Used Holzkraft Scm Combined Jointer-Thicknesser for sale (4,081)

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection Hnsdpfehkz E Tsx Agysk The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips Hnjdpfx Aor A Eq Rsgyek High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A Hnodjxw N N Hopfx Agyek With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard Hodpfx Agjxw N Sboyjnk TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Hedsvyuqfepfx Agyonk

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Hnedpfx Agjvwgaaeysk

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Hodsvwflbopfx Agyenk

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Hnedpfx Asvwf Ucjgyek

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Hsdpfx Agevyup Ueyjnk

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Hodpfxevwd U Ie Agyenk

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Hnsdpfsvwfqwox Agyek

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Hnjdpevwf Hrofx Agysk

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Hnsdpfx Agevwga Hoyjk

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Hsdpfovwgc Uex Agyjnk

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Hnjdsvwf Enopfx Agyjk

Condition: new, The work table made of heavily ribbed gray cast iron andguarantee the base made of welded steelTorsion resistance and vibration-free workingHigh quality machine at a real entry-level priceUnique in this performance class:- Format sliding carriage made of anodized aluminum for the highestcutting precision- Cutting plane directly on the saw blade- Swiveling saw blade unit from 90 - 45 °- Table bracket with aluminum crosscut fence and adjustableStop flap for plates and large workpieces- Rip fence with round bar guide and fine adjustment- Powerful engine- Made in EuropeDimensions and weightsWeight (net) approx. 170kgDust extraction connectionExtraction nozzle diameter 120mmExhaust nozzle diameter saw blade protection 60mmTransport width 680 mmWorking area 1600 mm x 2300 mmSpace requirement 2613.5 mm x 2134 mmPlease add the specified dimensions with the space required to obtain the recommended free space for the dimensions take into account maximum travels or usable lengthsElectrical data400 V supply voltageDrive motor 1.8 kWPhase (s) 3 PhNominal operating mode drive motor S6Current type ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat sliding table 1140 mm x 200 mm x 70 mmTable 1024 mm x 224 mm x 900 mmsaw unitCutting width with rip fence 700 mmMax. Cutting height 90 ° 67mmMax. Cutting width to the left of the saw blade 1200 mmMax. Cutting height 45 ° 40mmEdging length 1200 mmSaw blade diameter 250mmSaw blade inclination 90 - 45 °Saw blade speed 3900min¯¹scope of deliverytable extensionAnodized aluminum sliding tableRip fence with round bar guide and fine adjustmentAluminum folding stopEccentricItem No. 5504113 Hsdpfovxr S Rjx Agyonk

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Hnjdpfx Ajvwfmlegysk

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body Hnjdpfxoi Dphte Agyok location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Hodpfx Agjiidnfsyenk Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Hodpfx Agehp Rc Ieyenk Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds Hnsdpfxocnxayo Agyok TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: new, Year of construction: 2026, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Hnedpfx Agocnxa Ssyjk Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Hnjdpfx Aocnwydjgyek Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways Hnedpfocnxa Nex Agyok large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Hnodpfxsff Hdpo Agyek Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]