Used Hommel - Roto Various Ring Gauges for sale (10,697)

Condition: used, 24 used jaw gauges from various manufacturers 15 pieces, double-jaw, from Hommel 1 piece, single-jaw, from Roto 8 with unknown manufacturer, 1 of which is single-jaw Kdedezumgqopfx Ai Rsr Double-sided inspection tool – double-jaw limit gauge, metrology for good and reject sides in separate jaws Price upon request All technical data subject to typing errors/omissions Sale exclusively to countries within the EU.

Condition: used, 13 setting rings Manufacturer unknown: 8.005; 19; 49; 55 Märklen: 16; 40 Hommel: 27; 57; 56; 68; 65 Fer Ter: 38.997; 42.5025 Calibration rings, e.g. 16.000 mm, Ø 20 mm Calibration tools from various manufacturers for inspection – calibration ring used Kdedszumixjpfx Ai Rer Price on request All technical specifications are subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: excellent (used), content of factory set up to produce breakfast cereals such as granola. machinery available includes nut and seed mixing, AC Horn/Telford roasting oven, he could castles, open tumblr, and washer, multi head wire and bagger, Bradman Lake automatic cartoner with automatic loading. Kdsdoyzbktspfx Ai Rsr

Condition: excellent (used), We have the complete contents of a recently closed high care baby food factory for sale. Machinery available includes DC Norris cooking vessels with JetCook facility, 3 x Lagarde retort / autoclaves, Toyo Jidoki tear touch filling machine - twin lane model. Kodoy H Rqaspfx Ai Rjdr

Condition: excellent (used), 1 lot of thread plug gauges – 1,200 Euro Stock number: 45133 Individual sale possible Single prices, see list: M6 15 Euro M8 15 Euro M8x1 15 Euro M10 16 Euro M10x1 17 Euro M12 18 Euro M12x1.5 18 Euro M14 18 Euro M14x1.25 18 Euro Kodpfx Ajywtfuoi Rjdr M14x2 18 Euro M16 18 Euro M16x1.5 18 Euro M20 18 Euro M20 left-hand 18 Euro M20x1.5 18 Euro M22 18 Euro M22x1.5 18 Euro M22x2.5 18 Euro M24 18 Euro M24x1.5 18 Euro M24x2 18 Euro M24x3 18 Euro M27 25 Euro M27x1.5 25 Euro M27x2 25 Euro M28 26 Euro M30 30 Euro M30x1.5 30 Euro M30x2 30 Euro M30x3 30 Euro M32x1.5 30 Euro M33 30 Euro M33x1.5 30 Euro M33x2 30 Euro

Condition: excellent (used), Large selection of nice conveying direct from closed cheese factory. Kodpfx Aoycm D Hei Rjdr

Condition: excellent (used), Thread ring gauges, 100 - 170 mm diameter (Stock no. 45131) 1 lot or sold individually 170 x 2, 6g 130 x 3, 6h 130 x 4, 6h 130 x 4, good condition 130 x 6, good condition 130 x 6, 6h 125 x 3, 6h 125 x 2, 6g 124 x 4, good condition 120 x 4 120 x 3 120 x 3 100 x 6, good condition 100 x 4, 6h 100 x 3, 6h Kjdsyt Eg Iopfx Ai Rodr

Condition: good (used), Total contents of recently closed ice cream factory - the UK's oldest ice cream company Parravani's. Kdsdpfx Asxm S Nhei Rsr

Condition: excellent (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2026, Breadcrumb Crusher Hommel Rotormat 2000 Super "the universal crusher" Stainless steel design High-performance Connection: 400V, 16A CEE plug Kdjdpfx Aey Hwc Asi Rer Dimensions: 690 x 650 x 1550 mm (W x D x H) Used machine, cleaned Comes with warranty We have many other machines in stock!

Condition: excellent (used), Thread ring gauges (45132) Available as a set or individually M33 x 1.5 M42 x 2 M50 x 1.5 M58 x 3 6g M35 x 1.5 M42 x 2 6h M50 x 1.5 6h M60 6h M36 M42 x 3 M52 x 1.5 M60 x 2 M36 6g M42 x 4 M52 x 1.5 6h M62 x 1.5 6g M36 6h M42 x 4 6h M52 x 2 6h M62 x 2 6h M36 x 1.5 M45 M52 x 3 6h M36 x 1.5g M45 6h M55 x 2 M36 x 1.5 6h M45 x 1.5 M56 M36 x 2 6g M45 x 1.5 6g M56 x 2 M36 x 3 M45 x 1.5 6h M56 x 2 6h M36 x 3 6h M45 x 2 M56 x 3 M38 x 1.5 M48 M56 x 3 6h M38 x 1.5 6h M48 x 1.5 6h M56 x 4 M39 x 6h M48 x 3 6h M56 x 4 6h Kedpfx Aioyu N N Ns Rsdr M39 x 1.5 M48 x 4 M58 x 1.5 6g M40 x 1.5 M48 x 6h M58 x 2 M42 x 1.5 M58 x 2 6h M42 x 1.5 6h

Condition: used, Height pliers, parallel pliers, height transfer gauge, height transfer measuring device -Manufacturer: Hommel Werke, height transfer theory Kjdpjfnr Iysfx Ai Rjdr -Type: 4626 DBP -Dimensions: 165/140/H430 mm -Weight: 7.6 kg

Condition: excellent (used), Measuring jaws for gauge blocks Manufacturer: Hommel Type Z 105 Kedpfx Aoyk Dtuei Rjdr (108148) as a set in a wooden case

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Kedpfx Aszt Sb Dsi Rjdr Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 7363126525, Offer 26697 Technical data: - Pressing force: 320 t - Working width: 3050 mm - Distance between the uprights: 2550 mm - Overhang: 460 mm Kodjzvmqfopfx Ai Rjdr - Installation height: approx. 630 mm - Stroke: 365 mm - Motor power: approx. 37 kW - Space requirement: approx. W 5700 x H 3250 x D 2450 mm - Weight: approx. 17500 kg - Including: - Swivel arm – control panel with control system - CYBELEC EVA-10S; Y1 + Y2; X, R, Z - Motorized back gauge - Motorized crowning - Safety light curtain - Electric foot pedal - 4-part universal die, split - V-dies - Split upper tool set, various other tools

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: Kedpszp Nz Tjfx Ai Redr 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: used, maximum load weight: 23,470 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2024, loading space width: 2,480 mm, loading space height: 3,170 mm, total length: 14,330 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, WIESE SA 3-36-GT / 3-Axle Mega Step-Frame Trailer / Forklift Transporter / 25t Loading Ramp For sale: a WIESE 3-axle Mega step-frame trailer in a special design, configured as a forklift transporter with a hydraulic heavy-duty loading ramp. Type SA 3-36-GT. ----Weights / Dimensions * Permissible total weight: 36,000 kg * Technical saddle load: 12,000 kg * Axle load: 24,000 kg * Tare weight: approx. 11,500 kg, depending on equipment ± 5% Kdedjzvtpnepfx Ai Rsr * Coupling height: approx. 960 mm * Overall height: approx. 4,000 mm * Loading height, low bed: approx. 800 mm * Loading height, high bed: approx. 1,150 mm * Internal height, high bed: approx. 2,820 mm * Internal height, low bed: approx. 3,170 mm * High bed length: approx. 4,000 mm * Low bed length: approx. 9,600 mm * Internal width: approx. 2,480 mm * External width: approx. 2,550 mm ----Chassis / Axles * Weight-optimized steel welded construction * Volume / Mega design * Hole frame with lashing points * Rear area reinforced for heavy-duty ramp * 3 SAF single axles in wide-track design * Air suspension with lifting/lowering * 1st axle as an automatic lift axle * 3rd axle as a friction-guided trailing steering axle, lockable * Tires: 12-ply 205/65 R17.5 on steel rims ----Load securing * Hole frame with lashing possibilities approx. every 250 mm * 4 pairs of 8-t lashing rings on the upper platform * 10 pairs of 8-t lashing rings in the low bed * Multi-X lashing rail in the center of the loading area ----Braking system * EBS from Wabco * Two-line pneumatic braking system * Spring-loaded parking brake * Axle load display via Wabco Smart Board * Display of the axle load in the cab of the corresponding tractor unit ----Floor / Superstructure * High bed with 30 mm sieve-print floor * Low bed with 40 mm sieve-print floor * Steel / checkered plate above the axle assembly * Curtainsider with lateral sliding tarpaulins * Sliding tarp Edscha Profi * 3 rows of aluminum insertion slats * Front wall over the full height ----Heavy-duty loading ramp * Type WFB 25 S * Load capacity: 25,000 kg * Platform length: approx. 5,820 mm * Electro-hydraulic drive * 2-part steel platform * Galvanized heavy-duty grating * Angle reduction for a flatter loading angle * Radio remote control * Additional operation on the control block * Emergency operation via hand pump * 2 hydraulic rear supports * 24-V power supply via NATO connector to the tractor unit ----Special equipment * Bilateral lifting roof, Liftmaster system, lifting height approx. 400 mm * Hydraulically extendable rear portal for maximum passage width * Extended tarpaulins for over-height transport * Separate aluminum loading ramp for accessing the fifth wheel * Work spotlights inside * Reversing lights * RSAB ICE Protect * Ferry lashings * Spare wheel holder * Various storage boxes and strap holders ----Other * Ramp hot-dip galvanized * Outer frame spray-galvanized and painted * TÜV inspection (German technical inspection) * Commissioning protocol Ideal for the transport of forklifts, machines and heavy vehicles. Thanks to the 25-ton loading ramp, the low bed, the lifting roof and the hydraulically extendable rear portal, it is particularly flexible for demanding transport tasks. We are happy to provide you with further information.

