANY ACCESSORIESS AND TOOLS We can organize transport and loading.

Condition: used, Year of construction: 2024, New demonstration machine! Particularly heavy-duty design with high dead weight for maximum smooth running • Exceptionally quiet and precise operation thanks to torsion-resistant machine housing • Large cast parallel fence with round bar guide, easy to move • Cast flywheels with rubber coating and cleaning brush Hnsdpjwggakjfx Akrju • Large grey cast iron saw table, tiltable with ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Door safety switches • Self-braking motor • Two extraction ports Technical data: Table dimensions (L x W x H): 720 x 520 x 860 mm Cutting speed: 1,650 m/min Weight approx. 240 kg Max. cutting height: 350 mm Max. cutting width: 520 mm Max. saw blade length: 4,260 mm Saw blade thickness min./max.: 0.5 / 0.6 mm Precision guides top/bottom Saw table tilt: 0 - 20° Machine dimensions (L x W x H): 870 x 620 x 1970 mm Location in stock:

Condition: used, Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge Hodpfel Ha R Hsx Akrjnu -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg