Used Hosokawa Micron 20-Mfc-43 for sale (33,289)

Condition: used, Year of construction: 2023, functionality: fully functional, input voltage: 400 V, Vertical mixing line consisting of: Hosokawa Micron 20-MFC-43 conical mixer, year of manufacture 2023, capacity 2,000 kg, total volume 3,350 litres, empty weight approx. 1,350 kg Donaldson Torit DCE dust filter type DCE 125 F, year of manufacture 2023 Ruberg centrifugal sifter type RWS 2-220, year of manufacture 2023 Goudsmit Magnetics magnetic separator 2 screw conveyor lines 400 V Documentation available Ljdjz Ippljpfx Amzsru This lot runs from the 1st to the 2nd floor, up to the 1st ring above the Y-split (rotary valve not included) Dimensions upper section: ø approx. 220 cm Lower section approx. 310 x 290 x 300 cm Mixing installation with round mixing vessel, horizontal mixing unit and several electric motors. Details Configuration: round mixing vessel on frame with horizontal mixing unit Drive: several electric motors Included: pipework and connection pieces Material: metal, partly stainless steel Condition: used

Condition: used, Year of construction: 2002, machine/vehicle number: 6696301000, Used Hosokawa model 20-MSC-43 nauta conical screw mixer. - Working volume: 1700 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2048 mm diameter x 2820 mm cone height / 3523 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with flanges DN200 and DN100 Lredpfox R S Tkjx Amzeu - Non-supported screw agitator: driven by 5.5 kW electric motor, final rpms of screws 70 rpm - Arm: driven by 0.55 kW electric motor, final rpms of arm 1.2 rpm - Includes: discharge valve. - Mounted: (3) lugs.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). Ledpfx Aszvxvasmzeru In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Lodpszvxxnsfx Amzjru Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 2023, condition: used, functionality: fully functional, Online bankruptcy auction – Nenco Food B.V., Berkel en Rodenrijs (NL). Closes Monday 26 October 2026 from 14:00 CET. Viewing Friday 23 October, 10:00–15:00. Hosokawa Alpine hammer mill Type UPZ 500 Year of manufacture 2023 Lrsdpoz Iam Ijfx Amzsu Weight 1,300 kg Capacity / max. 5,910 l/min Dimensions approx. 230 x 110 x 129 cm Documentation available This lot is located in room 3 Hosokawa Alpine hammer mill UPZ 500 with centrifugal fan and electric motor on steel base frame. Details Brand: Hosokawa Alpine Type: UPZ 500 hammer mill with centrifugal fan Drive: electric motor Design: housing with protective cover and connection piece/pipework Frame: steel base frame Colour: grey with blue motor Condition: used Also in this auction: Hosokawa Alpine UPZ 500 hammer mills from 2014 and 2009 (lots 53 and 51) and two Ottevanger HM 650-375 hammer mills, 37 kW, 2023 (lots 50 and 52). Bidding online only, after registration. Dismantling and loading are carried out by Auction Logistics at the buyer's expense; costs are stated per lot.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0509, Technical specifications Manufacturer: STAR Micronics Type: ECAS-20 Year of manufacture: 2011 CNC long-turn lathe Control system: Star Motion Control System Max. turning diameter: 20 mm Spindle stroke: 205 mm CNC axes: 10 Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Spindle power: 2.2 kW / 3.7 kW each (30 min.) C-axis: main and counter spindle Powered tools up to 8,000 rpm Turning tools: 4 front, 2 rear Powered tool positions up to 6 (optional) Drilling diameter max. 10 mm Milling diameter max. 10 mm Thread cutting up to M8 Coolant tank: 120 liters Ljdpfo Aarq Njx Amzoru Connected load: 8 kVA Weight: approx. 3,500 kg Dimensions: 2,588 x 1,150 x 1,765 mm

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Lrsdezxt Snjpfx Amzeu Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. Lredpfxjz Uxmbe Amzsu ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Volume 9980l Weight 2200kg Lrsdpjufy S Hsfx Amzsu