Condition: excellent (used), functionality: fully functional, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 4. Beil 425-T-H - 2-hole 425 - table 520-770 Kedpfoztzc Rsx Ai Rjdr 6. Billows- 2 hole 220 - table 860-450 7. Bacher Hand-Table-punch 220 - table 420 x 310 8. Heidelberg SM52 - 425 Register Punch - table 700 x 500 When inquiring, please specify which plate punch you would like us to quote.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed Kdjdpow U Dxfjfx Ai Ror • Stepless feed speed adjustment • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: Nο 5237 2/2002, working width: 300 mm, Equipment: documentation/manual, MAYER OVJA 1.6 ET 3WT is a premium double jersey transfer jacquard knitting machine, known for its exceptional capability in producing intricate designs and multi-colour striped fabrics. With a 30-inch diameter and an 18-gauge specification, this machine ensures the creation of fine, high-quality textiles suitable for various applications. The machine is equipped with 48 feeders, including 32 knitting (K) and 16 transfer (T) feeders, providing a consistent and smooth yarn feed that enhances production efficiency and fabric quality. The LGL compact design allows for optimal space management, making it an ideal choice for factories with limited floor space.Extra 48 memminger D 72277 feeders for lycra included in price. Manufactured in 2002, the OVJA 1.6 ET incorporates robust construction and reliable performance, making it a valuable asset for textile manufacturers seeking to produce superior fabrics with complex jacquard patterns and vibrant colours.The machine is in working condition full production.video is available in production Kdjdpfx Aoybbrpsi Rer

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 7041231, turning diameter: 65 mm, spindle bore: 65 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 450 mm, overall weight: 5,000 kg, Manufacturer: TRAUB Type: TNC 42/65 Year of manufacture: 2007 Control system: TRAUB System TX8i Description: For sale is a TRAUB TNC 42/65 CNC turning machine with twin spindle, Y-axis, powered tools, and LNS Quick Load Servo III bar feeder. Kdedpfxszrl E Tj Ai Ror The machine has extensive equipment and is suitable for complete machining of turned and milled parts in a single setup. The machine is in working order. Due to its age, it is sold without warranty. The condition has not been further assessed and is therefore explicitly offered as used. An inspection while the machine is powered on is possible by appointment. Equipment: - Twin spindle - Main spindle and counter spindle - C-axis main spindle - C-axis counter spindle - Y-axis - Powered tools - VDI tool turret - High-pressure coolant system - LNS Quick Load Servo III bar feeder - Chip conveyor - Memory expansion of the control system to 4 GB - Accessories - Extensive collet assortment - Reducing sleeve - Several reducing rings in various diameters - Additional VDI tool holders - Various spare parts in boxes Known issues: - The telescopic covers have damage, but they still perform their function. - The memory of the control system has been expanded to 4 GB. - Sale due to machine replacement.

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 1-1028-09, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 30 kg, total height: 1,663 mm, total width: 910 mm, total length: 1,232 mm, overall weight: 30 kg, Equipment: documentation/manual, We are offering this used Mahr / Hexagon Optiv Performance MS 442 coordinate measuring machine, year of manufacture 2009. The machine was factory overhauled in 2023, purchased by us, and has seen minimal use since then. Serial number: 1-1028-09 Measuring range: 400x400x200mm Dimensions: 910x1232x1663 Weight: 940kg Maximum workpiece weight on the glass plate: 30kg Includes camera with 2-stage zoom Includes measuring laser Includes LED ring light Accuracy: Length measurement deviation: according to VDI/VDE 2617-6.1 MPEE1: 1.4µm+L/200mm MPEE2: 1.5µm+L/150mm Includes 19" CNC real-time controller based on Windows 10 (32-bit) upgrade kit Includes Renishaw PI200 probe interface Includes Renishaw TP200 probe body Includes Renishaw probe holder Kdsdpfx Aioyf N Iys Rer Includes various probes & heads Includes OptiChek3D software If you have any questions or need further information, please feel free to send us a message.

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick Kdjdezvt Tyjpfx Ai Rjr * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: new, DEMAG brake ring / brake pad / conical brake pad - 50 pieces (new). 1. Type: KB 160 - 2 pieces. 2. Type: KB 100 - 2 pieces. 3. Type: KB 200 - 2 pieces. 4. Type: KB 140 - 2 pieces. 5. Type: KB 125 - 5 pieces. 6. Type: KB 112 - 1 piece. 7. Type: KB 90 - 2 pieces. 8. Type: KB 80 - 11 pieces. 9. Type: No. 405 - 1 piece. Kdjdpfxeyy Taks Ai Rer 10. Type: No. 616 654 - 5 pieces. 11. Type: No. 620 606 - 7 pieces. 12. Type: No. 612 648 44 - 6 pieces. 13. Type: No. 628 626 44 - 2 pieces. DEMAG brake cover / brake lid - 38 pieces. Various sizes (new / used).

Condition: excellent (used), Micrometer make Hommel Precision Measuring range 175 - 200 mm diameter (2852) Test gauge in wooden storage case Kdjdpfx Astt Nugsi Ror

Year of construction: 2016, condition: ready for operation (used), This KEYENCE IM-6025 optical measurement machine was manufactured in 2016. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6025 optical measurement machine. Contact us for more information about this machine. Additional information Kdjdpfx Aoyf Du Usi Rsr • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Clamping device • Glass scale • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Availability: • 2 units availableOptional: Comprehensive package of measuring instruments