Condition: used, Year of construction: 2011, STAR ECAS-20 — CNC SWISS-TYPE AUTOMATIC LATHE Lrjdpfjz D Ezvsx Amzsu MACHINE IDENTIFICATION — VERIFIED FROM NAMEPLATE Manufacturer: Star Micronics Co., Ltd., Japan Model: ECAS-20 Type: 570 Manufacturing date: March 2011 Serial number: 0509 Lot number: 047 Supply voltage: AC 200 V, three-phase Frequency: 50/60 Hz Rated apparent power: 8.0 kVA Machine weight: 3,500 kg CE marking: Present MODEL SPECIFICATIONS — MANUFACTURER DATA Configuration: 10 axes; independent front/back machining; simultaneous two-tool turning Control system: Star Motion Control System Maximum machining diameter: 20 mm Headstock stroke: 205 mm MAIN AND SUB-SPINDLES Maximum speed: 10,000 rpm each Motor output each: 2.2 kW continuous / 3.7 kW for 30 minutes C-axis indexing: 0.01° each Sub-spindle chucking diameter: 20 mm Front-ejection length: 80 mm Workpiece projection: 30 mm TOOLING Turning positions: 4 front, 2 rear Tool shank: 12 mm; optional 16 mm Sleeve-holder positions: 4; optional 2 rear-end stationary tools Stationary drilling: Ø10 mm Tapping/die-cutting: M8 × 1.25 Optional driven positions: 3 front, 3 rear Driven-tool speed: 8,000 rpm Driven-tool motor: 0.75 kW Driven drilling: Ø8 mm Driven tapping: M6 × 1.0 Milling: Ø10 mm Slotting: 1.5 mm wide × 4 mm deep BACKWORKING Tool positions: 4 Drilling, stationary/driven: Ø10/Ø8 mm Tapping, stationary/driven: M8 × 1.25 / M6 × 1.0 CAPACITY AND DIMENSIONS Coolant tank: 120 litres Machine dimensions (W × D × H): 2,588 × 1,150 × 1,765 mm Overall installation dimensions with peripherals: Unconfirmed EQUIPMENT VISIBLE IN PHOTOGRAPHS Bar-feeding equipment with pendant control Fire-suppression cylinder and automatic CO₂ warning label CNC operator panel

Condition: used, Hosokawa Alpine Turboplex Classifier for ultrafine classification of dry powders. Model 500 ATP-NG (New Generation). Classifier wheel designed for reduced pressure drop and hence power consumption. Classifier manufactured in 2002 for project in Turkey. In storage for the last 8 years. Installed power - 22 kW. Lsdpozvgl Ajfx Amzsru Airflow - 7500 m3/hour. Fineness range - 97% passing 120 - 8 micron. Can be used for separation of powders or for operation in closed circuit with a mill. Feeding introduced either by gravity from above or in airstream from below. Scope of supply includes 55 kW exhaust fan to generate airflow through classifier system. PPDS can supply ancillary equipment and controls to complete system if required. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can provide a full refurbishment service. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Three machines available, each with an exhaust fan. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: refurbished (used), Year of construction: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 used standalone system by Alpine Originals. Technical details: Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope of supply: Hosokawa Alpine Pharmapaktor APC L 200/30, including feeding, without Flake Crusher. The Hosokawa Alpine APC L200/30 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Lrjdpfx Amovq Nlxszju Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 0.75 kW (1.02 HP), For sale: welding fume extractor and soundproof enclosure in good condition with low hours of use. The unit is fully operational and can be tested. Price on request. Lodpfx Ajyk Snmjmzoru

Year of construction: 2022, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Lredjfhmmxjpfx Amzju Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. Materials and surfaces In contact with product: 316 L stainless steel. (1.4404) Ra ᐸ1.2 μm not in contact with product: stainless steel 304 (1.4301) Ra ᐸ1,2μm Drives Three-phase current geared motors Technical data rolls Nominal power (kW): 4,0 Speed (rpm) 3 - 30 voltage: 400 V, 50 Hz Protection class: IP 55 Compacting rollers The rollers for the PHARMAPAKTOR are made of hardened stainless steel. Rollers, roller bearings and bearing seals form a complete unit and are delivered fully assembled. It is therefore not necessary to dismantle the bearings to change the rolls. Roller profile: At your choice roller diameter: 200 mm roller width: 50 mm roller gap: 2.5 mm

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Lrodpfxszvmx Ns Amzou Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row Lrodpfozl E N Esx Amzsu The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 13902, Equipment: low noise, Groninger MFCS 201 RH – Filling, closing, and labeling machine – Year of manufacture: 2021 – Like new For sale is a high-quality, fully automatic filling, closing, and labeling machine from the German manufacturer Groninger GmbH & Co. KG. Type: MFCS 201 RH, machine no. 13902, year of manufacture 2021. The machine was installed and put into operation at our location in Solingen in 2022. The machine has been used very little and is in almost new condition. In total, only approximately 300,000 containers have been filled with it. For the majority of the time, the system was idle and not used in continuous or multi-shift operation. Individual components, in particular the integrated labeling system, were not used at all in our production facility. The verifiable new price of the machine without laminar flow was €630,000 net. The machine is sold without the laminar flow unit. The system is designed for a capacity of up to 60 units/min or approximately 3,600 units/hour. The existing format is designed for micro-screw caps. The documented filling volume is approximately 0.3 ml. The existing container has a diameter of approximately 11 mm and a height of approximately 43.9 mm; the screw cap has a diameter of approximately 13 mm. Other formats are possible; however, format parts would then need to be manufactured. The machine features a Groninger peristaltic/hose pump filling system with a filling needle and automatic filling needle movement. The containers are automatically fed via a vibrating hopper and sorting unit and transported through the machine via a timed conveyor. The screw caps are also sorted and fed fully automatically. The system features pre-closing and final closing stations, closure control, and automatic good/bad part sorting. Integrated is a fully automatic all-round labeling station with a servo-motorized CAB labeling system. In addition, a Markem thermal transfer printer is integrated for variable markings such as batch and date, as well as a check for "print present." The system also features recipe management, user management, diagnostics and service functions, a piece counter, alarm/event displays, and remote maintenance capabilities via a VPN router. Lredpfx Amez R A Sgezju An original Groninger EC/EU declaration of conformity is available. The machine complies with, among other things, Machinery Directive 2006/42/EC and the EMC Directive 2014/30/EU. The complete, extensive Groninger original documentation is available, including operating, maintenance, and repair documents, spare parts and wear parts lists, format documents, pneumatic and layout plans, and FAT documentation. The machine has been professionally disassembled by us and is currently stored safely. The disassembly was documented in a video. We can support the buyer in reassembling the machine and explain the operation and functionality of the machine. Alternatively, Groninger can, of course, be brought in for assembly, commissioning, and service. There is also an existing order for this machine that the new buyer can fulfill if the client wishes. The client is from Switzerland and has an order volume of €60,000 per year. Location: 42699 Solingen, Germany. Inspection possible by appointment. We will gladly provide further technical documents upon request from a seriously interested buyer.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Lodpfx Amoz Iql Iozoru Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine Lodezvgu Dopfx Amzeru YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Lodpfx Amsi Dx Sbszeru

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Ljdpjyzzguofx Amzeru Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, pressing force: 120 t, ram plate length: 4,300 mm, Equipment: CE marking, SAFAN 120-ton, 4300mm CNC Edge Press/Folding Machine Lsdpsz It Sqefx Amzoru Used bending machine / press / edge press Brand: SAFAN Model: [Model number missing in the original text] Year: 2002 Press force: 120 tons Bending length: 4300mm CNC control with touchscreen Front supports Operating manual Electrical and hydraulic diagrams Rear safety gate Side safety gates

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder Lrsdpfx Asztw Ehjmzsu

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Ljdpfx Ajzvmpnsmzeru Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: good (used), functionality: fully functional, Year of construction: 2006, Used M Shear from Safan Model: M Shear 430 6 TS 200 Capacity: 4300 x 6 mm Automatic setting of cutting gap, cutting angle, and back gauge Equipped with pneumatic sheet support at the rear Return to sender feature Lredpsy H D I Eofx Amzou Scrap container Entry safety barrier